| 公開日期 | 標題 | 作者 | 來源出版物 | WOS | 全文 |
| 2015 | 3-D Experimental Model Analysis of Heat Pipes Thermal Modules | R.-T. Wang; Jung-Chang Wang | | | |
| 2012 | 3-D numerical and experimental models for flat and embedded heat pipes applied in high-end VGA card cooling system | Jung-Chang Wang | International Communications in Heat and Mass Transfer | 10 | |
| 2013 | 300W_LED燈具鰭片之最佳化設計與實驗 | 劉冠慶; 劉國辰; 王榮昌 | 熱管理產業通訊 | | |
| 2023 | Acoustic Field Radiation Prediction and Verification of Underwater Vehicles under a Free Surface | Chen, Yung-Wei ; Pan, Cheng-Cheng; Lin, Yi-Hsien; Shih, Chao-Feng; Shen, Jian-Hong; Chang, Chun-Ming | JOURNAL OF MARINE SCIENCE AND ENGINEERING | | |
| 2021 | Actuator Saturated Fuzzy Controller Design for Interval Type-2 Takagi-Sugeno Fuzzy Models with Multiplicative Noises | Chang, Wen-Jer ; Lin, Yu-Wei; Lin, Yann-Horng; Pen, Chin-Lin; Tsai, Ming-Hsuan | PROCESSES | 12 | |
| 2013 | Actuator Saturation Constrained Fuzzy Control for Discrete Stochastic Fuzzy Systems with Multiplicative Noises | Cheung-Chieh Ku ; Liang, H. J.; Wen-Jer Chang | Mathematical Problems in Engineering | | |
| 2001 | Adsorption of chlorine on the Si(001)-2 x 1 surface | Pi, T. W.; Shun-Feng Tsai ; Ouyang, C. P.; Wen, J. F.; Wu, R. T. | Surface Science | | |
| 2010 | Air cooling for a large-scale motor | Chih-Chung Chang; Yu-Fu Kuo; Jung-Chang Wang ; Sih-Li Chen | Applied Thermal Engineering | 22 | |
| 2017 | Alternative fuel for sustainable shipping across the Taiwan Strait | Hua, Jian ; Wu, Yihusan; Chen, HsinLing | TRANSPORT RES D-TR E | 22 | |
| 2016 | ALUMINA NANOFLUIDS AS ELECTROLYTES COMPARISONS TO VARIOUS NEUTRAL AQUEOUS SOLUTIONS INSIDE BATTERY | Wang, R. -T.; Wang, J. -C. | J MECH | 5 | |
| 1995 | An Experimental Study of Diluent Effects on Spray Flame Characteristics | Cherng–Yuan Lin | | | |
| 2003 | An Oxygenating Additive for Improving the Performance and Emission Characteristics of Marine Diesel Engine | Cherng-Yuan Lin ; Jyh-Cherng Huang | | | |
| 2008 | Analysis and synthesis of discrete nonlinear passive systems via affine T-S fuzzy models | Cheung-Chieh Ku ; Chang, W.; Wen-Jer Chang | International Journal of Systems Science | | |
| 2011 | Analysis for diving regulator applying local heating mechanism of vapor chamber in insert molding process | Jung-Chang Wang ; Ai-Tsung Li; Yu-Pin Tsai; Ray-Quen Hsu | International Communications in Heat and Mass Transfer | 9 | |
| 2011 | Analysis for Diving Regulator of Manufacturing Process | Jung-Chang Wang ; Yu Pin Tsai | Advanced Materials Research | | |
| 2008 | Analysis of 3D rolling forming with generalized rigid-plastic boundaries approach | Jang-Ping Wang ; Kao, W. C.; Lee, H. D.; Wang, J. | Journal of Materials Processing Technology | 3 | |
| 2011 | Analysis of suspension and heat transfer characteristics of Al2O3 nanofluids prepared through ultrasonic vibration | Cherng-Yuan Lin ; Jung-Chang Wang ; Teng-Chieh Chen | Applied Energy | 78 | |
| 2017 | Analysis of thermal conductivity in HI-LEDs lighting materials | Rong-Tsu Wang; Jung-Chang Wang | Journal of Mechanical Science and Technology | 4 | |
| 2014 | Analysis of thermal damage to laser irradiated tissue based on the dual-phase-lag model | Kuo-Chi Liu; Jung-Chang Wang | International Journal of Heat and Mass Transfer | 65 | |
| 2012 | Analyzing the pressure-difference phenomenon between the condensing and boiling sections in a heat pipe cooling system | Rong-Tsu Wang; Jung-Chang Wang | International Communications in Heat and Mass Transfer | 8 | |
