Results 1-75 of 75 (Search time: 0.003 seconds).
| Issue Date | Title | Author(s) | Source | scopus | WOS | Fulltext/Archive link | |
|---|---|---|---|---|---|---|---|
| 1 | 2026/2/1 | Growth of sea-urchin-like platinum nanoparticles and their applications | Lee, Pee-Yew ; Wu, Chi-Wei; Lin, Tz-Feng; Kao, Kun-Che; Weng, Chun-Jen; Lu, Guo-Hao; Chen, Cheng-You; Huang, Hung Ji; Lin, Yung-Sheng | ACTA CRYSTALLOGRAPHICA SECTION B-STRUCTURAL SCIENCE CRYSTAL ENGINEERING AND MATERIALS | |||
| 2 | 2025/7/1 | Effects of Chitosan Addition on Mechanical, Surface, and Antibacterial Properties of Three-Dimensional-Printed Photopolymers | Lee, Pee-Yew ; Lin, Yung-Sheng; Hsieh, Fan-Chun; Huang, Chien-Yao; Lu, Yen-Pei | JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME | |||
| 3 | 2025/2/1 | Hyperspectral Analysis of Silicon Nanowires Manufactured Through Metal-Assisted Chemical Etching | Lee, Pee-Yew ; Lu, Guo-Hao; Bai, Yi-Hong; Chen, Cheng-You; Wu, Li-Yan; Weng, Chun-Jen; Huang, Hung Ji; Lin, Yung-Sheng | JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME | |||
| 4 | 2025/1/1 | Synthesis of Nanocrystal-Embedded Bulk Metallic Glass Composites by a Combination of Mechanical Alloying and Vacuum Hot Pressing | Lee, Pee-Yew ; Chang, Pei-Jung; Chen, Chin-Yi; Lin, Chung-Kwei | MATERIALS | |||
| 5 | 2024/6/1 | Effects of Antifoaming Agents on Manufacturing Silver Dendrites Through Fluoride-Assisted Galvanic Replacement Reaction | Lee, Pee-Yew ; Li, Chen-Yu; Bai, Yi-Hong; Huang, Hung Ji; Weng, Chun-Jen; Lin, Yung-Sheng | JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME | |||
| 6 | 2024/3/2 | Effects of thermal treatment on sea-urchin-like platinum nanoparticlese | Huang, Hung Ji; Wu, Li-Yan; Ko, Tsung-Shine; Wu, Chi-Wei; Liu, Chu-Chi; Fan, Jia-Jun; Lee, Pee-Yew ; Lin, Yung-Sheng | APPLIED SURFACE SCIENCE | |||
| 7 | 2023/12/1 | Endodontic Radiopacifying Application of Barium Titanate Prepared through a Combination of Mechanical Milling and Heat Treatment | Lin, Hsiu-Na; Chen, Wei-Wen; Hsu, Chun-Chun; Chen, May-Show; Chang, Pei-Jung; Chang, Wei-Min; Zhang, Fang-Hao; Chen, Chin-Yi; Lee, Pee-Yew ; Lin, Chung-Kwei | MATERIALS | |||
| 8 | 2023 | Effects of Bubbles on Manufacturing Gold Dendrites and Silicon Nanowires Through the Fluoride-Assisted Galvanic Replacement Reaction | Lee, Pee-Yew ; Huang, Hung Ji; Ko, Tsung-Shine; Hung, Ying-Lun; Wu, Li-Yan; Fan, Jia-Jun; Lin, Yung-Sheng | JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME | |||
| 9 | 2022 | Discoloration Improvement by Mechanically-Milled Binary Oxides as Radiopacifier for Mineral Trioxide Aggregates | Lin, Hsiu-Na; Wang, Ling-Chi; Chen, May-Show; Chang, Pei-Jung; Lin, Pin-Yu; Fang, Alex; Chen, Chin-Yi; Lee, Pee-Yew ; Lin, Chung-Kwei | MATERIALS | 0 | ||
| 10 | 2022 | Moisture retention of glycerin solutions with various concentrations: a comparative study | Chen, H. J.; Lee, P. Y. ; Chen, C. Y.; Huang, S. L.; Huang, B. W.; Dai, F. J.; Chau, C. F.; Chen, C. S.; Lin, Y. S. | SCIENTIFIC REPORTS | 2 | ||
| 11 | 2022 | Effect of synthesis time on plasmonic properties of Ag dendritic nanoforests | Huang, Hung Ji; Chang, Han-Wei; Lee, Chia-Yen; Shiao, Ming-Hua; Chiu, Yen-Ling; Lee, Pee-Yew ; Lin, Yung-Sheng | IUCRJ | 0 | ||
| 12 | 2021 | Effect of Tantalum Pentoxide Addition on the Radiopacity Performance of Bi2O3/Ta2O5 Composite Powders Prepared by Mechanical Milling | Lin, Hsiu-Na; Lin, Chung-Kwei; Chang, Pei-Jung; Chang, Wei-Min; Fang, Alex; Chen, Chin-Yi; Yu, Chia-Chun; Lee, Pee-Yew | MATERIALS | 1 | ||
| 13 | 2020 | Effects of Milling Time, Zirconia Addition, and Storage Environment on the Radiopacity Performance of Mechanically Milled Bi2O3/ZrO2 Composite Powders | Chen, M. S.; Lin, H. N.; Cheng, Y. C.; Fang, A.; Chen, C. Y.; Pee-Yew Lee ; Lin, C. K. | Materials | 7 | ||
| 14 | 2019 | Effect of Oxygen Concentration and Tantalum Addition on the Formation of High Temperature Bismuth Oxide Phase by Mechanochemical Reaction | Lin, H. N.; Chen, M. S.; Chang, Y. H.; Pee-Yew Lee ; Lin, C. K. | Materials | 5 | ||
| 15 | 2018 | Evolution of Thermoelectric Properties of Zn4Sb3 Prepared by Mechanical Alloying and Different Consolidation Routes | Pee-Yew Lee ; Lin, P. H. | Energies | 7 | ||
| 16 | 2017 | The wear properties of Ti-based bulk metallic glass composites containing carbon particles | Pee-Yew Lee ; Lin, Y. S.; Hu, C. J.; Hsu, C. F. | Journal of Alloys and Compounds | 4 | ||
| 17 | 2017 | Formation and Corrosion Behavior of Mechanically-Alloyed Cu-Zr-Ti Bulk Metallic Glasses | Pee-Yew Lee ; Cheng, Y. M.; Chen, J. Y.; Hu, C. J. | Metals | 14 | ||
| 18 | 2016 | Wear Behavior of Mechanically Alloyed Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes | Lin, Y. S.; Hsu, C. F.; Chen, J. Y.; Cheng, Y. M.; Pee-Yew Lee | Metals | 5 | ||
| 19 | 2016 | A High Performance Impedance-based Platform for Evaporation Rate Detection | Chou, W. L.; Pee-Yew Lee ; Chen, C. Y.; Lin, Y. H.; Lin, Y. S. | Jove-Journal of Visualized Experiments | 0 | ||
| 20 | 2015 | Thermoelectric Properties of Alumina-Doped Bi0.4Sb1.6Te3 Nanocomposites Prepared through Mechanical Alloying and Vacuum Hot Pressing | Lin, C. K.; Chen, M. S.; Cheng, Y. C.; Pee-Yew Lee ; Rong-Tan Huang | Energies | 7 | ||
| 21 | 2015 | Recent Advances in Applications of Droplet Microfluidics | Chou, W. L.; Pee-Yew Lee ; Yang, C. L.; Huang, W. Y.; Lin, Y. S. | Micromachines | 112 | ||
| 22 | 2014 | Enhancement of the thermoelectric performance in nano-/micro-structured p-type Bi0.4Sb1.6Te3 fabricated by mechanical alloying and vacuum hot pressing | Pee-Yew Lee ; Chen, T. C.; Huang, J. Y.; Hsieh, H. L.; Jang, J. S. C. | Journal of Alloys and Compounds | 13 | ||
| 23 | 2014 | Thermoelectric Properties of Nano/microstructured p-Type Bi0.4Sb1.6Te3 Powders Fabricated by Mechanical Alloying and Vacuum Hot Pressing | Pee-Yew Lee ; Hao, J.; Chao, T. Y.; Huang, J. Y.; Hsieh, H. L.; Hsu, H. C. | Journal of Electronic Materials | 4 | ||
| 24 | 2010 | The oxidation behavior of a Ti50Cu28Ni15Sn7 bulk metallic glass at 400-500 degrees C | Kao, P. C.; Chen, W. S.; Lin, C. L.; Xiao, Z. H.; Hsu, C. F.; Pee-Yew Lee ; Wu Kai | Journal of Alloys and Compounds | 8 | ||
| 25 | 2010 | Microstructure and mechanical properties of mechanically alloyed Al2O3/Ti-Cu-Ni-Sn bulk metallic glass composites prepared by vacuum hot-pressing | Lin, H. M.; Chen, C. Y.; Tsay, C. Y.; Hsu, C. F.; Pee-Yew Lee | Journal of Alloys and Compounds | 13 | ||
| 26 | 2010 | Fabrication and corrosion behavior of Ti-based bulk metallic glass composites containing carbon nanotubes | Chih-Feng Hsu; Hong-Ming Lin; Chung-Kwei Lin; Pee-Yew Lee ; Wu Kai | Journal of Alloys and Compounds | 4 | ||
| 27 | 2009 | Predicting the Glass-Forming-Ability of Alloys by Molecular Dynamics Simulation: A Working Example of Ti-Co Bulk Metallic Glasses | Kao, S. W.; Yang, K. C.; Wang, S. H.; Hwang, C. C.; Pee-Yew Lee ; Chin, T. S.; Rong-Tan Huang | Japanese Journal of Applied Physics | 6 | ||
| 28 | 2008 | Supercapacitive properties of spray pyrolyzed iron-added manganese oxide powders deposited by electrophoretic deposition technique | Wang, S. C.; Chen, C. Y.; Chien, T. C.; Pee-Yew Lee ; Lin, C. K. | Thin Solid Films | 15 | ||
| 29 | 2008 | Characterization of Mechanically Alloyed Ti-based Bulk Metallic Glass Composites Containing Carbon Nanotubes | Hsu, C. F.; Lin, H. M.; Pee-Yew Lee | Advanced Engineering Materials | 8 | ||
| 30 | 2008 | Microstructure and mechanical properties of vacuum hot-pressing SiC/Ti-Cu-Ni-Sn bulk metallic glass composites | Lin, H. M.; Jeng, R. R.; Pee-Yew Lee | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 11 | ||
| 31 | 2008 | Material characterization and corrosion performance of nickel electroplated in supercritical CO2 fluid | Chung, S. T.; Huang, H. C.; Pan, S. J.; Tsai, W. T.; Pee-Yew Lee ; Yang, C. H.; Wu, M. B. | Corrosion Science | 27 | ||
| 32 | 2008 | Characterization of nanocrystalline manganese oxide powder prepared by inert gas condensation | Chen, C. Y.; Lin, C. K.; Tsai, M. H.; Tsay, C. Y.; Pee-Yew Lee ; Chen, G. S. | Ceramics International | 13 | ||
| 33 | 2008 | Preparation and properties of Ti50Cu28Ni15Sn7 bulk metallic glass by vacuum hot pressing | Lin, H. M.; Lin, C. K.; Jeng, R. R.; Bor, H. Y.; Pee-Yew Lee | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science | 0 | ||
| 34 | 2008 | The corrosion behavior of mechanically alloyed Cu-Zr-Ti bulk metallic glasses | Lin, H. M.; Wu, J. K.; Wang, C. C.; Pee-Yew Lee | Materials Letters | 16 | ||
| 35 | 2008 | Synthesis and characterization of bulk amorphous/amorphous composite alloys through powder metallurgy route | Lin, H. M.; Lin, Y. W.; Pee-Yew Lee | Journal of Materials Science | 4 | ||
| 36 | 2007 | Performance of sol-gel deposited Zn1-xMgxO films used as active channel layer for thin-film transistors | Tsay, C. Y.; Cheng, H. C.; Wang, M. C.; Pee-Yew Lee ; Chen, C. F.; Lin, C. K. | Surface & Coatings Technology | 31 | ||
| 37 | 2007 | Hydrogen absorption performance of mechanically alloyed (Mg2Ni)(100-x) Ti-x powder | Chen, C. Y.; Wang, C. K.; Pee-Yew Lee ; Lin, C. K. | Materials Transactions | 3 | ||
| 38 | 2007 | Preparation and characterization of dual-phase bulk metallic glasses through powder metallurgy route | Pee-Yew Lee ; Chung, S. T.; Lin, C. K.; Tsai, W. T.; Lin, H. M. | Materials Transactions | 2 | ||
| 39 | 2007 | Comparison between oxide-reduced and water-atomized copper powders used in making sintered wicks of heat pipe | Chiu, L. H.; Wu, C. H.; Pee-Yew Lee | China Particuology | 10 | ||
| 40 | 2007 | Characterization of Ni57Zr20Ti20Sn3 amorphous powders obtained by mechanical alloying | Wu, H. M.; Hung, S. S.; Pee-Yew Lee | Journal of Alloys and Compounds | 5 | ||
| 41 | 2007 | Consolidation of mechanically alloyed Mg49Y15Cu36 powders by vacuum hot pressing | Pee-Yew Lee ; Lo, C.; Jang, J. S. C. | Journal of Alloys and Compounds | 11 | ||
| 42 | 2007 | The effect of Ti additions on the hydrogen absorption properties of mechanically alloyed Mg2Ni powders | Lin, C. K.; Wang, C. K.; Pee-Yew Lee ; Lin, H. C.; Lin, K. M. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 13 | ||
| 43 | 2007 | Fabrication of Mg-Y-Cu bulk metallic glass by mechanical alloying and hot consolidation | Pee-Yew Lee ; Liu, W. C.; Lin, C. K.; Huang, J. C. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 16 | ||
| 44 | 2007 | Mechanically alloyed tungsten carbide particle/Ti50Cu28Ni15Sn7 glassy alloy matrix composites | Jeng, I. K.; Pee-Yew Lee | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 5 | ||
| 45 | 2006 | Mg-Y-Cu bulk metallic glass prepared by mechanical alloying and vacuum hot-pressing | Pee-Yew Lee ; Kao, M. C.; Lin, C. K.; Huang, J. C. | Intermetallics | 15 | ||
| 46 | 2006 | Formation and characterization of mechanically alloyed Ti-Cu-Ni-Sn bulk metallic glass composites | Jeng, I. K.; Lin, C. K.; Pee-Yew Lee | Intermetallics | 12 | ||
| 47 | 2006 | Mg-Y-Cu bulk nanocrystalline matrix composites containing WC particles | Pee-Yew Lee ; Lo, C.; Jang, J. S. C.; Huang, J. C. | Composite Materials Iv | 6 | ||
| 48 | 2005 | Synthesis of Ti-based bulk metallic glass composites containing WC particles | Jeng, I. K.; Pee-Yew Lee | Materials Transactions | 2 | ||
| 49 | 2005 | Cu-Zr-Ti bulk metallic glass composites produced by mechanical alloying and vacuum hot-pressing | Wang, C. C.; Lin, C. K.; Lin, Y. L.; Chen, J. S.; Jen, R. R.; Pee-Yew Lee | Pricm 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing, Pts 1-5 | 13 | ||
| 50 | 2005 | Glass forming ability in amorphous Ti50Cu35-xNi15Snx alloys prepared by mechanical alloying | Lin, C. K.; Hsu, C. C.; Jeng, R. R.; Lin, Y. L.; Yeh, C. H.; Pee-Yew Lee | Pricm 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing, Pts 1-5 | 7 | ||
| 51 | 2004 | Preparation and thermal stability of mechanically alloyed amorphous Ni-Zr-Ti-Si composites | Hsieh, J. T.; Lin, C. K.; Chen, J. S.; Jeng, R. R.; Lin, Y. L.; Pee-Yew Lee | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 4 | ||
| 52 | 2004 | Preparation and thermal stability of mechanically alloyed Cu-Zr-Ti-Y amorphous powders | Pee-Yew Lee ; Yao, C. J.; Chen, J. S.; Wang, L. Y.; Jeng, R. R.; Lin, Y. L. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 7 | ||
| 53 | 2004 | Preparation and thermal stability of mechanically alloyed Ni-Zr-Ti-Y amorphous powders | Lin, C. K.; Wang, C. C.; Jeng, R. R.; Lin, Y. L.; Yeh, C. H.; Chu, J. P.; Pee-Yew Lee | Intermetallics | 6 | ||
| 54 | 2004 | Structural investigation of iron sulfides synthesized by mechanochemical reaction | Lin, C. K.; Du, C. L.; Chen, G. S.; Louh, R. F.; Pee-Yew Lee ; Lin, H. M. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 10 | ||
| 55 | 2004 | Characterization of Ni57Zr20Ti18Al5 amorphous powder obtained by mechanical alloying | Pee-Yew Lee ; Lin, C. K.; Jeng, I. K.; Wang, C. C.; Chen, G. S. | Materials Chemistry and Physics | 8 | ||
| 56 | 2002 | Investigations of mechanically alloyed Ni-Zr-Ti-Si amorphous alloys with significant supercooled regions | Lin, C. K.; Feng, Y. B.; Pee-Yew Lee ; Wang, L. Y.; Lin, H. M.; Chen, G. S. | Intermetallics | 9 | ||
| 57 | 2002 | Mechanical alloyed Ti-Cu-Ni-Si-B amorphous alloys with significant supercooled liquid region | Jeng, I. K.; Pee-Yew Lee ; Chen, J. S.; Jeng, R. R.; Yeh, C. H.; Lin, C. K. | Intermetallics | 11 | ||
| 58 | 2002 | Consolidation of amorphous Ni-Zr-Ti-Si powders by vacuum hot-pressing method | Pee-Yew Lee ; Hung, S. S.; Hsieh, J. T.; Lin, Y. L.; Lin, C. K. | Intermetallics | 29 | ||
| 59 | 2002 | Formation of Cu-Zr-Ni amorphous powders with significant supercooled liquid region by mechanical alloying technique | Hu, C. J.; Pee-Yew Lee | Materials Chemistry and Physics | 28 | ||
| 60 | 2001 | Preparation and thermal stability of Zr-Ti-Al-Ni-Cu amorphous powders by mechanical alloying technique | Lin, C. K.; Liu, S. W.; Pee-Yew Lee | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science | 27 | ||
| 61 | 2001 | Preparation and characterization of nanocrystalline Nb3Al alloy | Wu, C. Y.; Lin, H. M.; Lin, H. F.; Tai, M. F.; Wang, C. R.; Lin, C. K.; Pee-Yew Lee | Scripta Materialia | 3 | ||
| 62 | 2000 | Formation of NiAl-Al2O3 intermetallic-matrix composite powders by mechanical alloying technique | Lin, C. K.; Hong, S. S.; Pee-Yew Lee | Intermetallics | 54 | ||
| 63 | 2000 | The effect of boron on the microstructure and mechanical behavior of an Ni-19Si-3Nb based alloy | Jang, J. S. C.; Wong, S. K.; Pee-Yew Lee | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 14 | ||
| 64 | 2000 | Effect of surface modification on room temperature tensile properties for Fe-18Al and Fe-18Al-5Cr alloys | Chiu, L. H.; Pee-Yew Lee ; Chang, C. L. | Materials and Manufacturing Processes | 1 | ||
| 65 | 1998 | EXAFS studies of amorphous Fe50Ta50 powders during mechanical alloying | Lin, C. K.; Pee-Yew Lee ; Yang, J. L.; Tung, C. Y.; Cheng, N. F.; Hwu, Y. K. | Journal of Non-Crystalline Solids | 19 | ||
| 66 | 1998 | Microstructure evolution of mechanical alloyed Ni-24 at % Si | Jang, J. S. C.; Tsau, C. H.; Chen, W. D.; Pee-Yew Lee | Journal of Materials Science | 9 | ||
| 67 | 1998 | Amorphization behaviour in mechanically alloyed Ni-Ta powders | Pee-Yew Lee ; Yang, J. L.; Lin, H. M. | Journal of Materials Science | 24 | ||
| 68 | 1997 | Improvement of environmental degradation resistance of Fe-Al-based alloys by surface modification treatments | Pee-Yew Lee ; Chiu, L. H.; Yang, C. F.; Chen, W. D.; Kai, W.; Chu, J. P. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 8 | ||
| 69 | 1997 | High temperature corrosion behavior of iron aluminides containing ternary additions in H2/H2S/H2O mixed gases | Chu, J. P.; Pee-Yew Lee ; Wu Kai ; Rong-Tan Huang | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | |||
| 70 | 1997 | Amorphization reaction of Ni-Ta powders during mechanical alloying | Pee-Yew Lee ; Yang, J. L.; Lin, C. K.; Lin, H. M. | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science | 18 | ||
| 71 | 1997 | Solid-state amorphization in Ta-based alloy system by mechanical alloying technique | Pee-Yew Lee ; Yang, J. L. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 11 | ||
| 72 | 1997 | High-temperature sulfidation of Al- and Mo-modified 310 stainless steel | Kai, W.; Leu, C. T.; Chu, J. P.; Pee-Yew Lee | High Temperature Corrosion and Protection of Materials 4, Pts 1 and 2 | 0 | ||
| 73 | 1996 | Amorphization behavior of mechanical alloyed Co-Ta alloy powders prepared by ball milling | Pee-Yew Lee ; Yang, J. L. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 1 | ||
| 74 | 1995 | STRUCTURE AND MAGNETIC-PROPERTIES OF MECHANICALLY ALLOYED IRON NITRIDE POWDERS | Pee-Yew Lee ; Chen, T. R.; Chin, T. S. | Journal of Alloys and Compounds | 20 | ||
| 75 | 1995 | SYNTHESIS OF MOSI2 POWDER BY MECHANICAL ALLOYING | Pee-Yew Lee ; Chen, T. R.; Yang, J. L.; Chin, T. S. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 38 |
