| Issue Date | Title | Author(s) | Source | WOS | Fulltext/Archive link |
| 2002 | A new approach to the effect of EP additive and surface roughness on the pitting fatigue of a line-contact system | Chau-Chang Chou ; Lin, J. F. | Journal of Tribology-Transactions of the Asme | | |
| 2008 | Absolute stability analysis for a class of Takagi-Sugeno fuzzy control systems | Chyun-Chau Fuh | International Journal of Systems Science | | |
| 2015 | Acousto-optic coupling in phoxonic crystal nanobeam cavities with plasmonic behavior | Hsu, J. C.; Lu, T. Y.; Tzy-Rong Lin | Optics Express | 14 | |
| 1996 | Active flutter control of a cantilever tube conveying fluid using piezoelectric actuators | Yih-Hwang Lin ; Chu, C. L. | Journal of Sound and Vibration | 27 | |
| 2004 | Active modal control of a flexible rotor | Yih-Hwang Lin ; Yu, H. C. | Mechanical Systems and Signal Processing | 7 | |
| 2001 | Active modal control of Timoshenko pipes conveying fluid | Yih-Hwang Lin ; Chu, C. L. | Journal of the Chinese Institute of Engineers | 7 | |
| 2006 | Active vibration control of a flexible beam mounted on an elastic base | Chu, C. L.; Wu, B. S.; Yih-Hwang Lin | Finite Elements in Analysis and Design | 6 | |
| 1997 | Adaptive modal vibration control of a fluid-conveying cantilever pipe | Tsai, Y. K.; Yih-Hwang Lin | Journal of Fluids and Structures | 23 | |
| 2013 | Adaptive multipath mitigation tracking system for GPS receiver | Mao, W. L.; Du, J. S.; Jyh-Jong Sheen ; Hwang, C. S. | Aerospace Science and Technology | | |
| 2007 | Adaptive parameter identification of servo control systems with noise and high-frequency uncertainties | Chyun-Chau Fuh ; Tsai, H. H. | Mechanical Systems and Signal Processing | | |
| 2013 | Adaptive Visual Servoing of Micro Aerial Vehicle with Switched System Model for Obstacle Avoidance | Cheng-Ming Huang; Ming-Li Chiang ; Li-Chen Fu | | 0 | |
| 2008 | Aerodynamic characteristics and thermal structure of nonpremixed reacting swirling wakes at low Reynolds numbers | Huang, R. F.; Shun-Chang Yen | Combustion and Flame | 19 | |
| 2011 | AERODYNAMIC PERFORMANCE AND SHEDDING CHARACTERISTICS ON A SWEPT-BACK WING | Shun-Chang Yen | Journal of Marine Science and Technology-Taiwan | | |
| 2007 | Amendment of cavity perturbation technique for loss tangent measurement at microwave frequencies | Jyh-Jong Sheen | Journal of Applied Physics | | |
| 2009 | Amorphous phase formation in intermetallic Mg2Ni alloy synthesized by ethanol wet milling | Wang, H. W.; Chyou, S. D.; Shing-Hoa Wang ; Yang, M. W.; Hsu, C. Y.; Hwa-Chong Tien ; Nan-Nong Huang | Journal of Alloys and Compounds | | |
| 2021 | Analysis and Experimental Verification of Mechanical Errors in Nine-Link Type Double-Toggle Mold/Die Clamping Mechanisms | Chang, Wen-Tung ; Lee, Wei-, I; Hsu, Kuan-Lun | APPLIED SCIENCES-BASEL | 4 | |
| 2011 | Analysis of the paracrine loop between cancer cells and fibroblasts using a microfluidic chip | Hsu, T. H.; Xiao, J. L.; Tsao, Y. W.; Kao, Y. L.; Shih-Hao Huang ; Liao, W. Y.; Lee, C. H. | Lab on a Chip | 40 | |
| 2010 | Application of the endochronic theory of plasticity for life prediction with asymmetric axial cyclic straining of AISI 304 stainless steel | Yi-Ming Jen ; Chiou, Y. C. | International Journal of Fatigue | | |
| 2013 | Application of the inclined exposure and molding process to fabricate a micro beam-splitter with nanometer roughness | Chuang, Y. J.; Shih-Hao Huang ; Chen, Y. C.; Hung, K. Y. | Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems | 2 | |
| 1999 | Application of the response surface method to the tribological analysis of a medium-carbon steel under mild-oxidational wear | Chau-Chang Chou ; Lin, J. F. | Journal of Tribology-Transactions of the Asme | | |
