http://scholars.ntou.edu.tw/handle/123456789/1884
Title: | Fabrication and corrosion behavior of Ti-based bulk metallic glass composites containing carbon nanotubes | Authors: | Chih-Feng Hsu Hong-Ming Lin Chung-Kwei Lin Pee-Yew Lee Wu Kai |
Keywords: | Mechanical alloying;Bulk metallic glass composite;Supercooled liquid region;Vacuum hot pressing;Corrosion resistance | Issue Date: | Aug-2010 | Journal Volume: | 504 | Start page/Pages: | S176-S179 | Source: | Journal of Alloys and Compounds | Abstract: | This study explored the feasibility of preparing Ti50Cu28Ni15Sn7 bulk metallic glass composite with powder metallurgy. With high energy ball milling of a pure Ti, Cu, Ni, Sn and carbon nanotube (CNT) powder mixture, the CNT/Ti50Cu28Ni15Sn7 metallic glass composite powders can be formed with mechanical alloying (MA) after 8 h milling. The bulk metallic glass composite was successfully prepared by vacuum hot pressing the as-milled CNT/Ti50Cu28Ni15Sn7 metallic glass composite powders. The corrosion behavior of the Ti50Cu28Ni15Sn7 bulk metallic glass as well as composites modified by the addition of CNT was investigated by electrochemical measurements. Electrochemical characterization was performed in Hanks’ solution at 37 °C with physiologically relevant dissolved oxygen content. The results of potentiodynamic polarization measurements revealed that the Ti-based bulk metallic glass composites examined showed spontaneous passivity by anodic polarization with a passive current density of about 10−5 A/cm2. The higher corrosion resistance of the Ti-based bulk metallic glass composites was attributed to stable and protective passive films enriched with titanium containing certain amounts of additional elements. |
URI: | http://scholars.ntou.edu.tw/handle/123456789/1884 | ISSN: | 0925-8388 | DOI: | 10.1016/j.jallcom.2010.02.061 |
Appears in Collections: | 光電與材料科技學系 |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.