研究成果

全部

期刊文章

依作者

主題

依日期

依類型

全文

69 no fulltext

第 1 到 69 筆結果，共 69 筆。

	公開日期	標題	作者	來源出版物	WOS
1	2023/12/1	Endodontic Radiopacifying Application of Barium Titanate Prepared through a Combination of Mechanical Milling and Heat Treatment	Lin, Hsiu-Na; Chen, Wei-Wen; Hsu, Chun-Chun; Chen, May-Show; Chang, Pei-Jung; Chang, Wei-Min; Zhang, Fang-Hao; Chen, Chin-Yi; Lee, Pee-Yew ; Lin, Chung-Kwei	MATERIALS
2	2023	Effects of Bubbles on Manufacturing Gold Dendrites and Silicon Nanowires Through the Fluoride-Assisted Galvanic Replacement Reaction	Lee, Pee-Yew ; Huang, Hung Ji; Ko, Tsung-Shine; Hung, Ying-Lun; Wu, Li-Yan; Fan, Jia-Jun; Lin, Yung-Sheng	JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
3	2022	Discoloration Improvement by Mechanically-Milled Binary Oxides as Radiopacifier for Mineral Trioxide Aggregates	Lin, Hsiu-Na; Wang, Ling-Chi; Chen, May-Show; Chang, Pei-Jung; Lin, Pin-Yu; Fang, Alex; Chen, Chin-Yi; Lee, Pee-Yew ; Lin, Chung-Kwei	MATERIALS	0
4	2022	Moisture retention of glycerin solutions with various concentrations: a comparative study	Chen, H. J.; Lee, P. Y. ; Chen, C. Y.; Huang, S. L.; Huang, B. W.; Dai, F. J.; Chau, C. F.; Chen, C. S.; Lin, Y. S.	SCIENTIFIC REPORTS	2
5	2022	Effect of synthesis time on plasmonic properties of Ag dendritic nanoforests	Huang, Hung Ji; Chang, Han-Wei; Lee, Chia-Yen; Shiao, Ming-Hua; Chiu, Yen-Ling; Lee, Pee-Yew ; Lin, Yung-Sheng	IUCRJ	0
6	2021	Effect of Tantalum Pentoxide Addition on the Radiopacity Performance of Bi2O3/Ta2O5 Composite Powders Prepared by Mechanical Milling	Lin, Hsiu-Na; Lin, Chung-Kwei; Chang, Pei-Jung; Chang, Wei-Min; Fang, Alex; Chen, Chin-Yi; Yu, Chia-Chun; Lee, Pee-Yew	MATERIALS	1
7	2020	Effects of Milling Time, Zirconia Addition, and Storage Environment on the Radiopacity Performance of Mechanically Milled Bi2O3/ZrO2 Composite Powders	Chen, M. S.; Lin, H. N.; Cheng, Y. C.; Fang, A.; Chen, C. Y.; Pee-Yew Lee ; Lin, C. K.	Materials	7
8	2019	Effect of Oxygen Concentration and Tantalum Addition on the Formation of High Temperature Bismuth Oxide Phase by Mechanochemical Reaction	Lin, H. N.; Chen, M. S.; Chang, Y. H.; Pee-Yew Lee ; Lin, C. K.	Materials	5
9	2018	Evolution of Thermoelectric Properties of Zn4Sb3 Prepared by Mechanical Alloying and Different Consolidation Routes	Pee-Yew Lee ; Lin, P. H.	Energies	7
10	2017	The wear properties of Ti-based bulk metallic glass composites containing carbon particles	Pee-Yew Lee ; Lin, Y. S.; Hu, C. J.; Hsu, C. F.	Journal of Alloys and Compounds	4
11	2017	Formation and Corrosion Behavior of Mechanically-Alloyed Cu-Zr-Ti Bulk Metallic Glasses	Pee-Yew Lee ; Cheng, Y. M.; Chen, J. Y.; Hu, C. J.	Metals	14
12	2016	Wear Behavior of Mechanically Alloyed Ti-Based Bulk Metallic Glass Composites Containing Carbon Nanotubes	Lin, Y. S.; Hsu, C. F.; Chen, J. Y.; Cheng, Y. M.; Pee-Yew Lee	Metals	5
13	2016	A High Performance Impedance-based Platform for Evaporation Rate Detection	Chou, W. L.; Pee-Yew Lee ; Chen, C. Y.; Lin, Y. H.; Lin, Y. S.	Jove-Journal of Visualized Experiments	0
14	2015	Thermoelectric Properties of Alumina-Doped Bi0.4Sb1.6Te3 Nanocomposites Prepared through Mechanical Alloying and Vacuum Hot Pressing	Lin, C. K.; Chen, M. S.; Cheng, Y. C.; Pee-Yew Lee ; Rong-Tan Huang	Energies	7
15	2015	Recent Advances in Applications of Droplet Microfluidics	Chou, W. L.; Pee-Yew Lee ; Yang, C. L.; Huang, W. Y.; Lin, Y. S.	Micromachines	112
16	2014	Enhancement of the thermoelectric performance in nano-/micro-structured p-type Bi0.4Sb1.6Te3 fabricated by mechanical alloying and vacuum hot pressing	Pee-Yew Lee ; Chen, T. C.; Huang, J. Y.; Hsieh, H. L.; Jang, J. S. C.	Journal of Alloys and Compounds	13
17	2014	Thermoelectric Properties of Nano/microstructured p-Type Bi0.4Sb1.6Te3 Powders Fabricated by Mechanical Alloying and Vacuum Hot Pressing	Pee-Yew Lee ; Hao, J.; Chao, T. Y.; Huang, J. Y.; Hsieh, H. L.; Hsu, H. C.	Journal of Electronic Materials	4
18	2010	The oxidation behavior of a Ti50Cu28Ni15Sn7 bulk metallic glass at 400-500 degrees C	Kao, P. C.; Chen, W. S.; Lin, C. L.; Xiao, Z. H.; Hsu, C. F.; Pee-Yew Lee ; Wu Kai	Journal of Alloys and Compounds	8
19	2010	Microstructure and mechanical properties of mechanically alloyed Al2O3/Ti-Cu-Ni-Sn bulk metallic glass composites prepared by vacuum hot-pressing	Lin, H. M.; Chen, C. Y.; Tsay, C. Y.; Hsu, C. F.; Pee-Yew Lee	Journal of Alloys and Compounds	13
20	2010	Fabrication and corrosion behavior of Ti-based bulk metallic glass composites containing carbon nanotubes	Chih-Feng Hsu; Hong-Ming Lin; Chung-Kwei Lin; Pee-Yew Lee ; Wu Kai	Journal of Alloys and Compounds	4
21	2009	Predicting the Glass-Forming-Ability of Alloys by Molecular Dynamics Simulation: A Working Example of Ti-Co Bulk Metallic Glasses	Kao, S. W.; Yang, K. C.; Wang, S. H.; Hwang, C. C.; Pee-Yew Lee ; Chin, T. S.; Rong-Tan Huang	Japanese Journal of Applied Physics	6
22	2008	Supercapacitive properties of spray pyrolyzed iron-added manganese oxide powders deposited by electrophoretic deposition technique	Wang, S. C.; Chen, C. Y.; Chien, T. C.; Pee-Yew Lee ; Lin, C. K.	Thin Solid Films	15
23	2008	Characterization of Mechanically Alloyed Ti-based Bulk Metallic Glass Composites Containing Carbon Nanotubes	Hsu, C. F.; Lin, H. M.; Pee-Yew Lee	Advanced Engineering Materials	8
24	2008	Microstructure and mechanical properties of vacuum hot-pressing SiC/Ti-Cu-Ni-Sn bulk metallic glass composites	Lin, H. M.; Jeng, R. R.; Pee-Yew Lee	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	11
25	2008	Material characterization and corrosion performance of nickel electroplated in supercritical CO2 fluid	Chung, S. T.; Huang, H. C.; Pan, S. J.; Tsai, W. T.; Pee-Yew Lee ; Yang, C. H.; Wu, M. B.	Corrosion Science	27
26	2008	Characterization of nanocrystalline manganese oxide powder prepared by inert gas condensation	Chen, C. Y.; Lin, C. K.; Tsai, M. H.; Tsay, C. Y.; Pee-Yew Lee ; Chen, G. S.	Ceramics International	13
27	2008	Preparation and properties of Ti50Cu28Ni15Sn7 bulk metallic glass by vacuum hot pressing	Lin, H. M.; Lin, C. K.; Jeng, R. R.; Bor, H. Y.; Pee-Yew Lee	Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science	0
28	2008	The corrosion behavior of mechanically alloyed Cu-Zr-Ti bulk metallic glasses	Lin, H. M.; Wu, J. K.; Wang, C. C.; Pee-Yew Lee	Materials Letters	16
29	2008	Synthesis and characterization of bulk amorphous/amorphous composite alloys through powder metallurgy route	Lin, H. M.; Lin, Y. W.; Pee-Yew Lee	Journal of Materials Science	4
30	2007	Performance of sol-gel deposited Zn1-xMgxO films used as active channel layer for thin-film transistors	Tsay, C. Y.; Cheng, H. C.; Wang, M. C.; Pee-Yew Lee ; Chen, C. F.; Lin, C. K.	Surface & Coatings Technology	31
31	2007	Hydrogen absorption performance of mechanically alloyed (Mg2Ni)(100-x) Ti-x powder	Chen, C. Y.; Wang, C. K.; Pee-Yew Lee ; Lin, C. K.	Materials Transactions	3
32	2007	Preparation and characterization of dual-phase bulk metallic glasses through powder metallurgy route	Pee-Yew Lee ; Chung, S. T.; Lin, C. K.; Tsai, W. T.; Lin, H. M.	Materials Transactions	2
33	2007	Comparison between oxide-reduced and water-atomized copper powders used in making sintered wicks of heat pipe	Chiu, L. H.; Wu, C. H.; Pee-Yew Lee	China Particuology	10
34	2007	Characterization of Ni57Zr20Ti20Sn3 amorphous powders obtained by mechanical alloying	Wu, H. M.; Hung, S. S.; Pee-Yew Lee	Journal of Alloys and Compounds	5
35	2007	Consolidation of mechanically alloyed Mg49Y15Cu36 powders by vacuum hot pressing	Pee-Yew Lee ; Lo, C.; Jang, J. S. C.	Journal of Alloys and Compounds	11
36	2007	The effect of Ti additions on the hydrogen absorption properties of mechanically alloyed Mg2Ni powders	Lin, C. K.; Wang, C. K.; Pee-Yew Lee ; Lin, H. C.; Lin, K. M.	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	13
37	2007	Fabrication of Mg-Y-Cu bulk metallic glass by mechanical alloying and hot consolidation	Pee-Yew Lee ; Liu, W. C.; Lin, C. K.; Huang, J. C.	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	16
38	2007	Mechanically alloyed tungsten carbide particle/Ti50Cu28Ni15Sn7 glassy alloy matrix composites	Jeng, I. K.; Pee-Yew Lee	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	5
39	2006	Mg-Y-Cu bulk metallic glass prepared by mechanical alloying and vacuum hot-pressing	Pee-Yew Lee ; Kao, M. C.; Lin, C. K.; Huang, J. C.	Intermetallics	15
40	2006	Formation and characterization of mechanically alloyed Ti-Cu-Ni-Sn bulk metallic glass composites	Jeng, I. K.; Lin, C. K.; Pee-Yew Lee	Intermetallics	12
41	2006	Mg-Y-Cu bulk nanocrystalline matrix composites containing WC particles	Pee-Yew Lee ; Lo, C.; Jang, J. S. C.; Huang, J. C.	Composite Materials Iv	6
42	2005	Synthesis of Ti-based bulk metallic glass composites containing WC particles	Jeng, I. K.; Pee-Yew Lee	Materials Transactions	2
43	2005	Cu-Zr-Ti bulk metallic glass composites produced by mechanical alloying and vacuum hot-pressing	Wang, C. C.; Lin, C. K.; Lin, Y. L.; Chen, J. S.; Jen, R. R.; Pee-Yew Lee	Pricm 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing, Pts 1-5	13
44	2005	Glass forming ability in amorphous Ti50Cu35-xNi15Snx alloys prepared by mechanical alloying	Lin, C. K.; Hsu, C. C.; Jeng, R. R.; Lin, Y. L.; Yeh, C. H.; Pee-Yew Lee	Pricm 5: The Fifth Pacific Rim International Conference on Advanced Materials and Processing, Pts 1-5	7
45	2004	Preparation and thermal stability of mechanically alloyed amorphous Ni-Zr-Ti-Si composites	Hsieh, J. T.; Lin, C. K.; Chen, J. S.; Jeng, R. R.; Lin, Y. L.; Pee-Yew Lee	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	4
46	2004	Preparation and thermal stability of mechanically alloyed Cu-Zr-Ti-Y amorphous powders	Pee-Yew Lee ; Yao, C. J.; Chen, J. S.; Wang, L. Y.; Jeng, R. R.; Lin, Y. L.	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	7
47	2004	Preparation and thermal stability of mechanically alloyed Ni-Zr-Ti-Y amorphous powders	Lin, C. K.; Wang, C. C.; Jeng, R. R.; Lin, Y. L.; Yeh, C. H.; Chu, J. P.; Pee-Yew Lee	Intermetallics	6
48	2004	Structural investigation of iron sulfides synthesized by mechanochemical reaction	Lin, C. K.; Du, C. L.; Chen, G. S.; Louh, R. F.; Pee-Yew Lee ; Lin, H. M.	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	10
49	2004	Characterization of Ni57Zr20Ti18Al5 amorphous powder obtained by mechanical alloying	Pee-Yew Lee ; Lin, C. K.; Jeng, I. K.; Wang, C. C.; Chen, G. S.	Materials Chemistry and Physics	8
50	2002	Investigations of mechanically alloyed Ni-Zr-Ti-Si amorphous alloys with significant supercooled regions	Lin, C. K.; Feng, Y. B.; Pee-Yew Lee ; Wang, L. Y.; Lin, H. M.; Chen, G. S.	Intermetallics	9
51	2002	Mechanical alloyed Ti-Cu-Ni-Si-B amorphous alloys with significant supercooled liquid region	Jeng, I. K.; Pee-Yew Lee ; Chen, J. S.; Jeng, R. R.; Yeh, C. H.; Lin, C. K.	Intermetallics	11
52	2002	Consolidation of amorphous Ni-Zr-Ti-Si powders by vacuum hot-pressing method	Pee-Yew Lee ; Hung, S. S.; Hsieh, J. T.; Lin, Y. L.; Lin, C. K.	Intermetallics	29
53	2002	Formation of Cu-Zr-Ni amorphous powders with significant supercooled liquid region by mechanical alloying technique	Hu, C. J.; Pee-Yew Lee	Materials Chemistry and Physics	28
54	2001	Preparation and thermal stability of Zr-Ti-Al-Ni-Cu amorphous powders by mechanical alloying technique	Lin, C. K.; Liu, S. W.; Pee-Yew Lee	Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science	27
55	2001	Preparation and characterization of nanocrystalline Nb3Al alloy	Wu, C. Y.; Lin, H. M.; Lin, H. F.; Tai, M. F.; Wang, C. R.; Lin, C. K.; Pee-Yew Lee	Scripta Materialia	3
56	2000	Formation of NiAl-Al2O3 intermetallic-matrix composite powders by mechanical alloying technique	Lin, C. K.; Hong, S. S.; Pee-Yew Lee	Intermetallics	54
57	2000	The effect of boron on the microstructure and mechanical behavior of an Ni-19Si-3Nb based alloy	Jang, J. S. C.; Wong, S. K.; Pee-Yew Lee	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	14
58	2000	Effect of surface modification on room temperature tensile properties for Fe-18Al and Fe-18Al-5Cr alloys	Chiu, L. H.; Pee-Yew Lee ; Chang, C. L.	Materials and Manufacturing Processes	1
59	1998	EXAFS studies of amorphous Fe50Ta50 powders during mechanical alloying	Lin, C. K.; Pee-Yew Lee ; Yang, J. L.; Tung, C. Y.; Cheng, N. F.; Hwu, Y. K.	Journal of Non-Crystalline Solids	19
60	1998	Microstructure evolution of mechanical alloyed Ni-24 at % Si	Jang, J. S. C.; Tsau, C. H.; Chen, W. D.; Pee-Yew Lee	Journal of Materials Science	9
61	1998	Amorphization behaviour in mechanically alloyed Ni-Ta powders	Pee-Yew Lee ; Yang, J. L.; Lin, H. M.	Journal of Materials Science	24
62	1997	Improvement of environmental degradation resistance of Fe-Al-based alloys by surface modification treatments	Pee-Yew Lee ; Chiu, L. H.; Yang, C. F.; Chen, W. D.; Kai, W.; Chu, J. P.	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	8
63	1997	High temperature corrosion behavior of iron aluminides containing ternary additions in H2/H2S/H2O mixed gases	Chu, J. P.; Pee-Yew Lee ; Wu Kai ; Rong-Tan Huang	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
64	1997	Amorphization reaction of Ni-Ta powders during mechanical alloying	Pee-Yew Lee ; Yang, J. L.; Lin, C. K.; Lin, H. M.	Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science	18
65	1997	Solid-state amorphization in Ta-based alloy system by mechanical alloying technique	Pee-Yew Lee ; Yang, J. L.	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	11
66	1997	High-temperature sulfidation of Al- and Mo-modified 310 stainless steel	Kai, W.; Leu, C. T.; Chu, J. P.; Pee-Yew Lee	High Temperature Corrosion and Protection of Materials 4, Pts 1 and 2	0
67	1996	Amorphization behavior of mechanical alloyed Co-Ta alloy powders prepared by ball milling	Pee-Yew Lee ; Yang, J. L.	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	1
68	1995	STRUCTURE AND MAGNETIC-PROPERTIES OF MECHANICALLY ALLOYED IRON NITRIDE POWDERS	Pee-Yew Lee ; Chen, T. R.; Chin, T. S.	Journal of Alloys and Compounds	20
69	1995	SYNTHESIS OF MOSI2 POWDER BY MECHANICAL ALLOYING	Pee-Yew Lee ; Chen, T. R.; Yang, J. L.; Chin, T. S.	Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing	38

研究成果 (全部) 全部 期刊文章 顯示/隱藏過濾條件

依作者

主題

依日期

依類型

全文

研究成果

全部

期刊文章