| 公開日期 | 標題 | 作者 | 來源出版物 | WOS | 全文 |
| 1 | 2022 | Effect of Dispersing Multiwalled Carbon Nanotubes and Graphene Nanoplatelets Hybrids in the Matrix on the Flexural Fatigue Properties of Carbon/Epoxy Composites | Jen, Yi-Ming ; Ni, Wei-Lun | POLYMERS | 1 | |
| 2 | 2021 | Improvement in Tensile Quasi-Static and Fatigue Properties of Carbon Fiber-Reinforced Epoxy Laminates with Matrices Modified by Carbon Nanotubes and Graphene Nanoplatelets Hybrid Nanofillers | Jen, Yi-Ming ; Huang, Yu-Ching | NANOMATERIALS | 5 | |
| 3 | 2021 | Temperature-Dependent Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Tensile Quasi-Static and Fatigue Properties of Epoxy Nanocomposites | Jen, Yi-Ming ; Chang, Hao-Huai; Lu, Chien-Min; Liang, Shin-Yu | POLYMERS | 16 | |
| 4 | 2020 | Insight on creep behavior for arrayed interphase nano-precipitation in Ti-Microalloyed HSLA steel | Yang, Y. L.; Lin, Q. X.; Chen, C. Y.; Shing-Hoa Wang ; Chen, H. R.; Tsai, B. S.; Liu, H. C.; Yi-Ming Jen | Materials Chemistry and Physics | | |
| 5 | 2020 | Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Monotonic and Fatigue Properties of Uncracked and Cracked Epoxy Composites | Jen, Yi-Ming ; Huang, Jui-Cheng; Zheng, Kun-Yang | POLYMERS-BASEL | 17 | |
| 6 | 2020 | Static bending strength assessment of sandwich panels with glass/polypropylene faces and aluminum foam cores | Jen, Yi-Ming ; Tang, Zih-He | MODERN PHYSICS LETTERS B | 3 | |
| 7 | 2020 | Static bending strength assessment of sandwich panels with glass/polypropylene faces and aluminum foam cores | Yi-Ming Jen ; Tang, Z. H. | Modern Physics Letters B | | |
| 8 | 2019 | Synergistic Effect on the Thermomechanical and Electrical Properties of Epoxy Composites with the Enhancement of Carbon Nanotubes and Graphene Nano Platelets | Yi-Ming Jen ; Huang, J. C. | Materials | | |
| 9 | 2018 | Combined Temperature and Moisture Effect on the Monotonic and Fatigue Strengths of Sandwich Beams with Glass-Polypropylene Faces and Aluminum Foam Cores | Yi-Ming Jen ; Chang, C. W. | Polymers & Polymer Composites | | |
| 10 | 2016 | INFLUENCE OF SHOT-PEENING -INDUCED RESIDUAL STRESSES ON POST-NECKING BEHAVIOR OF TEMPERED ULTRAHIGH-STRENGTH LOW ALLOY 300M STEEL | Shing-Hoa Wang ; Lin, Y. C.; Wu, B. F.; Hsu, H. C.; Yeh, J. J.; Yi-Ming Jen | Journal of Marine Science and Technology-Taiwan | | |
| 11 | 2014 | Effect of temperature on fatigue strength of carbon nanotube/epoxy composites | Yi-Ming Jen ; Huang, C. Y. | Journal of Composite Materials | | |
| 12 | 2014 | Two-stage cumulative bending fatigue behavior for the adhesively bonded aluminum honeycomb sandwich panels | Yi-Ming Jen ; Teng, F. L.; Teng, T. C. | Materials & Design | | |
| 13 | 2013 | Fatigue characterization of acid-treated carbon nanotube/epoxy composites | Yi-Ming Jen ; Huang, C. Y. | Journal of Composite Materials | | |
| 14 | 2013 | Temperature-dependent monotonic and fatigue bending strengths of adhesively bonded aluminum honeycomb sandwich beams | Yi-Ming Jen ; Lin, H. B. | Materials & Design | | |
| 15 | 2013 | COMBINED TEMPERATURE AND MOISTURE EFFECT ON THE STRENGTH OF CARBON NANOTUBE REINFORCED EPOXY MATERIALS | Yi-Ming Jen ; Huang, C. Y. | Transactions of the Canadian Society for Mechanical Engineering | | |
| 16 | 2012 | Stress concentration effect on the fatigue properties of carbon nanotube/epoxy composites | Yi-Ming Jen ; Wang, Y. C. | Composites Part B-Engineering | | |
| 17 | 2012 | Fatigue life evaluation of adhesively bonded scarf joints | Yi-Ming Jen | International Journal of Fatigue | | |
| 18 | 2011 | Finite element based fatigue life estimation of the solder joints with effect of intermetallic compound growth | Chiou, Y. C.; Yi-Ming Jen ; Huang, S. H. | Microelectronics Reliability | | |
| 19 | 2011 | Experimental investigation on the effect of tensile pre-strain on ratcheting behavior of 430 Stainless Steel under fully-reversed loading condition | Chiou, Y. C.; Wen-Kai Weng ; Yi-Ming Jen | Engineering Failure Analysis | | |
| 20 | 2011 | Fracture mechanics study on the intermetallic compound cracks for the solder joints of electronic packages | Yi-Ming Jen ; Chiou, Y. C.; Yu, C. L. | Engineering Failure Analysis | | |
| 21 | 2010 | Application of the endochronic theory of plasticity for life prediction with asymmetric axial cyclic straining of AISI 304 stainless steel | Yi-Ming Jen ; Chiou, Y. C. | International Journal of Fatigue | | |
| 22 | 2010 | Evaluation of fatigue life of adhesively bonded aluminum single-lap joints using interfacial parameters | Yi-Ming Jen ; Ko, C. W. | International Journal of Fatigue | | |
| 23 | 2009 | Effect of thickness of face sheet on the bending fatigue strength of aluminum honeycomb sandwich beams | Yi-Ming Jen ; Chang, L. Y. | Engineering Failure Analysis | | |
| 24 | 2009 | Effect of the amount of adhesive on the bending fatigue strength of adhesively bonded aluminum honeycomb sandwich beams | Yi-Ming Jen ; Ko, C. W.; Lin, H. B. | International Journal of Fatigue | | |
| 25 | 2008 | Evaluating bending fatigue strength of aluminum honeycomb sandwich beams using local parameters | Yi-Ming Jen ; Chang, L. Y. | International Journal of Fatigue | | |
| 26 | 2008 | Assessing the fatigue life of butt-welded joints under oblique loading by using local approaches | Yi-Ming Jen ; Chang, L. Y.; Fang, C. F. | International Journal of Fatigue | | |
| 27 | 2007 | Interfacial parameter analyses for sleeve-pin-shaft connections under axial and torsional cyclic loading using the finite element method | Yi-Ming Jen ; Wei, C. L. | Journal of Strain Analysis for Engineering Design | | |
| 28 | 2007 | Prediction of low-cycle contact fatigue life of sleeve-pin-shaft connections under axial and torsional cyclic loading | Yi-Ming Jen ; Yip, M. C.; Wei, C. L.; Shu, G. C. | International Journal of Fatigue | | |
| 29 | 2006 | Effect of size of lid-substrate adhesive on reliability of solder balls in thermally enhanced flip chip PBGA packages | Yi-Ming Jen ; Fang, C. K.; Yeh, Y. H. | Ieee Transactions on Components and Packaging Technologies | | |
| 30 | 2006 | Impact of the number of chips on the reliability of the solder balls for wire-bonded stacked-chip ball grid array packages | Yi-Ming Jen ; Wu, Y. L.; Fang, C. K. | Microelectronics Reliability | | |
| 31 | 2006 | Effect of lid materials on the solder ball reliability of thermally enhanced flip-chip plastic ball grid array packages | Yi-Ming Jen ; Chien, H. H.; Lin, T. S.; Huang, S. H. | Fracture and Strength of Solids Vi, Pts 1 and 2 | | |
| 32 | 2005 | Crack initiation life prediction for solid cylinders with transverse circular holes under in-phase and out-of-phase multiaxial loading | Yi-Ming Jen ; Wang, W. W. | International Journal of Fatigue | | |
| 33 | 1998 | Evaluation of cumulative fatigue lives under different biaxial loading mode sequences for notched specimens | Yip, M. C.; Yi-Ming Jen | Fracture and Strength of Solids, Pts 1 and 2: Pt 1: Fracture Mechanics of Materials; Pt 2: Behavior of Materials and Structure | | |
| 34 | 1997 | Mean strain effect on crack initiation lives for notched specimens under biaxial nonproportional loading paths | Yip, M. C.; Yi-Ming Jen | Journal of Engineering Materials and Technology-Transactions of the Asme | | |
| 35 | 1996 | Biaxial fatigue crack initiation life prediction of solid cylindrical specimens with transverse circular holes | Yip, M. C.; Yi-Ming Jen | International Journal of Fatigue | | |
| 36 | 1995 | NOTCH EFFECT ON 2-LEVEL CUMULATIVE LOW-CYCLE FATIGUE LIFE UNDER DIFFERENT BIAXIAL LOADING MODE SEQUENCES | Yip, M. C.; Yi-Ming Jen | Fatigue & Fracture of Engineering Materials & Structures | | |
