第 1 到 27 筆結果，共 27 筆。
| 公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
|---|---|---|---|---|---|---|---|
| 1 | 2024/3/23 | Effect of MoN on the structure and characteristics of MoN/ZrMoN bi-layer nitride films | Hu, Ding-Chiang; Kuo, Dong-Hau; Tsao, Chung-Chen; Ho, Jihng-Kuo ; Kuo, Chin-Guo; Hsu, Chun-Yao | BULLETIN OF MATERIALS SCIENCE | |||
| 2 | 2024 | 提升課堂學生的學習動機與學習成效具體作法-以非傳統加工為實踐課程 | 何靖國 |  | |||
| 3 | 2022 | Vibration characteristics of hybrid functionally graded porous plates | Jihng-Kuo Ho ; Yi-Feng Huang; Yu-Chin Chiang; Chun-Sheng Chen | ||||
| 4 | 2022 | Instability of hybrid functionally graded porous plate | Jihng-Kuo Ho ; Ching-Rung Chu; Wei-Zhou Jian; Chun-Sheng Chen | ||||
| 5 | 2020 | Grey-Taguchi-Based Optimization of Wire-Sawing for a Slicing Ceramic | Tsai, Yao-Yang; Ho, Jihng-Kuo ; Wang, Wen-Hao; Hsieh, Chia-Chin; Tsao, Chung-Chen; Hsu, Chun-Yao | Processes | |||
| 6 | 2020 | 散熱鰭片的模型建立與打樣技術 | 何靖國 ; 羅雲康; 邱士育; 黃祥順; 張宗鈺 | ||||
| 7 | 2020 | 人工膝關節與膝內半月板模型建構 | 何靖國 ; 區文安; 黃祥順; 邱士育; 張宗鈺 | ||||
| 8 | 2020 | Dynamic vibration of carbon nanotube-reinforced hybrid composite plates | Jihng-Kuo Ho ; Wen-Hua Lo; Yu-Chou Chengz; Chun-Sheng Chen | ||||
| 9 | 2019 | Dynamic characteristics of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Jun-Kai Chen | ||||
| 10 | 2019 | Vibration and stability of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Wen-Hsueh Kung; Jun-Kai Chen | ||||
| 11 | 2019 | Thermal effects on dynamic instability of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Wen-Hsueh Kung | ||||
| 12 | 2019 | 化學鍍Ni-P薄膜微結構及提升黃銅基材疲勞壽命之研究 | 何靖國 ; 陳建勛; 黃國志; 鄭暐霖; 曾俊賢; 杜世綱; 許春耀 | ||||
| 13 | 2019 | 微射出成型的製程參數對於含微流道生物晶片特性之影響 | 陳俊生; 何靖國 ; 陳健志 | ||||
| 14 | 2019 | 射出成型件縫合線強度之探討 | 陳俊生; 何靖國 ; 嚴崇甡; 郭兆祥; 許春耀 | ||||
| 15 | 2019 | Ultrasonic-Assisted Innovative Polyurethane Tool to Polish Mold Steel | Ming-Yi Tsai; Yue-Feng Lin; Jihng-Kuo Ho ; Jing-Guang Yang | IJAT | 0 | ||
| 16 | 2016 | The Machining of Hard Mold Steel by Ultrasonic Assisted End Milling | Tsai, Ming; Chang, Chia; Ho, Jihng | Applied Sciences | |||
| 17 | 2016 | Investigation of Polishing Pads Impregnated with Fe and Al2O3 Particles for Single-Crystal Silicon Carbide Wafers | Ho, Jihng-Kuo ; Huang, Chih-Yung; Tsai, Ming-Yi; Tsai, Che-Cheng | Applied Sciences | |||
| 18 | 2015 | Combined Diamond Disks in Chemical Mechanical Polishing | Ming Yi Tsai; Jihng Kuo Ho ; Jyu Lin Zeng | Key Engineering Materials | |||
| 19 | 2014 | Novel method to remove tall diamond grits and improve diamond disk performance | Ho, Jihng Kuo ; Tsai, Che Hsiung; Tsai, Ming Yi; Yeh, Tung Sheng | The International Journal of Advanced Manufacturing Technology | |||
| 20 | 2014 | Development of a novel cooling system-assisted minimum quantity lubrication method for improvement of milling performance | Ho, Jihng Kuo ; Tsai, Che Hsiung; Tsai, Ming Yi; Tu, Ming Xim; Sung, James C. | Journal of the Chinese Institute of Engineers | |||
| 21 | 2014 | Development of a Novel Nanodiamond-Impregnated Polishing Pad for Chemical Mechanical Polishing of Oxide Film | Jihng-Kuo Ho ; Che-Hsiung Tsai; Ming-Yi Tsai; Jui-Hsuan Chiang | 中國機械工程學刊 | |||
| 22 | 2012 | Impregnation of Hydrogenated Graphite in Polyurethane Pad for Improved Performance in Chemical-Mechanical Polishing Processes | Tsai, M. Y.; Ho, J. K. ; Tsai, C. H.; Chen, C. Y. | Advanced Science Letters | 0 | ||
| 23 | 2010 | Generation of Tool Paths and Five-axis B-spline Curve NC Commands for Centrifugal Impeller Machining | J.S. Tsai; J. K. Ho ; K. W. Liao; C.Y. Chiu | ||||
| 24 | 2010 | A Study of the Diamond Tools for Grinding Polycrystalline Diamond | S. Y. Luo; J.K. Ho ; M. Y. Tsai; Liu, W. Chen | Advanced Materials Research | |||
| 25 | 2008 | Prediction of cutting forces for face milling process and stresses estimation on cutting edge | C.R. Lin; J.S. Tsai; M.K. Dao; J. K. Ho ; C.K. Chang | ||||
| 26 | 2008 | 鑽石磨削工具製造與多晶鑽石加工之研究 | 何靖國 ; 羅勝益; 蔡哲雄 | ||||
| 27 | 2006 | 鑽石磨棒磨削多晶鑽石加工之研究 | 羅勝益; 何靖國 ; 余宗翰; 林信憲 |
