第 1 到 62 筆結果,共 62 筆。
公開日期 | 標題 | 作者 | 來源出版物 | WOS | 全文 | |
---|---|---|---|---|---|---|
1 | 2022 | Design and Testing of a Bearingless Piezo Jet Micro Heatsink | Wang, Rong-Tsu; Wang, Jung-Chang ; Chen, Sih-Li | J MAR SCI TECH-TAIW | 2 | |
2 | 2022 | Investigations on Temperatures of the Flat Insert Mold Cavity Using VCRHCS with CFD Simulation | Wang, Rong-Tsu; Wang, Jung-Chang ; Chen, Sih-Li | POLYMERS | 1 | |
3 | 2021 | An Overview on the Novel Core-Shell Electrodes for Solid Oxide Fuel Cell (SOFC) Using Polymeric Methodology | Wang, Rong-Tsu; Chang, Horng-Yi ; Wang, Jung-Chang | POLYMERS-BASEL | 4 | |
4 | 2021 | PMMA Application in Piezo Actuation Jet for Dissipating Heat of Electronic Devices | Chang, Yu-Teng; Wang, Rong-Tsu; Wang, Jung-Chang | POLYMERS-BASEL | 3 | |
5 | 2021 | Estimations on Properties of Redox Reactions to Electrical Energy and Storage Device of Thermoelectric Pipe (TEP) Using Polymeric Nanofluids | Gang, Qin; Wang, Rong-Tsu; Wang, Jung-Chang | POLYMERS | 2 | |
6 | 2021 | Application of self-heating graphene reinforced polyvinyl alcohol nanowires to high-sensitivity humidity detection | Chen, Zhao-Chi; Chang, Tien-Li; Su, Kai-Wen; Lee, Hsin-Sheng; Wang, Jung-Chang | SENSOR ACTUAT B-CHEM | 12 | |
7 | 2019 | Power generation and electric charge density with temperature effect of alumina nanofluids using dimensional analysis | Pi-HsiaYen; Jung-Chang Wang | Energy Conversion and Management | 14 | |
8 | 2017 | Analysis of thermal conductivity in HI-LEDs lighting materials | Rong-Tsu Wang; Jung-Chang Wang | Journal of Mechanical Science and Technology | 4 | |
9 | 2017 | Intelligent dimensional and thermal performance analysis of Al2O3 nanofluid | Wang, Rong-Tsu; Wang, Jung-Chang | ENERG CONVERS MANAGE | 18 | |
10 | 2017 | 到港期間輔助鍋爐使用廢油之可行性探討 | 李國隆; 王榮昌 | 船舶科技 | 0 | |
11 | 2016 | Analyzing the structural designs and thermal performance of nonmetal lighting devices of LED bulbs | Rong-Tsu Wang; Jung-Chang Wang | International Journal of Heat and Mass Transfer | 12 | |
12 | 2016 | 導熱高分子複合材料熱傳導係數標準量測之建立 | 王榮昌 ; 楊嘉安; 葉力瑋 | 熱管理產業通訊 | ||
13 | 2016 | 以熱阻方法逆向求解大型船舶機艙熱分佈情形 | 王榮昌 ; 楊嘉安; 林暐峻; 陳彥均 | 熱管理產業通訊 | ||
14 | 2015 | Optimization of heat flow analysis for exceeding hundred watts in HI-LEDs projectors | Rong-Tsu Wang; Jung-Chang Wang | International Communications in Heat and Mass Transfer | 6 | |
15 | 2015 | 三種LED散熱基板材料熱流照明性能分析之探討 | 劉冠慶; 劉國辰; 王榮昌 | 熱管理產業通訊 | ||
16 | 2014 | L- and U-shaped heat pipes thermal modules with twin fans for cooling of electronic system under variable heat source areas | Jung-Chang Wang | Heat and Mass Transfer | 6 | |
17 | 2014 | Performance effects of heat transfer and geometry on heat pipe thermal modules under forced convection | Rong-Tsu Wang; Ya-Wei Lee; Sih-Li Chen; Jung-Chang Wang | International Communications in Heat and Mass Transfer | 6 | |
18 | 2014 | U- and L-shaped heat pipes heat sinks for cooling electronic components employed a least square smoothing method | Jung-Chang Wang | Microelectronics Reliability | 23 | |
19 | 2014 | Thermal module design and analysis of a 230 W LED illumination lamp under three incline angles | Jung-Chang Wang | Microelectronics Journal | 20 | |
20 | 2014 | Analysis of thermal damage to laser irradiated tissue based on the dual-phase-lag model | Kuo-Chi Liu; Jung-Chang Wang | International Journal of Heat and Mass Transfer | 65 | |
21 | 2014 | 探討船舶與海運人員靈性對於兩岸貨資的重要性 | 呂亦筑; 陳錫琦; 王榮祖; 王榮昌 | 船舶科技 | 0 | |
22 | 2014 | Thermoelectric Performances of Seawater and Al2O3 Nanofluids using Battery Facility | Jung-Chang Wang ; L. Ye | Advanced Shipping and Ocean Engineering | ||
23 | 2014 | Analyzing Thermal Module Developments and Trends in High-Power LED | Jung-Chang Wang | International Journal of Photoenergy | 7 | |
24 | 2014 | 雙壓電片致動噴流風扇 | 邱千瑋; 王榮昌 | 熱管理產業通訊 | ||
25 | 2013 | Thermoelectric transformation and illuminative performance analysis of a novel LED-MGVC device | Jung-Chang Wang | International Communications in Heat and Mass Transfer | 12 | |
26 | 2013 | Researches on Thermo-Electric Properties of Seawater and Al2O3 Nanofluids | Jung-Chang Wang ; Wen Chou Chiang | Applied Mechanics and Materials | 0 | |
27 | 2013 | Thermal Performance of a Vapor Chamber-Based Plate of High-Power Light-Emitting Diodes Filled with Al2O3 Nanofluid | Jung-Chang Wang ; Teng-Chieh Chen; Cherng-Yuan Lin | Journal of Nanoscience and Nanotechnology | 10 | |
28 | 2013 | 熱流分析孔洞式結構體作用在LED球泡燈 | 王榮昌 ; 游富雄 | 熱管理產業通訊 | ||
29 | 2012 | 3-D numerical and experimental models for flat and embedded heat pipes applied in high-end VGA card cooling system | Jung-Chang Wang | International Communications in Heat and Mass Transfer | 10 | |
30 | 2012 | Analyzing the pressure-difference phenomenon between the condensing and boiling sections in a heat pipe cooling system | Rong-Tsu Wang; Jung-Chang Wang | International Communications in Heat and Mass Transfer | 8 | |
31 | 2012 | Novel green illumination energy for LED with ocean battery materials | Jung-Chang Wang | International Journal of Materials & Product Technology | 4 | |
32 | 2012 | U型熱管熱沉散熱模組在不同熱源面積下之熱性能研究 | 王榮昌 ; 陳韋睿 | 熱管理產業通訊 | ||
33 | 2011 | Analysis of suspension and heat transfer characteristics of Al2O3 nanofluids prepared through ultrasonic vibration | Cherng-Yuan Lin ; Jung-Chang Wang ; Teng-Chieh Chen | Applied Energy | 78 | |
34 | 2011 | Thermal investigations on LED vapor chamber-based plates | Jung-Chang Wang | International Communications in Heat and Mass Transfer | 77 | |
35 | 2011 | A NOVEL FORMULA FOR EFFECTIVE THERMAL CONDUCTIVITY OF VAPOR CHAMBER | Jung-Chang Wang ; Wang, R. T. | Experimental Techniques | 50 | |
36 | 2011 | Experimental Analysis for Thermal Performance of a Vapor Chamber Applied to High-Performance Servers | Rong-Tsu Wang; Jung-Chang Wang ; Tien-Li Chang | Journal of Marine Science and Technology-Taiwan | ||
37 | 2011 | Applied Vapor Chambers on Non-Uniform Thermo Physical Conditions | Jung-Chang Wang | Applied Physics | 0 | |
38 | 2011 | Investigations on Non-Condensation Gas of a Heat Pipe | Jung-Chang Wang | Engineering | 0 | |
39 | 2011 | Analysis for diving regulator applying local heating mechanism of vapor chamber in insert molding process | Jung-Chang Wang ; Ai-Tsung Li; Yu-Pin Tsai; Ray-Quen Hsu | International Communications in Heat and Mass Transfer | 9 | |
40 | 2011 | Analysis for Diving Regulator of Manufacturing Process | Jung-Chang Wang ; Yu Pin Tsai | Advanced Materials Research | ||
41 | 2011 | L-type heat pipes application in electronic cooling system | Jung-Chang Wang | International Journal of Thermal Sciences | 26 | |
42 | 2011 | THE EFFECT OF VAPOR CHAMBER IN AN INJECTION MOLDING PROCESS ON PART TENSILE STRENGTH | Tsai, Y. P.; Jung-Chang Wang ; Hsu, R. Q. | Experimental Techniques | 11 | |
43 | 2011 | LED with Ocean Battery | Jung-Chang Wang | Advanced Materials Research | 0 | |
44 | 2011 | 雙風扇L型熱管熱沉散熱模組在不同風速下之熱性能探討 | 王榮昌 ; 陳韋睿 | 熱管理產業通訊 | ||
45 | 2011 | 高功率LED照明結合發電晶片之熱流系統模組 | 王榮昌 ; 黃駿凌 | 熱管理產業通訊 | ||
46 | 2010 | Development of 30 Watt high-power LEDs vapor chamber-based plate | Jung-Chang Wang ; Rong-Tsu Wang; Tien-Li Chang; Daw-Shang Hwang | International Journal of Heat and Mass Transfer | 80 | |
47 | 2010 | Air cooling for a large-scale motor | Chih-Chung Chang; Yu-Fu Kuo; Jung-Chang Wang ; Sih-Li Chen | Applied Thermal Engineering | 22 | |
48 | 2010 | Program for Rapid Computation of the Thermal Performance of a Heat Sink with Embedded Heat Pipes | Jung-Chang Wang ; Rong-Tsu Wang; Chih-Chung Chang; Chun-Ling Huang | Journal of the Chinese Society of Mechanical Engineers | ||
49 | 2010 | Development of vapour chamber-based VGA thermal module | Jung-Chang Wang | International Journal of Numerical Methods for Heat & Fluid Flow | 18 | |
50 | 2010 | 微均溫板應用在LED之分析方法 | 王榮昌 ; 黃國榮; 黃駿凌 | 熱管理產業通訊 | ||
51 | 2010 | 奈米流體於LED微均溫板之熱傳特性研究 | 陳登傑; 王榮昌 ; 林成原 | 熱管理產業通訊 | ||
52 | 2010 | 微均熱板應用於高效能的伺服器系統 | 王榮昌 ; 陳登傑 | 熱管理產業通訊 | ||
53 | 2009 | Superposition method to investigate the thermal performance of heat sink with embedded heat pipes | Jung-Chang Wang | International Communications in Heat and Mass Transfer | 27 | |
54 | 2009 | 鋰電池/BMS產業價值鏈暨專利分析 | 郭怡君; 羅民芳; 簡牧菁; 王榮昌 ; 王榮祖 | 國立臺灣海洋大學海運學報 | ||
55 | 2009 | 應用發光二極體於節能燈具的探討 | 王榮昌 | 燃燒季刊(Combustion Quarterly) | ||
56 | 2009 | Vapor Chamber in Injection Molding Process | Y.-P. Tsai; Jung-Chang Wang | International Review of Chemical Engineering (Rapid Communications) | ||
57 | 2008 | Heat pipe for cooling of electronic equipment | Yu-Wei Chang ; Chiao-Hung Cheng; Jung-Chang Wang ; Sih-Li Chen | Energy Conversion and Management | 82 | |
58 | 2008 | A non-fluorine mold release agent for Ni stamp in nanoimprint process | Tien-Li Chang; Jung-Chang Wang ; Chun-Chi Chen; Ya-Wei Lee; Ta-Hsin Chou | Microelectronic Engineering | 9 | |
59 | 2008 | Novel Thermal Resistance Network Analysis of Heat Sink with Embedded Heat Pipes | Jung-Chang Wang | Jordan Journal of Mechanical and Industrial Engineering | ||
60 | 2008 | 均熱板散熱模組最佳性能設計 | 王榮昌 | 熱管理產業通訊 | ||
61 | 2007 | Experimental investigations of thermal resistance of a heat sink with horizontal embedded heat pipes | Jung-Chang Wang ; Hsiang-Sheng Huang; Sih-Li Chen | International Communications in Heat and Mass Transfer | 37 | |
62 | 2005 | Charge and discharge characteristics of a thermal energy storage device | Jung-Chang Wang ; Shu-Ju Lin; Sih-Li Chen; Wen-Shing Lee | Experimental Heat Transfer | 14 |