http://scholars.ntou.edu.tw/handle/123456789/4697
標題: | The influence of porosity on the fatigue crack growth behavior of Ti-6Al-4V laser welds | 作者: | L. W. Tsay Y.-P. Shan Y.-H. Chao W. Y. Shu |
關鍵字: | Welding;Weld Metal;Fatigue Crack Growth;Fusion Zone;Base Plate | 公開日期: | 十一月-2006 | 卷: | 41 | 期: | 22 | 起(迄)頁: | 7498–7505 | 來源出版物: | Journal of Materials Science | 摘要: | The effect of porosity––a common welding defect––on the fatigue crack growth rate (FCGR) in Ti–6Al–4V laser welds was investigated. The experimental results reveal that porosity was present in partial penetration welds over a narrow fusion zone (FZ) with martensite structure. The FCGR of the FZ was lower than that of the base plate. The fracture surface morphology of weld metal was much rougher as compared to that of the base plate. Randomly oriented martensite in the FZ led to local cleavage fracture along a preferred plane, thus, altering the crack growth direction significantly out of the primary crack plane. The zigzag crack path in the FZ resulted in a reduced FCGR at a given ΔK compared to the base plate. Besides, the porous weld showed a serration on the crack growth curve, and behaved the similar crack growth characteristics as the defect free one. SEM fractography revealed that the deflection of crack path around porosity together with local notch blunting as the crack tip pierced into porosity, balanced the increased FCGR for the occurrence of instant crack advance as the crack front reached the porosity at a low stress ratio. In contrast, the serration and drop in FCGR occurred sparingly at a high stress ratio as the crack front met the porosity. |
URI: | http://scholars.ntou.edu.tw/handle/123456789/4697 | ISSN: | 0022-2461 | DOI: | 10.1007/s10853-006-0833-x |
顯示於: | 光電與材料科技學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。