第 1 到 27 筆結果,共 27 筆。
公開日期 | 標題 | 作者 | 來源出版物 | WOS | 全文 | |
---|---|---|---|---|---|---|
1 | 2020 | Effects of Milling Time, Zirconia Addition, and Storage Environment on the Radiopacity Performance of Mechanically Milled Bi2O3/ZrO2 Composite Powders | Chen, M. S.; Lin, H. N.; Cheng, Y. C.; Fang, A.; Chen, C. Y.; Pee-Yew Lee ; Lin, C. K. | Materials | 7 | |
2 | 2019 | Effect of Oxygen Concentration and Tantalum Addition on the Formation of High Temperature Bismuth Oxide Phase by Mechanochemical Reaction | Lin, H. N.; Chen, M. S.; Chang, Y. H.; Pee-Yew Lee ; Lin, C. K. | Materials | 5 | |
3 | 2015 | Thermoelectric Properties of Alumina-Doped Bi0.4Sb1.6Te3 Nanocomposites Prepared through Mechanical Alloying and Vacuum Hot Pressing | Lin, C. K.; Chen, M. S.; Cheng, Y. C.; Pee-Yew Lee ; Rong-Tan Huang | Energies | 7 | |
4 | 2008 | Supercapacitive properties of spray pyrolyzed iron-added manganese oxide powders deposited by electrophoretic deposition technique | Wang, S. C.; Chen, C. Y.; Chien, T. C.; Pee-Yew Lee ; Lin, C. K. | Thin Solid Films | 15 | |
5 | 2008 | Characterization of nanocrystalline manganese oxide powder prepared by inert gas condensation | Chen, C. Y.; Lin, C. K.; Tsai, M. H.; Tsay, C. Y.; Pee-Yew Lee ; Chen, G. S. | Ceramics International | 13 | |
6 | 2008 | Preparation and properties of Ti50Cu28Ni15Sn7 bulk metallic glass by vacuum hot pressing | Lin, H. M.; Lin, C. K.; Jeng, R. R.; Bor, H. Y.; Pee-Yew Lee | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science | 0 | |
7 | 2007 | Performance of sol-gel deposited Zn1-xMgxO films used as active channel layer for thin-film transistors | Tsay, C. Y.; Cheng, H. C.; Wang, M. C.; Pee-Yew Lee ; Chen, C. F.; Lin, C. K. | Surface & Coatings Technology | 31 | |
8 | 2007 | Hydrogen absorption performance of mechanically alloyed (Mg2Ni)(100-x) Ti-x powder | Chen, C. Y.; Wang, C. K.; Pee-Yew Lee ; Lin, C. K. | Materials Transactions | 3 | |
9 | 2007 | Preparation and characterization of dual-phase bulk metallic glasses through powder metallurgy route | Pee-Yew Lee ; Chung, S. T.; Lin, C. K.; Tsai, W. T.; Lin, H. M. | Materials Transactions | 2 | |
10 | 2007 | The effect of Ti additions on the hydrogen absorption properties of mechanically alloyed Mg2Ni powders | Lin, C. K.; Wang, C. K.; Pee-Yew Lee ; Lin, H. C.; Lin, K. M. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 13 | |
11 | 2007 | Fabrication of Mg-Y-Cu bulk metallic glass by mechanical alloying and hot consolidation | Pee-Yew Lee ; Liu, W. C.; Lin, C. K.; Huang, J. C. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 16 | |
12 | 2006 | Mg-Y-Cu bulk metallic glass prepared by mechanical alloying and vacuum hot-pressing | Pee-Yew Lee ; Kao, M. C.; Lin, C. K.; Huang, J. C. | Intermetallics | 15 | |
13 | 2006 | Formation and characterization of mechanically alloyed Ti-Cu-Ni-Sn bulk metallic glass composites | Jeng, I. K.; Lin, C. K.; Pee-Yew Lee | Intermetallics | 12 | |
14 | 2005 | Cu-Zr-Ti bulk metallic glass composites produced by mechanical alloying and vacuum hot-pressing | Wang, C. C.; Lin, C. K.; Lin, Y. L.; Chen, J. S.; Jen, R. R.; Pee-Yew Lee | Pricm 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing, Pts 1-5 | 13 | |
15 | 2005 | Glass forming ability in amorphous Ti50Cu35-xNi15Snx alloys prepared by mechanical alloying | Lin, C. K.; Hsu, C. C.; Jeng, R. R.; Lin, Y. L.; Yeh, C. H.; Pee-Yew Lee | Pricm 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing, Pts 1-5 | 7 | |
16 | 2004 | Preparation and thermal stability of mechanically alloyed amorphous Ni-Zr-Ti-Si composites | Hsieh, J. T.; Lin, C. K.; Chen, J. S.; Jeng, R. R.; Lin, Y. L.; Pee-Yew Lee | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 4 | |
17 | 2004 | Preparation and thermal stability of mechanically alloyed Ni-Zr-Ti-Y amorphous powders | Lin, C. K.; Wang, C. C.; Jeng, R. R.; Lin, Y. L.; Yeh, C. H.; Chu, J. P.; Pee-Yew Lee | Intermetallics | 6 | |
18 | 2004 | Structural investigation of iron sulfides synthesized by mechanochemical reaction | Lin, C. K.; Du, C. L.; Chen, G. S.; Louh, R. F.; Pee-Yew Lee ; Lin, H. M. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 10 | |
19 | 2004 | Characterization of Ni57Zr20Ti18Al5 amorphous powder obtained by mechanical alloying | Pee-Yew Lee ; Lin, C. K.; Jeng, I. K.; Wang, C. C.; Chen, G. S. | Materials Chemistry and Physics | 8 | |
20 | 2002 | Investigations of mechanically alloyed Ni-Zr-Ti-Si amorphous alloys with significant supercooled regions | Lin, C. K.; Feng, Y. B.; Pee-Yew Lee ; Wang, L. Y.; Lin, H. M.; Chen, G. S. | Intermetallics | 9 | |
21 | 2002 | Mechanical alloyed Ti-Cu-Ni-Si-B amorphous alloys with significant supercooled liquid region | Jeng, I. K.; Pee-Yew Lee ; Chen, J. S.; Jeng, R. R.; Yeh, C. H.; Lin, C. K. | Intermetallics | 11 | |
22 | 2002 | Consolidation of amorphous Ni-Zr-Ti-Si powders by vacuum hot-pressing method | Pee-Yew Lee ; Hung, S. S.; Hsieh, J. T.; Lin, Y. L.; Lin, C. K. | Intermetallics | 29 | |
23 | 2001 | Preparation and thermal stability of Zr-Ti-Al-Ni-Cu amorphous powders by mechanical alloying technique | Lin, C. K.; Liu, S. W.; Pee-Yew Lee | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science | 27 | |
24 | 2001 | Preparation and characterization of nanocrystalline Nb3Al alloy | Wu, C. Y.; Lin, H. M.; Lin, H. F.; Tai, M. F.; Wang, C. R.; Lin, C. K.; Pee-Yew Lee | Scripta Materialia | 3 | |
25 | 2000 | Formation of NiAl-Al2O3 intermetallic-matrix composite powders by mechanical alloying technique | Lin, C. K.; Hong, S. S.; Pee-Yew Lee | Intermetallics | 54 | |
26 | 1998 | EXAFS studies of amorphous Fe50Ta50 powders during mechanical alloying | Lin, C. K.; Pee-Yew Lee ; Yang, J. L.; Tung, C. Y.; Cheng, N. F.; Hwu, Y. K. | Journal of Non-Crystalline Solids | 19 | |
27 | 1997 | Amorphization reaction of Ni-Ta powders during mechanical alloying | Pee-Yew Lee ; Yang, J. L.; Lin, C. K.; Lin, H. M. | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science | 18 |