| 公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
| 2021 | Temperature-Dependent Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Tensile Quasi-Static and Fatigue Properties of Epoxy Nanocomposites | Jen, Yi-Ming ; Chang, Hao-Huai; Lu, Chien-Min; Liang, Shin-Yu | POLYMERS | | 16 | |
| 2004 | Tensile properties of gas tungsten arc weldments in commercially pure titanium, Ti-6Al-4V and Ti-15V-3Al-3Sn-3Cr alloys at different strain rates | Shing-Hoa Wang ; Wei, M. D. | Science and Technology of Welding and Joining | | 19 | |
| 2003 | Tensile properties of LBW welds in Ti-6Al-4V alloy at evaluated temperatures below 450 degrees C | S.H Wang; M.D Wei; L.W Tsay | Materials Letters | | 96 | |
| 2001 | The effects of strain hardened layer on pitting formation during rolling contact | Chue, C. H.; Chung, H. H.; Lin, J. F.; Chau-Chang Chou | Wear | | | |
| 2002 | The response surface method and the analysis of mild oxidational wear | Lin, J. F.; Chau-Chang Chou | Tribology International | | | |
| 2022 | Theoretical analysis by Mindlin theory and experimental measurements of the piezoceramic circular bimorphs in resonance | Huang, Yu-Hsi; Lin, Yu-Chih ; Huang, Chi-Hung; Li, Cheng-Chi; Ma, Chien-Ching | INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | | 2 | |
| 2020 | Theoretical and numerical investigations on resonant characteristics of two piezoelectric plates coupled with a finite fluid field | Huang, Y. H.; Yu-Chih Lin ; Liao, C. Y.; Jhuang, K. L. | Archive of Applied Mechanics | | | |
| 2014 | THEORETICAL DESIGN STUDY ON SHAFTING ALIGNMENT CALCULATION FOR HIGH SPEED CRAFT | Chang, M. H.; Shuei-Wan Juang | Brodogradnja | | | |
| 2009 | Theory of plasmonic Fabry-Perot nanolasers | Chang, S. W.; Tzy-Rong Lin ; Chuang, S. L. | Optics Express | | 75 | |
| 2015 | Thermal characteristics and exhaust-gas analysis behind bluff-body frustums | Shun-Chang Yen ; Huang, Y. Z.; San, K. C. | Fuel | | 3 | |
| 2019 | Thermal cycling induced stress-assisted sigma phase formation in super duplex stainless steel | Li, J. S.; Cheng, G. J.; Yen, H. W.; Wu, L. T.; Yang, Y. L.; Wu, R. T.; Yang, J. R.; Shing-Hoa Wang | Materials & Design | | 6 | |
| 2019 | Thermal effects on dynamic instability of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Wen-Hsueh Kung | | | | |
| 2013 | Thermal stability of CrTaN hard coatings prepared using biased direct current sputter deposition | Lin, K. Y.; Chau-Chang Chou ; Yung-I Chen | Thin Solid Films | | 8 | |
| 2022 | Thermomechanical Property Measurement of Flexible Transparent Conductive-Film Substrates Based on Whole Folding Test by Reflective- Type Common-Path Liquid-Crystal Modulating Interferometry | Wen, Bor-Jiunn ; Hsu, Jui-Jen | IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT | | 0 | |
| 1997 | Thermoviscoelastic response of fiber-reinforced-plastic laminates with initial deflection imperfection | Nan-Nong Huang | Journal of Thermal Stresses | | | |
| 2021 | Thin layer electrolyte impregnation into porous anode-supported fuel cell by ultrasonic spray pyrolysis | Ko, Fu-Yin; Chiu, Te-Wei; Wu, Rudder T.; Chen, Tai-Cheng; Wang, Shing-Hoa ; Chang, Horng-Yi | INT J HYDROGEN ENERG | | 3 | |
| 2025/4/30 | Three-Dimensional Defect Measurement and Analysis of Wind Turbine Blades Using Unmanned Aerial Vehicles | Hung, Chin-Yuan; Chu, Huai-Yu; Wang, Yao-Ming; Wen, Bor-Jiunn | DRONES | | | |
| 2010 | Time-averaged topological flow patterns and their influence on vortex shedding of a square cylinder in crossflow at incidence | Huang, R. F.; Lin, B. H.; Shun-Chang Yen | Journal of Fluids and Structures | | 47 | |
| 2013 | Tolerance analysis and synthesis of cam-modulated linkages | Wen-Tung Chang ; Wu, L. I. | Mathematical and Computer Modelling | | | |
| 2024/7/1 | Toward Improved Load Forecasting in Smart Grids: A Robust Deep Ensemble Learning Framework | Su, Heng-Yi ; Lai, Chia-Ching | IEEE TRANSACTIONS ON SMART GRID | | | |
