| 公開日期 | 標題 | 作者 | 來源出版物 | WOS | 全文 |
| 2015 | Combined Diamond Disks in Chemical Mechanical Polishing | Ming Yi Tsai; Jihng Kuo Ho ; Jyu Lin Zeng | Key Engineering Materials | | |
| 2014 | Development of a novel cooling system-assisted minimum quantity lubrication method for improvement of milling performance | Ho, Jihng Kuo ; Tsai, Che Hsiung; Tsai, Ming Yi; Tu, Ming Xim; Sung, James C. | Journal of the Chinese Institute of Engineers | | |
| 2014 | Development of a Novel Nanodiamond-Impregnated Polishing Pad for Chemical Mechanical Polishing of Oxide Film | Jihng-Kuo Ho ; Che-Hsiung Tsai; Ming-Yi Tsai; Jui-Hsuan Chiang | 中國機械工程學刊 | | |
| 2019 | Dynamic characteristics of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Jun-Kai Chen | | | |
| 2020 | Dynamic vibration of carbon nanotube-reinforced hybrid composite plates | Jihng-Kuo Ho ; Wen-Hua Lo; Yu-Chou Chengz; Chun-Sheng Chen | | | |
| 2024/3/23 | Effect of MoN on the structure and characteristics of MoN/ZrMoN bi-layer nitride films | Hu, Ding-Chiang; Kuo, Dong-Hau; Tsao, Chung-Chen; Ho, Jihng-Kuo ; Kuo, Chin-Guo; Hsu, Chun-Yao | BULLETIN OF MATERIALS SCIENCE | | |
| 2010 | Generation of Tool Paths and Five-axis B-spline Curve NC Commands for Centrifugal Impeller Machining | J.S. Tsai; J. K. Ho ; K. W. Liao; C.Y. Chiu | | | |
| 2020 | Grey-Taguchi-Based Optimization of Wire-Sawing for a Slicing Ceramic | Tsai, Yao-Yang; Ho, Jihng-Kuo ; Wang, Wen-Hao; Hsieh, Chia-Chin; Tsao, Chung-Chen; Hsu, Chun-Yao | Processes | | |
| 2012 | Impregnation of Hydrogenated Graphite in Polyurethane Pad for Improved Performance in Chemical-Mechanical Polishing Processes | Tsai, M. Y.; Ho, J. K. ; Tsai, C. H.; Chen, C. Y. | Advanced Science Letters | 0 | |
| 2022 | Instability of hybrid functionally graded porous plate | Jihng-Kuo Ho ; Ching-Rung Chu; Wei-Zhou Jian; Chun-Sheng Chen | | | |
| 2016 | Investigation of Polishing Pads Impregnated with Fe and Al2O3 Particles for Single-Crystal Silicon Carbide Wafers | Ho, Jihng-Kuo ; Huang, Chih-Yung; Tsai, Ming-Yi; Tsai, Che-Cheng | Applied Sciences | | |
| 2016 | The Machining of Hard Mold Steel by Ultrasonic Assisted End Milling | Tsai, Ming; Chang, Chia; Ho, Jihng | Applied Sciences | | |
| 2014 | Novel method to remove tall diamond grits and improve diamond disk performance | Ho, Jihng Kuo ; Tsai, Che Hsiung; Tsai, Ming Yi; Yeh, Tung Sheng | The International Journal of Advanced Manufacturing Technology | | |
| 2008 | Prediction of cutting forces for face milling process and stresses estimation on cutting edge | C.R. Lin; J.S. Tsai; M.K. Dao; J. K. Ho ; C.K. Chang | | | |
| 2010 | A Study of the Diamond Tools for Grinding Polycrystalline Diamond | S. Y. Luo; J.K. Ho ; M. Y. Tsai; Liu, W. Chen | Advanced Materials Research | | |
| 2019 | Thermal effects on dynamic instability of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Wen-Hsueh Kung | | | |
| 2019 | Ultrasonic-Assisted Innovative Polyurethane Tool to Polish Mold Steel | Ming-Yi Tsai; Yue-Feng Lin; Jihng-Kuo Ho ; Jing-Guang Yang | IJAT | 0 | |
| 2019 | Vibration and stability of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Wen-Hsueh Kung; Jun-Kai Chen | | | |
| 2022 | Vibration characteristics of hybrid functionally graded porous plates | Jihng-Kuo Ho ; Yi-Feng Huang; Yu-Chin Chiang; Chun-Sheng Chen | | | |
| 2020 | 人工膝關節與膝內半月板模型建構 | 何靖國 ; 區文安; 黃祥順; 邱士育; 張宗鈺 | | | |
