研究成果

第 1 到 36 筆結果，共 36 筆。

公開日期標題作者來源出版物WOS全文
12022Effect of Dispersing Multiwalled Carbon Nanotubes and Graphene Nanoplatelets Hybrids in the Matrix on the Flexural Fatigue Properties of Carbon/Epoxy CompositesJen, Yi-Ming ; Ni, Wei-LunPOLYMERS1
22021Improvement in Tensile Quasi-Static and Fatigue Properties of Carbon Fiber-Reinforced Epoxy Laminates with Matrices Modified by Carbon Nanotubes and Graphene Nanoplatelets Hybrid NanofillersJen, Yi-Ming ; Huang, Yu-ChingNANOMATERIALS5
32021Temperature-Dependent Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Tensile Quasi-Static and Fatigue Properties of Epoxy NanocompositesJen, Yi-Ming ; Chang, Hao-Huai; Lu, Chien-Min; Liang, Shin-YuPOLYMERS16
42020Insight on creep behavior for arrayed interphase nano-precipitation in Ti-Microalloyed HSLA steelYang, Y. L.; Lin, Q. X.; Chen, C. Y.; Shing-Hoa Wang ; Chen, H. R.; Tsai, B. S.; Liu, H. C.; Yi-Ming Jen Materials Chemistry and Physics
52020Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Monotonic and Fatigue Properties of Uncracked and Cracked Epoxy CompositesJen, Yi-Ming ; Huang, Jui-Cheng; Zheng, Kun-YangPOLYMERS-BASEL17
62020Static bending strength assessment of sandwich panels with glass/polypropylene faces and aluminum foam coresJen, Yi-Ming ; Tang, Zih-HeMODERN PHYSICS LETTERS B3
72020Static bending strength assessment of sandwich panels with glass/polypropylene faces and aluminum foam coresYi-Ming Jen ; Tang, Z. H.Modern Physics Letters B
82019Synergistic Effect on the Thermomechanical and Electrical Properties of Epoxy Composites with the Enhancement of Carbon Nanotubes and Graphene Nano PlateletsYi-Ming Jen ; Huang, J. C.Materials
92018Combined Temperature and Moisture Effect on the Monotonic and Fatigue Strengths of Sandwich Beams with Glass-Polypropylene Faces and Aluminum Foam CoresYi-Ming Jen ; Chang, C. W.Polymers & Polymer Composites
102016INFLUENCE OF SHOT-PEENING -INDUCED RESIDUAL STRESSES ON POST-NECKING BEHAVIOR OF TEMPERED ULTRAHIGH-STRENGTH LOW ALLOY 300M STEELShing-Hoa Wang ; Lin, Y. C.; Wu, B. F.; Hsu, H. C.; Yeh, J. J.; Yi-Ming Jen Journal of Marine Science and Technology-Taiwan
112014Effect of temperature on fatigue strength of carbon nanotube/epoxy compositesYi-Ming Jen ; Huang, C. Y.Journal of Composite Materials
122014Two-stage cumulative bending fatigue behavior for the adhesively bonded aluminum honeycomb sandwich panelsYi-Ming Jen ; Teng, F. L.; Teng, T. C.Materials & Design
132013Fatigue characterization of acid-treated carbon nanotube/epoxy compositesYi-Ming Jen ; Huang, C. Y.Journal of Composite Materials
142013Temperature-dependent monotonic and fatigue bending strengths of adhesively bonded aluminum honeycomb sandwich beamsYi-Ming Jen ; Lin, H. B.Materials & Design
152013COMBINED TEMPERATURE AND MOISTURE EFFECT ON THE STRENGTH OF CARBON NANOTUBE REINFORCED EPOXY MATERIALSYi-Ming Jen ; Huang, C. Y.Transactions of the Canadian Society for Mechanical Engineering
162012Stress concentration effect on the fatigue properties of carbon nanotube/epoxy compositesYi-Ming Jen ; Wang, Y. C.Composites Part B-Engineering
172012Fatigue life evaluation of adhesively bonded scarf jointsYi-Ming Jen International Journal of Fatigue
182011Finite element based fatigue life estimation of the solder joints with effect of intermetallic compound growthChiou, Y. C.; Yi-Ming Jen ; Huang, S. H.Microelectronics Reliability
192011Experimental investigation on the effect of tensile pre-strain on ratcheting behavior of 430 Stainless Steel under fully-reversed loading conditionChiou, Y. C.; Wen-Kai Weng ; Yi-Ming Jen Engineering Failure Analysis
202011Fracture mechanics study on the intermetallic compound cracks for the solder joints of electronic packagesYi-Ming Jen ; Chiou, Y. C.; Yu, C. L.Engineering Failure Analysis
212010Application of the endochronic theory of plasticity for life prediction with asymmetric axial cyclic straining of AISI 304 stainless steelYi-Ming Jen ; Chiou, Y. C.International Journal of Fatigue
222010Evaluation of fatigue life of adhesively bonded aluminum single-lap joints using interfacial parametersYi-Ming Jen ; Ko, C. W.International Journal of Fatigue
232009Effect of thickness of face sheet on the bending fatigue strength of aluminum honeycomb sandwich beamsYi-Ming Jen ; Chang, L. Y.Engineering Failure Analysis
242009Effect of the amount of adhesive on the bending fatigue strength of adhesively bonded aluminum honeycomb sandwich beamsYi-Ming Jen ; Ko, C. W.; Lin, H. B.International Journal of Fatigue
252008Evaluating bending fatigue strength of aluminum honeycomb sandwich beams using local parametersYi-Ming Jen ; Chang, L. Y.International Journal of Fatigue
262008Assessing the fatigue life of butt-welded joints under oblique loading by using local approachesYi-Ming Jen ; Chang, L. Y.; Fang, C. F.International Journal of Fatigue
272007Interfacial parameter analyses for sleeve-pin-shaft connections under axial and torsional cyclic loading using the finite element methodYi-Ming Jen ; Wei, C. L.Journal of Strain Analysis for Engineering Design
282007Prediction of low-cycle contact fatigue life of sleeve-pin-shaft connections under axial and torsional cyclic loadingYi-Ming Jen ; Yip, M. C.; Wei, C. L.; Shu, G. C.International Journal of Fatigue
292006Effect of size of lid-substrate adhesive on reliability of solder balls in thermally enhanced flip chip PBGA packagesYi-Ming Jen ; Fang, C. K.; Yeh, Y. H.Ieee Transactions on Components and Packaging Technologies
302006Impact of the number of chips on the reliability of the solder balls for wire-bonded stacked-chip ball grid array packagesYi-Ming Jen ; Wu, Y. L.; Fang, C. K.Microelectronics Reliability
312006Effect of lid materials on the solder ball reliability of thermally enhanced flip-chip plastic ball grid array packagesYi-Ming Jen ; Chien, H. H.; Lin, T. S.; Huang, S. H.Fracture and Strength of Solids Vi, Pts 1 and 2
322005Crack initiation life prediction for solid cylinders with transverse circular holes under in-phase and out-of-phase multiaxial loadingYi-Ming Jen ; Wang, W. W.International Journal of Fatigue
331998Evaluation of cumulative fatigue lives under different biaxial loading mode sequences for notched specimensYip, M. C.; Yi-Ming Jen Fracture and Strength of Solids, Pts 1 and 2: Pt 1: Fracture Mechanics of Materials; Pt 2: Behavior of Materials and Structure
341997Mean strain effect on crack initiation lives for notched specimens under biaxial nonproportional loading pathsYip, M. C.; Yi-Ming Jen Journal of Engineering Materials and Technology-Transactions of the Asme
351996Biaxial fatigue crack initiation life prediction of solid cylindrical specimens with transverse circular holesYip, M. C.; Yi-Ming Jen International Journal of Fatigue
361995NOTCH EFFECT ON 2-LEVEL CUMULATIVE LOW-CYCLE FATIGUE LIFE UNDER DIFFERENT BIAXIAL LOADING MODE SEQUENCESYip, M. C.; Yi-Ming Jen Fatigue & Fracture of Engineering Materials & Structures