| Issue Date | Title | Author(s) | Source | scopus | WOS | Fulltext/Archive link |
| 2019 | Thermal effects on dynamic instability of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Wen-Hsueh Kung | | | | |
| 2013 | Thermal stability of CrTaN hard coatings prepared using biased direct current sputter deposition | Lin, K. Y.; Chau-Chang Chou ; Yung-I Chen | Thin Solid Films | | 8 | |
| 2022 | Thermomechanical Property Measurement of Flexible Transparent Conductive-Film Substrates Based on Whole Folding Test by Reflective- Type Common-Path Liquid-Crystal Modulating Interferometry | Wen, Bor-Jiunn ; Hsu, Jui-Jen | IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT | | 0 | |
| 1997 | Thermoviscoelastic response of fiber-reinforced-plastic laminates with initial deflection imperfection | Nan-Nong Huang | Journal of Thermal Stresses | | | |
| 2021 | Thin layer electrolyte impregnation into porous anode-supported fuel cell by ultrasonic spray pyrolysis | Ko, Fu-Yin; Chiu, Te-Wei; Wu, Rudder T.; Chen, Tai-Cheng; Wang, Shing-Hoa ; Chang, Horng-Yi | INT J HYDROGEN ENERG | | 3 | |
| 2025/4/30 | Three-Dimensional Defect Measurement and Analysis of Wind Turbine Blades Using Unmanned Aerial Vehicles | Hung, Chin-Yuan; Chu, Huai-Yu; Wang, Yao-Ming; Wen, Bor-Jiunn | DRONES | | | |
| 2010 | Time-averaged topological flow patterns and their influence on vortex shedding of a square cylinder in crossflow at incidence | Huang, R. F.; Lin, B. H.; Shun-Chang Yen | Journal of Fluids and Structures | | 47 | |
| 2013 | Tolerance analysis and synthesis of cam-modulated linkages | Wen-Tung Chang ; Wu, L. I. | Mathematical and Computer Modelling | | | |
| 2024/7/1 | Toward Improved Load Forecasting in Smart Grids: A Robust Deep Ensemble Learning Framework | Su, Heng-Yi ; Lai, Chia-Ching | IEEE TRANSACTIONS ON SMART GRID | | | |
| 2007 | Transient three-dimensional analysis of gas tungsten arc welding plates | Yeh, R. H.; Shih-Pin Liaw ; Tu, Y. P. | Numerical Heat Transfer Part a-Applications | | 13 | |
| 2020 | Tribological and mechanical properties of Cu/Ni-microdiamond bilayers on brass substrates coated by composite electrodeposition technology | Wang, X. L.; Chau-Chang Chou ; Yang, Y. C.; Wu, R.; Lee, J. W.; Horng-Yi Chang | Surface Topography-Metrology and Properties | | 6 | |
| 2008 | Tribological and mechanical properties of HFCVD diamond-coated WC-Co substrates with different Cr interlayers | Chau-Chang Chou ; Lee, J. W.; Chen, Y. I. | Surface & Coatings Technology | | | |
| 2015 | Tribological and oxidational properties of porous high-pressure crystallized and vitamin E-incorporated ultra-high-molecular weight polyethylene as an artificial cartilage | Chau-Chang Chou ; Wang, Y. Z.; You, J. H.; Wu, C. L. | Advances in Mechanical Engineering | | | |
| 2010 | Tribological behavior of nanodiamond-dispersed lubricants on carbon steels and aluminum alloy | Chau-Chang Chou ; Lee, S. H. | Wear | | | |
| 1997 | Tribological effects of roughness and running-in on oil-lubricated line contacts | Chau-Chang Chou ; Lin, J. F. | Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology | | | |
| 2010 | Tribological properties of Cr-Si-N nanocomposite film adherent silicon under various environments | Lin, H. H.; Chau-Chang Chou ; Lee, J. W. | Thin Solid Films | | | |
| 2012 | Twinned formation in weld metal of titanium bearing nano precipitated high strength steel | Hsu, P. W.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Wang, Y. M.; Lin, Q. X.; Horng-Yi Chang | Materials Chemistry and Physics | | | |
| 2014 | Two-stage cumulative bending fatigue behavior for the adhesively bonded aluminum honeycomb sandwich panels | Yi-Ming Jen ; Teng, F. L.; Teng, T. C. | Materials & Design | | | |
| 2018 | Ultracompact Pseudowedge Plasmonic Lasers and Laser Arrays | Chou, Y. H.; Hong, K. B.; Chang, C. T.; Chang, T. C.; Huang, Z. T.; Cheng, P. J.; Yang, J. H.; Lin, M. H.; Tzy-Rong Lin ; Chen, K. P.; Gwo, S.; Lu, T. C. | Nano Letters | | 43 | |
| 2019 | Ultrasonic-Assisted Innovative Polyurethane Tool to Polish Mold Steel | Ming-Yi Tsai; Yue-Feng Lin; Jihng-Kuo Ho ; Jing-Guang Yang | IJAT | | 0 | |
