| Issue Date | Title | Author(s) | Source | scopus | WOS | Fulltext/Archive link |
| 2013 | Suppression of Hunting in an ILPMSM Driver System Using Hunting Compensator | Yao, W. H.; Tung, P. C.; Chyun-Chau Fuh ; Chou, F. C. | Ieee Transactions on Industrial Electronics | | | |
| 2018 | Surface plasmon polariton nanolasers: Coherent light sources for new applications | Chou, Yu-Hsun; Chang, Chia-Jui; Lin, Tzy-Rong ; Lu, Tien-Chang | CHINESE PHYS B | | 7 | |
| 2017 | Surface Properties of Nano-Film Type Patterning Electrode on Flexible Substrate for Bending Test | Bor-Jiunn Wen ; Lee, C. C.; Chang, M. W.; Lin, H. K.; Liou, Y. Y.; Cheng, S. W. | Science of Advanced Materials | | 2 | |
| 2017 | Surface roughness effects on aluminium-based ultraviolet plasmonic nanolasers | Chung, Y. C.; Cheng, P. J.; Chou, Y. H.; Chou, B. T.; Hong, K. B.; Shih, J. H.; Lin, S. D.; Lu, T. C.; Tzy-Rong Lin | Scientific Reports | | 22 | |
| 2020 | Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Monotonic and Fatigue Properties of Uncracked and Cracked Epoxy Composites | Jen, Yi-Ming ; Huang, Jui-Cheng; Zheng, Kun-Yang | POLYMERS-BASEL | | 17 | |
| 2019 | Synergistic Effect on the Thermomechanical and Electrical Properties of Epoxy Composites with the Enhancement of Carbon Nanotubes and Graphene Nano Platelets | Yi-Ming Jen ; Huang, J. C. | Materials | | | |
| 2008 | Synthesis of bio-functionalized copolymer particles bearing carboxyl groups via a microfluidic device | Shih-Hao Huang ; Khoo, H. S.; ChangChien, S. Y.; Tseng, F. G. | Microfluidics and Nanofluidics | | 8 | |
| 2012 | TECHNOLOGY FORECASTING VIA PUBLISHED PATENT APPLICATIONS AND PATENT GRANTS | Chen, D. Z.; Chang-Pin Lin ; Huang, M. H.; Chan, Y. T. | Journal of Marine Science and Technology-Taiwan | | | |
| 2013 | Temperature-dependent monotonic and fatigue bending strengths of adhesively bonded aluminum honeycomb sandwich beams | Yi-Ming Jen ; Lin, H. B. | Materials & Design | | | |
| 2021 | Temperature-Dependent Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Tensile Quasi-Static and Fatigue Properties of Epoxy Nanocomposites | Jen, Yi-Ming ; Chang, Hao-Huai; Lu, Chien-Min; Liang, Shin-Yu | POLYMERS | | 16 | |
| 2004 | Tensile properties of gas tungsten arc weldments in commercially pure titanium, Ti-6Al-4V and Ti-15V-3Al-3Sn-3Cr alloys at different strain rates | Shing-Hoa Wang ; Wei, M. D. | Science and Technology of Welding and Joining | | 19 | |
| 2003 | Tensile properties of LBW welds in Ti-6Al-4V alloy at evaluated temperatures below 450 degrees C | S.H Wang; M.D Wei; L.W Tsay | Materials Letters | | 96 | |
| 2001 | The effects of strain hardened layer on pitting formation during rolling contact | Chue, C. H.; Chung, H. H.; Lin, J. F.; Chau-Chang Chou | Wear | | | |
| 2002 | The response surface method and the analysis of mild oxidational wear | Lin, J. F.; Chau-Chang Chou | Tribology International | | | |
| 2022 | Theoretical analysis by Mindlin theory and experimental measurements of the piezoceramic circular bimorphs in resonance | Huang, Yu-Hsi; Lin, Yu-Chih ; Huang, Chi-Hung; Li, Cheng-Chi; Ma, Chien-Ching | INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | | 2 | |
| 2020 | Theoretical and numerical investigations on resonant characteristics of two piezoelectric plates coupled with a finite fluid field | Huang, Y. H.; Yu-Chih Lin ; Liao, C. Y.; Jhuang, K. L. | Archive of Applied Mechanics | | | |
| 2014 | THEORETICAL DESIGN STUDY ON SHAFTING ALIGNMENT CALCULATION FOR HIGH SPEED CRAFT | Chang, M. H.; Shuei-Wan Juang | Brodogradnja | | | |
| 2009 | Theory of plasmonic Fabry-Perot nanolasers | Chang, S. W.; Tzy-Rong Lin ; Chuang, S. L. | Optics Express | | 75 | |
| 2015 | Thermal characteristics and exhaust-gas analysis behind bluff-body frustums | Shun-Chang Yen ; Huang, Y. Z.; San, K. C. | Fuel | | 3 | |
| 2019 | Thermal cycling induced stress-assisted sigma phase formation in super duplex stainless steel | Li, J. S.; Cheng, G. J.; Yen, H. W.; Wu, L. T.; Yang, Y. L.; Wu, R. T.; Yang, J. R.; Shing-Hoa Wang | Materials & Design | | 6 | |
