| 公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
| 2019 | Vibration and stability of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Wen-Hsueh Kung; Jun-Kai Chen | | | | |
| 2022 | Vibration characteristics of hybrid functionally graded porous plates | Jihng-Kuo Ho ; Yi-Feng Huang; Yu-Chin Chiang; Chun-Sheng Chen | | | | |
| 1998 | Viscoelastic analysis of creep response for uniaxially-compressed laminates with initial deflection including the effect of physical aging | Nan-Nong Huang | International Journal of Solids and Structures | | | |
| 1997 | Viscoelastic analysis of von Karman laminated plates under in-plane compression with initial deflection | Nan-Nong Huang | International Journal of Non-Linear Mechanics | | | |
| 2014 | A vision-aided automation system for destructive web thickness measurement of microdrills | Wen-Tung Chang ; Chuang, S. F.; Tsai, Y. S.; Tang, G. R.; Shiou, F. J. | International Journal of Advanced Manufacturing Technology | | | |
| 2011 | Wake flow behind two side-by-side square cylinders | Shun-Chang Yen ; Liu, J. H. | International Journal of Heat and Fluid Flow | | | |
| 2011 | Wear behavior of Er-bearing Cu-based amorphous/crystal BMG composite under oil lubrication | Chau-Chang Chou ; Chung, H. H.; Liaw, P. K.; Liou, Y.; Huang, J. C.; Hsu, Y. Y.; Shing-Hoa Wang | Intermetallics | | 11 | |
| 2016 | Wear behavior of thermally sprayed Zn/15Al, Al and Inconel 625 coatings on carbon steel | Tai-Cheng Chen; Chau-Chang Chou ; Tung-Yuan Yung; Kun-Chao Tsai; Jiunn-Yuan Huang | Surface & Coatings Technology | | 26 | |
| 2020 | Wear Properties of Sc-Bearing Zr-Based Composite BMG with Nano-CuZr(2)under Lubrication | Shing-Hoa Wang ; Chung, H. H.; Hsu, C. A.; Liaw, P. K.; Chau-Chang Chou ; Rong-Tan Huang ; Horng-Yi Chang | Applied Sciences-Basel | | | |
| 2010 | Weld metal phase transformation of as welded 6Mo superaustenitic stainless steel after cross-weld fatigue | Wu, C. C.; Chen, C. Y.; Shing-Hoa Wang ; Yang, J. R.; Fang, J. | Science and Technology of Welding and Joining | | 0 | |
| 2022 | Welded microstructure and orientation variation of duplex Ti alloy through electrodynamic vibration | Liu, Chia-Heng; Kuo, Chen-Kuan; Wang, Shing-Hoa ; Yang, Yo-Lun; Chang, Horng-Yi ; Chiu, Po -Kai | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | | 0 | |
| 2017 | Wind farm characteristics of side-by-side and tandem configurations | Yen, Shun-Chang ; Huang, Jiang-Xun; San, Kuo-Ching | OCEAN ENG | | 1 | |
| 2011 | Winglet Dihedral Effect on Flow Behavior and Aerodynamic Performance of NACA0012 Wings | Shun-Chang Yen ; Fei, Y. F. | Journal of Fluids Engineering-Transactions of the Asme | | | |
| 2020 | 人工膝關節與膝內半月板模型建構 | 何靖國 ; 區文安; 黃祥順; 邱士育; 張宗鈺 | | | | |
| 2004 | 人機介面監控之防止海生物成長系統之開發 | 莊水旺 ; 潘榮進 | | | | |
| 2004 | 以TRIZ方法開發新型漁艙口蓋之研究 | 莊水旺 ; 蔡恒光 | | | | |
| 2019 | 化學鍍Ni-P薄膜微結構及提升黃銅基材疲勞壽命之研究 | 何靖國 ; 陳建勛; 黃國志; 鄭暐霖; 曾俊賢; 杜世綱; 許春耀 | | | | |
| 2019 | 射出成型件縫合線強度之探討 | 陳俊生; 何靖國 ; 嚴崇甡; 郭兆祥; 許春耀 | | | | |
| 2019 | 射出成形於非球面透鏡之殘留應力模擬分析研究 | 陳炤彰; 莊程媐 ; 郭柏陞; 李宥增 | | | | |
| 2001 | 小型船用柴油機排氣流量與溫度之理論預測 | 蕭志豪; 葉榮華; 廖世平 | | | | |
