研究成果

第 1 到 26 筆結果，共 26 筆。

公開日期標題作者來源出版物WOS全文
12024/3/23Effect of MoN on the structure and characteristics of MoN/ZrMoN bi-layer nitride filmsHu, Ding-Chiang; Kuo, Dong-Hau; Tsao, Chung-Chen; Ho, Jihng-Kuo ; Kuo, Chin-Guo; Hsu, Chun-YaoBULLETIN OF MATERIALS SCIENCE
22022Vibration characteristics of hybrid functionally graded porous platesJihng-Kuo Ho ; Yi-Feng Huang; Yu-Chin Chiang; Chun-Sheng Chen
32022Instability of hybrid functionally graded porous plateJihng-Kuo Ho ; Ching-Rung Chu; Wei-Zhou Jian; Chun-Sheng Chen
42020Grey-Taguchi-Based Optimization of Wire-Sawing for a Slicing CeramicTsai, Yao-Yang; Ho, Jihng-Kuo ; Wang, Wen-Hao; Hsieh, Chia-Chin; Tsao, Chung-Chen; Hsu, Chun-YaoProcesses
52020散熱鰭片的模型建立與打樣技術何靖國 ; 羅雲康; 邱士育; 黃祥順; 張宗鈺
62020人工膝關節與膝內半月板模型建構何靖國 ; 區文安; 黃祥順; 邱士育; 張宗鈺
72020Dynamic vibration of carbon nanotube-reinforced hybrid composite platesJihng-Kuo Ho ; Wen-Hua Lo; Yu-Chou Chengz; Chun-Sheng Chen
82019Dynamic characteristics of hybrid nanocomposite platesChun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Jun-Kai Chen
92019Vibration and stability of hybrid nanocomposite platesChun-Sheng Chen; Jihng-Kuo Ho ; Wen-Hsueh Kung; Jun-Kai Chen
102019Thermal effects on dynamic instability of hybrid nanocomposite platesChun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Wen-Hsueh Kung
112019化學鍍Ni-P薄膜微結構及提升黃銅基材疲勞壽命之研究何靖國 ; 陳建勛; 黃國志; 鄭暐霖; 曾俊賢; 杜世綱; 許春耀
122019微射出成型的製程參數對於含微流道生物晶片特性之影響陳俊生; 何靖國 ; 陳健志
132019射出成型件縫合線強度之探討陳俊生; 何靖國 ; 嚴崇甡; 郭兆祥; 許春耀
142019Ultrasonic-Assisted Innovative Polyurethane Tool to Polish Mold SteelMing-Yi Tsai; Yue-Feng Lin; Jihng-Kuo Ho ; Jing-Guang YangIJAT0
152016The Machining of Hard Mold Steel by Ultrasonic Assisted End MillingTsai, Ming; Chang, Chia; Ho, Jihng Applied Sciences
162016Investigation of Polishing Pads Impregnated with Fe and Al2O3 Particles for Single-Crystal Silicon Carbide WafersHo, Jihng-Kuo ; Huang, Chih-Yung; Tsai, Ming-Yi; Tsai, Che-ChengApplied Sciences
172015Combined Diamond Disks in Chemical Mechanical PolishingMing Yi Tsai; Jihng Kuo Ho ; Jyu Lin Zeng Key Engineering Materials
182014Novel method to remove tall diamond grits and improve diamond disk performanceHo, Jihng Kuo ; Tsai, Che Hsiung; Tsai, Ming Yi; Yeh, Tung ShengThe International Journal of Advanced Manufacturing Technology
192014Development of a novel cooling system-assisted minimum quantity lubrication method for improvement of milling performanceHo, Jihng Kuo ; Tsai, Che Hsiung; Tsai, Ming Yi; Tu, Ming Xim; Sung, James C.Journal of the Chinese Institute of Engineers
202014Development of a Novel Nanodiamond-Impregnated Polishing Pad for Chemical Mechanical Polishing of Oxide FilmJihng-Kuo Ho ; Che-Hsiung Tsai; Ming-Yi Tsai; Jui-Hsuan Chiang中國機械工程學刊
212012Impregnation of Hydrogenated Graphite in Polyurethane Pad for Improved Performance in Chemical-Mechanical Polishing ProcessesTsai, M. Y.; Ho, J. K. ; Tsai, C. H.; Chen, C. Y.Advanced Science Letters0
222010Generation of Tool Paths  and Five-axis B-spline Curve NC Commands for Centrifugal Impeller MachiningJ.S. Tsai; J. K. Ho ; K. W. Liao; C.Y. Chiu
232010A Study of the Diamond Tools for Grinding Polycrystalline DiamondS. Y. Luo; J.K. Ho ; M. Y. Tsai; Liu, W. Chen Advanced Materials Research
242008Prediction of cutting forces for face milling process and stresses estimation on cutting edgeC.R. Lin; J.S. Tsai; M.K. Dao; J. K. Ho ; C.K. Chang
252008鑽石磨削工具製造與多晶鑽石加工之研究何靖國 ; 羅勝益; 蔡哲雄
262006鑽石磨棒磨削多晶鑽石加工之研究羅勝益; 何靖國 ; 余宗翰; 林信憲