| 公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
| 1 | 2007 | A comparison of hydrogen embrittlement susceptibility of two austenitic stainless steel welds | Tsay, L. W. ; Yu, S. C.; Chyou, San-Der; Lin, D.-Y. | Article | | 13 | |
| 2 | 2016 | Air Oxidation of a Ni53Nb20Ti10Zr8Co6Cu3 Glassy Alloy at 400–550 °C | Wu Kai ; Chen, Y. T.; Zheng, F. P.; Chen, W. S.; Rong-Tan Huang ; Leu-Wen Tsay ; Huang, H. H.; Zhang, W. | Oxidation of Metals | | 3 | |
| 3 | 2013 | Air-oxidation behavior of a [(Fe50Co50)(75)B20Si5](96)Nb-4 bulk metallic glass at 500-650 degrees C | Wu Kai ; Wu, Y. H.; Chen, W. S.; Tsay, L. W. ; Jia, H. L.; Liaw, P. K. | Corrosion Science | | | |
| 4 | 2017 | Air-oxidation of FeCoNiCr-based quinary high-entropy alloys at 700–900 °C | Wu Kai ; Li, C. C.; Cheng, F. P.; Chu, K. P.; Kai, J. J.; Rong-Tan Huang ; Leu-Wen Tsay | Corrosion Science | | 95 | |
| 5 | 2018 | The Application of 40Ti-35Ni-25Nb Filler Foil in Brazing Commercially Pure Titanium | Shan-Bo Wang; Chuan-Sheng Kao; Leu-Wen Tsay ; Ren-Kae Shiue | Metals | | 0 | |
| 6 | 1997 | Assisted crack growth in maraging steel welds by gaseous hydrogen | Leu-Wen Tsay ; Huang, Wenbo; Chen, C | | | | |
| 7 | 2019 | The Comparison of Cracking Susceptibility of IN52M and IN52MSS Overlay Welds | Min-Yi Chen; Tai-Jung Wu; Tai-Cheng Chen; Sheng-Long Jeng; Leu-Wen Tsay | Metals | | 2 | |
| 8 | 2018 | Correlation between Fatigue Crack Growth Behavior and Fracture Surface Roughness on Cold-Rolled Austenitic Stainless Steels in Gaseous Hydrogen | Tai-Cheng Chen; Sheng-Tsan Chen; Leu-Wen Tsay ; Ren-Kae Shiue | Metals | | | |
| 9 | 2024/5/1 | Corrosion Resistance of Fe-Based Amorphous Films Prepared by the Radio Frequency Magnetron Sputter Method | Lin, Tai-Nan; Liao, Pin-Hsun; Wang, Cheng-Chin; Lee, Hung-Bin ; Tsay, Leu-Wen | MATERIALS | | | |
| 10 | 1998 | Crack growth behaviour of heat-treated 4140 steel in air and gaseous hydrogen | Chuang, Jia-Hao; Leu-Wen Tsay ; Chen, C | Article | | | |
| 11 | 2017 | Creep Rupture of the Simulated HAZ of T92 Steel Compared to that of a T91 Steel | Yu-Quan Peng; Tai-Cheng Chen; Tien-Jung Chung; Sheng-Long Jeng; Rong-Tan Huang ; Leu-Wen Tsay | Materials | | 11 | |
| 12 | 2021 | Dissimilar Brazing of Ti-15Mo-5Zr-3Al and Commercially Pure Titanium Using Ti-Cu-Ni Foil<br> | Yue, Gui-Lin; Chen, Tai-Cheng; Shiue, Ren-Kae; Tsay, Leu-Wen | MATERIALS | | 2 | |
| 13 | 1995 | EFFECT OF AGING TREATMENT ON THE MICROSTRUCTURES AND PROPERTIES OF T-250 LASER WELDS | TSAY, LW ; CHEN, C; CHAN, SLI | | | | |
| 14 | 2007 | Effect of Austenite Instability on the Hydrogen-enhanced Crack Growth of Austenitic Stainless Steels | L.W. Tsay ; S.C. Yu; R.-T. Huang | | | 32 | |
| 15 | 2008 | The effect of grain size and aging on hydrogen embrittlement of a maraging steel | L. W. Tsay, ; H. L. Lu,; C. Chen | | | | |
| 16 | 2021 | The Effect of Heat Treatment on the Corrosion Resistance of Fe-Based Amorphous Alloy Coating Prepared by High Velocity Oxygen Fuel Method | Lee, Chun-Ying; Sheu, Hung-Hua; Leu-Wen Tsay ; Hsiao, Po-Sen; Lin, Tzu-Jing; Hung-Bin Lee | | | | |
| 17 | 2011 | Effect of hydride orientation on fracture toughness of Zircaloy-4 cladding | Hsiao-Hung Hsu; Leu-Wen Tsay | Journal of Nuclear Materials | | 31 | |
| 18 | 2002 | Effect of hydrogen environment on the notched tensile properties of T-250 maraging steel annealed by laser treatment | L. W Tsay ; W. C Lee; W. C Luu; J. K Wu | | | | |
| 19 | 1998 | Effect of laser beam radiation on fatigue crack propagation in AISI 4150 steel | Leu-Wen Tsay ; Lin, Z. W. | | | 0 | |
| 20 | 2017 | Effect of Low-Temperature Sensitization on Hydrogen Embrittlement of 301 Stainless Steel | Chieh Yu; Ren-Kae Shiue; Chun Chen; Leu-Wen Tsay | Metals | | 4 | |
| 21 | 2021 | Effect of Micro-Shot Peening on the Fatigue Performance of AISI 304 Stainless Steel | Chung, Yu-Hsuan; Chen, Tai-Cheng; Lee, Hung-Bin ; Tsay, Leu-Wen | METALS | | 11 | |
| 22 | 2025 | Effect of Microstructure and Compressive Residual Stress on the Fatigue Performance of AISI 4140 Steel with QPQ Salt-Bath Nitro-Carburizing | Chen, Hao; Chen, Tai-Cheng; Hsu, Hsiao-Hung; Tsay, Leu-Wen | MATERIALS | | | |
| 23 | 2013 | Effect of microstructure on hydrogen embrittlement of various stainless steels | C.L. Lai; L.W. Tsay ; C. Chen | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | | 56 | |
| 24 | 1997 | The effect of microstructures on the fatigue crack growth in Ti-6Al-4V laser welds | Tsay, LW ; Tsay, CY | | | | |
| 25 | 2014 | The Effect of Nb and S Segregation on the Solidification Cracking of Alloy 52M Weld Overlay on CF8 Stainless Steel | H. A. Chu; M. C. Young; H. C. Chu; L. W. Tsay ; C. Chen | Journal of Materials Engineering and Performance | | 10 | |
| 26 | 2018 | The Effect of Normalizing Temperature on the Short-Term Creep Rupture of the Simulated HAZ in Gr.91 Steel Welds | Hao-Wei Wu; Tai-Jung Wu; Ren-Kae Shiue; Leu-Wen Tsay | Metals | | 6 | |
| 27 | 2016 | The effect of phase transformation in the plastic zone on the hydrogen-assisted fatigue crack growth of 301 stainless steel | Chen, T. C.; Chen, S. T.; Wu Kai ; Leu-Wen Tsay | Materials Characterization | | 8 | |
| 28 | 2016 | The effect of post-weld heat treatment on the microstructure and notched tensile fracture of Ti-15V-3Cr-3Al-3Sn to Ti-6Al-4V dissimilar laser welds | Hsieh, C. T.; Shiue, R. K.; Rong-Tan Huang ; Leu-Wen Tsay | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | | 14 | |
| 29 | 2014 | The effect of post-weld heat treatment on the notched tensile fracture of Ti-6Al-4V to Ti-6Al-6V-2Sn dissimilar laser welds | Hsieh, C. T.; Chu, C. Y.; Shiue, R. K.; Leu-Wen Tsay | Materials & Design | | 19 | |
| 30 | 2009 | The Effect of Preheating on Notch Fracture of Ti-4.5Al-3V-2Fe-2Mo Laser Welds | Leu-Wen Tsay ; Yun-Chen Jiang; Chun Chen | Materials Transactions | | 6 | |
| 31 | 2011 | The Effect of Preheating on Notched Tensile Strength and Impact Toughness of Ti-6Al-6V-2Sn Laser Welds | Leu-Wen Tsay ; Yun-Chen Jiang; Chun Chen | Materials Transactions | | 4 | |
| 32 | 2004 | The effect of residual thermal stresses on the fatigue crack growth of laser-annealed 304 stainless steels | L.W. Tsay ; M.C. Young; F.Y. Chou; R.K. Shiue | | | | |
| 33 | 2004 | The effect of residual thermal stresses on the fatigue crack growth of laser-surface-annealed AISI 304 stainless steel - Part I: computer simulation | Ren Kae Shiue; C.T. Chang; M.C. Young; L.W. Tsay | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | | 42 | |
| 34 | 2008 | The effect of sensitization on the hydrogen-enhanced fatigue crack growth of two austenitic stainless steels | Leu-Wen Tsay ; Liua, Y. -F.; Rong-Tan Huang ; Kuo, Roang-Ching | Corrosion Science | | | |
| 35 | 2007 | The effect of short time post-weld heat treatment on the fatigue crack growth of 2205 duplex stainless steel welds | M. C. Young; L. W. Tsay ; C. S. Shin; Sammy Chan | | | | |
| 36 | 2015 | Effects of Aging Treatments on the Mechanical Behavior of Ti-15V-3Cr-3Sn-3Al Alloy | Chou, Y. K.; Leu-Wen Tsay ; Chen, C. | Journal of Materials Engineering and Performance | | 8 | |
| 37 | 2010 | The effects of cold rolling and sensitisation on hydrogen embrittlement of AISI 304L welds | C.L. Lai; L.W. Tsay ; W. Kai; C. Chen | Corrosion Science | | | |
| 38 | 2018 | Effects of Grain Boundary Microconstituents on Heat Affect Zone Cracks in a Mar-M004 Weldment | Tai-Cheng Chen; Yi-Hsin Cheng; Leu-Wen Tsay ; Ren-Kae Shiue | Metals | | 7 | |
| 39 | 2021 | Effects of heat treatments on the microstructure and environment-induced cracking of CF8A steel in simulated BWR water | Chen, Tai-Cheng; Huang, Jiunn-Yuan; Shiue, Ren-Kae; Tsay, Leu-Wen | INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING | | 1 | |
| 40 | 2009 | The effects of hydrogen on fatigue crack growth behaviour of Ti-6Al-4V and Ti-4.5Al-3V-2Mo-2Fe alloys | Y.S. Ding; L.W. Tsay ; C. Chen | Corrosion Science | | 18 | |
| 41 | 2023 | Effects of Micro-Shot Peening on the Fatigue Strength of Anodized 7075-T6 Alloy | Su, Chih-Hang; Chen, Tai-Cheng; Ding, Yi-Shiun; Lu, Guan-Xun; Tsay, Leu-Wen | MATERIALS | | 0 | |
| 42 | 2023 | Effects of Micro-Shot Peening on the Stress Corrosion Cracking of Austenitic Stainless Steel Welds | Kang, Chia-Ying; Chen, Tai-Cheng; Tsay, Leu-Wen | METALS | | 2 | |
| 43 | 2014 | Effects of microstructures on the notch tensile fracture feature of heat-treated Ti-6Al-6V-2Sn alloy | Rong-Tan Huang ; Wen-Liang Huang; Rong-Hsin Huang; Leu-Wen Tsay | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | | 13 | |
| 44 | 2013 | The effects of rolling and sensitization treatments on the stress corrosion cracking of 304L stainless steel in salt-spray environment | Li, W. J.; Young, M. C.; Lai, Chai-Lin; Wu Kai ; Leu-Wen Tsay | Corrosion Science | | | |
| 45 | 2012 | The effects of rolling temperature and sensitization treatment on the sulfide stress corrosion cracking of 304L stainless steel | L.W. Tsay ; Y.J. Lin; C. Chen | Corrosion Science | | 20 | |
| 46 | 2016 | Effects of Simulated Microstructure on the Creep Rupture of the Modified 9Cr-1Mo Steel | T. H. Hsiao; T. C. Chen; S. L. Jeng; T. J. Chung; L. W. Tsay | Journal of Materials Engineering and Performance | | 13 | |
| 47 | 2025 | Effects of Surface Modifications on Rotating Bending Fatigue of Ni-Al Bronze Alloy | Lu, Guan-Xun; Chen, Tai-Cheng; Shiue, Ren-Kae; Tsay, Leu-Wen | METALS | | | |
| 48 | 2020 | Effects of Thermal Simulation on the Creep Fracture of the Mod. 9Cr-1Mo Weld Metal | Liao, C. C.; Wang, C. C.; Chen, T. C.; Shiue, R. K.; Leu-Wen Tsay | Metals | | 3 | |
| 49 | 2001 | Embrittlement of laser surface-annealed 17-4 PH stainless steel | L.W Tsay ; T.Y Yang; M.C Young | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | | 25 | |
| 50 | 2005 | Embrittlement of T-200 maraging steel in a hydrogen sulfide solution | L.W. Tsay ; Y.F. Hu; C. Chen | | | | |
| 51 | 2018 | The Evolution of Cast Microstructures on the HAZ Liquation Cracking of Mar-M004 Weld | Yi-Hsin Cheng; Jyun-Ting Chen; Ren-Kae Shiue; Leu-Wen Tsay | Metals | | 1 | |
| 52 | 2017 | The Evolution of the Weld Metal Microstructures in Dissimilar Titanium Welds Based on Al and Mo Equivalents | Yun-Da Tsai; Cheng-Ta Hsieh; Ren-Kae Shiue; Leu-Wen Tsay | Journal of Materials Engineering and Performance | | 0 | |
| 53 | 2022 | Failure Analysis of a C-276 Alloy Pipe in a Controlled Decomposition Reactor | Chen, Tai-Cheng; Yue, Gui-Lin; Kai, Wu ; Shiue, Ren-Kae; Tsay, Leu-Wen | MATERIALS | | 1 | |
| 54 | 2004 | Fatigue crack growth behavior of laser-annealed IN 718 alloy in hydrogen | L.W. Tsay ; H.H. Lin; R.K.Shiue | | | | |
| 55 | 2003 | Fatigue crack growth behavior of laser-processed 304 stainless steel in air and gaseous hydrogen | L.W. Tsay ; M.C. Young; M.C. Young | Corrosion Science | | 56 | |
| 56 | 2010 | Fatigue Crack Growth Behavior of Ti-4.5Al-3V-2Fe-2Mo Laser Welds | L. W. Tsay ; Y. S. Ding; W. C. Chung; C. Chen | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science | | 1 | |
| 57 | 2013 | Fatigue Crack Growth Characteristics of a Ti-15V-3Cr-3Sn-3Al Alloy with Variously Aged Conditions | Leu-Wen Tsay ; S. T. Chang; Chun Chen | Materials Transactions | | 2 | |
| 58 | 2004 | Fatigue crack growth of AISI 304 stainless steel welds in air and hydrogen | L.W. Tsay ; Y.C. Liu; M.C. Young; D.-Y. Lin | | | | |
| 59 | 2001 | Fatigue crack propagation in 2.25 Cr-1.0Mo steel weldments in air and hydrogen | L.W. Tsay ; C.C. Liu; YH Chao; Y.H. Shieh | Materials Science and Engineering A | | | |
| 60 | 1997 | Fatigue crack propagation of D6AC laser welds | Tsay, LW ; Chung, CS; Chen, C | | | | |
| 61 | 2012 | Fracture properties of hydrided Zircaloy-4 cladding in recrystallization and stress-relief anneal conditions | Hsiao-Hung Hsu; Leu-Wen Tsay | Journal of Nuclear Materials | | 10 | |
| 62 | 2009 | Gaseous hydrogen embrittlement of PH 13-8 Mo steel | Y.S. Ding; L.W. Tsay ; M.F. Chiang; C. Chen | Journal of Nuclear Materials | | 26 | |
| 63 | 1997 | Gaseous hydrogen embrittlement of T-250 laser welds | L. W. Tsay ; W. B. Huang; C. Chen | Journal of Materials Engineering and Performance | | 9 | |
| 64 | 2013 | Hot cracking susceptibility of alloy 52M weld overlays onto CF8 stainless steel | H.A. Chu; M.C. Young; H.C. Chu; L.W. Tsay ; C. Chen | | | 16 | |
| 65 | 1997 | Hydrogen embrittlement of a Ti-strengthened 250 grade maraging steel | Tsay, LW ; Huang, WB; Li, YM; Chen, C | | | | |
| 66 | 2006 | Hydrogen Embrittlement Susceptibility and Permeability of Two Ultra-high Strength Steels | L.W. Tsay ; M.Y. Chi; Y.F. Wu; J.K. Wu; D.-Y. Lin | | | | |
| 67 | 2000 | Hydrogen embrittlement susceptibility of laser-hardened 4140 steel | L.W Tsay ; Z.W Lin; R.K Shiue; C Chen | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | | 13 | |
| 68 | 1997 | Hydrogen sulphide stress corrosion cracking of 2.25Cr-Mo steel weldments | L.W. Tsay ; W.L. Lin; S.W. Cheng; G.S. Leu | | | 22 | |
| 69 | 1998 | Hydrogen sulphide stress corrosion cracking of weld overlays for desulfurization reactors | Leu-Wen Tsay ; Lin, We-Liang | Article | | | |
| 70 | 2008 | Hydrogen-assisted fatigue crack growth of AISI 316L stainless steel weld | L.W. Tsay ; J.J. Chen; J.C. Huang | | | 30 | |
| 71 | 2005 | Hydrogen-enhanced cracking of 2205 duplex stainless steel welds | M.C. Young; S.L.I. Chan; L.W. Tsay ; C.-S. Shin | Materials Chemistry and Physics | | 40 | |
| 72 | 2023 | Improved fatigue strength of Cr-electroplated 7075-T6 Al alloy by micro-shot peening | Su, Chih-Hang; Chen, Tai-Cheng; Tsay, Leu-Wen | INTERNATIONAL JOURNAL OF FATIGUE | | 2 | |
| 73 | 2002 | Improved Impact Toughness of 13Cr Martenstic Stainless Steel Hardened by Laser | L. W. Tsay ; Y. M. Chang; S. Torng; H. C. Wu | Journal of Materials Engineering and Performance | | | |
| 74 | 2007 | The influence of aging treatments on sulfide stress corrosion cracking of PH13-8Mosteel welds | L.W. Tsay ; H.H. Chen; M.F. Chiang; C. Chen | | | | |
| 75 | 2001 | Influence of gaseous hydrogen on the notched tensile strength of D6ac steel | Chang, Ta-Li; Leu-Wen Tsay ; Chen, C | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | | 27 | |
| 76 | 2010 | The Influence of Microstructures on the Notched Tensile Fracture of Ti-6Al-6V-2Sn Welds at Elevated Temperatures | Leu-Wen Tsay ; Chung-Liang Hsu; Chun Chen | Isij International | | 11 | |
| 77 | 2008 | Influence of Microstructures on the Notched Tensile Strength of Ti-4.5Al-3V-2Fe-2Mo Alloy | Wei-Chih Chung; Leu-Wen Tsay ; Yi-Shiung Ding; Chun Chen | Materials Transactions | | 6 | |
| 78 | 2006 | The influence of porosity on the fatigue crack growth behavior of Ti-6Al-4V laser welds | L. W. Tsay ; Y.-P. Shan; Y.-H. Chao; W. Y. Shu | Journal of Materials Science | | 35 | |
| 79 | 2006 | An Investigation of Hydrogen Sulfide Stress Corrosion Cracking of PH 13-8 Mo Stainless Steel | L. W. Tsay ; M. Y. Chi; H. R. Chen; C. Chen | Materials Science and Engineering A | | | |
| 80 | 2006 | Investigation of hydrogen sulfide stress corrosion cracking of PH13-8Mostainless steel | L.W. Tsay ; M.Y. Chi; H.R. Chen; C. Chen | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | | 42 | |
| 81 | 2004 | Laser beam welding of 2205 duplex stainless steel with metal powder additions | H. C. Wu; L. W. Tsay ; C. Chen | Isij International | | 30 | |
| 82 | 2018 | Liquation Cracking in the Heat-Affected Zone of IN738 Superalloy Weld | Cheng-Kai Lin ; Tai-Cheng Chen; Ren-Kae Shiue; Leu-Wen Tsay | Metals | | 32 | |
| 83 | 2019 | Microstructural Evolution and Short-Term Creep Rupture of the Simulated HAZ in T92 Steel Normalized at Different Temperatures | Tai-Jung Wu; Chien-Chun Liao; Tai-Cheng Chen; Ren-Kae Shiue; Leu-Wen Tsay | Metals | | | |
| 84 | 2021 | Microstructural Evolution of 9CrMoW Weld Metal in a Multiple-Pass Weld | Chuang, Yu-Lun; Wang, Chu-Chun; Chen, Tai-Cheng; Shiue, Ren-Kae; Tsay, Leu-Wen | METALS | | 1 | |
| 85 | 2009 | Microstructure and Notch Properties of Heat-Treated Ti-4.5Al-3V-2Mo-2Fe Laser Welds | Wei-Chih Chung; Leu-Wen Tsay ; Chun Chen | Materials Transactions | | 17 | |
| 86 | 2014 | Microstructure and notched tensile fracture of Ti-6Al-4V to Ti-4.5Al-3V-2Fe-2Mo dissimilar welds | Chu, C. Y.; Hsieh, C. T.; Leu-Wen Tsay | Materials & Design | | 15 | |
| 87 | 2011 | Microstructure and Stress Corrosion Cracking Behavior of the Weld Metal in Alloy 52-A508 Dissimilar Welds | Wei-Chih Chung; Jiunn-Yuan Huang; Leu-Wen Tsay ; Chun Chen | Materials Transactions | | 45 | |
| 88 | 1999 | Microstructures and fatigue crack growth of EH36 TMCP steel weldments | Leu-Wen Tsay ; Chern, Tsann-Shyi; Gau, Chung-Yun; Yang, Jer-Ren | | | | |
| 89 | 2023 | Mitigating Stress Corrosion Cracking of 304L and 316L Laser Welds in a Salt Spray through Micro-Shot Peening | Kang, Chia-Ying; Chen, Tai-Cheng; Shiue, Ren-Kae; Tsay, Leu-Wen | METALS | | | |
| 90 | 2012 | Notch brittleness of Ti-15V-3Cr-3Sn-3Al alloys | Hsiao-Hung Hsu; Yen-Chieh Wu; Leu-Wen Tsay | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | | 11 | |
| 91 | 2002 | Notch tensile properties of laser-surface-annealed 17-4 PH stainless steel in hydrogen-related environments | L.W. Tsay ; W.C. Lee; R.K .Shiue; J.K. Wu | | | | |
| 92 | 2011 | Notched Tensile and Impact Fracture of Ti-15-3 Laser Welds | Leu-Wen Tsay ; Yan-Jie Wu; Chun Chen | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science | | 4 | |
| 93 | 2010 | Notched tensile fracture of Ti-4.5Al-3V-2Fe-2Mo welds at elevated temperatures | L.W. Tsay ; C.L. Hsu; C. Chen | Materials Chemistry and Physics | | 16 | |
| 94 | 2012 | Notched Tensile Fracture of Ti-6Al-4V Laser Welds at Elevated Temperatures | M. Y. Lu; L. W. Tsay ; C. Chen | | | | |
| 95 | 2010 | Notched Tensile Fracture of Ti-6Al-6V-2Sn Laser Welds at Elevated Temperatures | L.W.Tsay ; C. L. Hsu; C. Chen | | | 0 | |
| 96 | 2009 | Notched Tensile Strength and Fatigue Crack Growth Behavior of Ti-6Al-6V-2Sn Laser Welds | Leu-Wen Tsay ; Chun-Xian Lee; Chun Chen | Materials Transactions | | 15 | |
| 97 | 2008 | Notched tensile strength of SP-700 laser welds | L.W. Tsay ; Y.S. Ding; W.C. Chung; C. Chen | Materials Letters | | 17 | |
| 98 | 2003 | Notched tensile testing of T-200 maraging steel and its laser welds in hydrogen | C.P Wu; L.W Tsay ; C Chen | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | | 19 | |
| 99 | 2009 | Notched tensile tests of cold-rolled 304L stainless steel in 40 wt.% 80 °C MgCl2 solution | C.L. Lai; L.W. Tsay ; W. Kai; C. Chen | Corrosion Science | | 15 | |
| 100 | 2016 | The oxidation behavior of an equimolar FeCoNiCrMn high-entropy alloy at 950 °C in various oxygen-containing atmospheres | Wu Kai ; Li, C. C.; Cheng, F. P.; Chu, K. P.; Kai, J. J.; Rong-Tan Huang ; Leu-Wen Tsay | Corrosion Science | | 93 | |
| 101 | 2014 | The oxidation behavior of three different zones of welded Incoloy 800H alloy | W.S. Chen; Wu Kai ; Leu-Wen Tsay ; J.J. Kai | Nuclear Engineering and Design | | 14 | |
| 102 | 2020 | Phase Transformation of a Ti-15Mo-5Zr-3Al Brazed Joint Using Clad Ti-15Cu-15Ni Filler | Yue, G. L.; Chen, T. C.; Shiue, R. K.; Leu-Wen Tsay | Metals | | 2 | |
| 103 | 2020 | Phase Transformation of Furnace Brazed Ti-15-5-3 Joint Using the Clad Ti-15Cu-15Ni Filler | Gui-Lin Yue; Tai-Cheng Chen; Ren-Kae Shiue; Leu-Wen Tsay | | | 1 | |
| 104 | 2000 | Reduction of hydrogen embrittlement in an ultra-high-strength steel by laser surface annealing | Leu-Wen Tsay ; Yang, T. Y. | | | | |
| 105 | 2013 | Relationship between Microstructure and Notch Tensile Strength in Ti-15V-3Cr-3Sn-3Al Alloy at Elevated Temperatures | Rong-Tan Huang ; Wen-Han Chen; Leu-Wen Tsay | Materials Transactions | | 1 | |
| 106 | 2003 | The reliability study of selected Sn-Zn based lead-free solders on Au Ni-P Cu substrate | R.K.Shiue; L.W. Tsay ; C.L. Lin; J.L. Ou | Microelectronics Reliability | | 36 | |
| 107 | 2014 | The role of induced alpha '-martensite on the hydrogen-assisted fatigue crack growth of austenitic stainless steels | T.C. Chen; S.T. Chen; L.W. Tsay | | | | |
| 108 | 2011 | Stress corrosion cracking in the heat-affected zone of A508 steel welds under high-temperature water | Wei-Chih Chung; Jiunn-Yuan Huang; Leu-Wen Tsay ; Chun Chen | Journal of Nuclear Materials | | 7 | |
| 109 | 2001 | Stress corrosion cracking of A588 steel weldments in flue gas related environments | Tsay, LW ; Chen, WY; Shiue, RK; Shiue, RH | Journal of Materials Engineering and Performance | | 1 | |
| 110 | 2015 | Stress corrosion cracking of austenitic weld deposits in a salt spray environment | Cai, J. B.; Yu, C.; Shiue, R. K.; Leu-Wen Tsay | Journal of Nuclear Materials | | 13 | |
| 111 | 2019 | Stress corrosion cracking of simulated heat-affected zone in a CF8A weld in high temperature water | Chen, Tai-Cheng; Chang, Hau-Han; Huang, Jiunn-Yuan; Tsay, Leu-Wen | J NUCL MATER | | 3 | |
| 112 | 2017 | Stress Corrosion Cracking Susceptibility of 304L Substrate and 308L Weld Metal Exposed to a Salt Spray | Chia-Hao Hsu; Tai-Cheng Chen; Rong-Tan Huang; Leu-Wen Tsay | Materials | | 14 | |
| 113 | 2003 | A study of Sn-Bi-Ag-(In) lead-free solders | Ren-Kae Shiue; Leu-Wen Tsay ; Chun-Lun Lin; Jia-Lin Ou | Journal of Materials Science | | 31 | |
| 114 | 2001 | Sulfide stress corrosion cracking and fatigue crack growth of welded TMCP API 5L X65 pipe-line steel | LW Tsay ; YC Chen; Sammy Chan | International Journal of Fatigue | | | |
| 115 | 2024/6/15 | Synergetic effects of micro-shot peening and gas nitriding on the fatigue performance of AISI 4140 steel | Lin, Guan-Wei; Chen, Tai-Cheng; Hsu, Hsiao-Hung; Tsay, Leu-Wen | SURFACE & COATINGS TECHNOLOGY | | | |
| 116 | 2003 | Tensile properties of LBW welds in Ti-6Al-4V alloy at evaluated temperatures below 450 degrees C | S.H Wang; M.D Wei; L.W Tsay | Materials Letters | | 96 | |
| 117 | 2003 | Tensile properties of LBW welds in Ti–6Al–4V alloy at evaluated temperatures below 450 °C | Shing Hoa Wang; M.D Wei; L.W Tsay | Materials Letters | | | |
| 118 | 2004 | The use of laser surface-annealed treatment to retard fatigue crack growth of austenitic stainless steel | L.W. Tsay ; Y.C. Liu; D.-Y. Lin; M.C. Young | | | | |
| 119 | 2022 | Vacuum Brazing of Metallized YSZ and Crofer Alloy Using 72Ag-28Cu Filler Foil | Huang, Liang-Wei; Shiue, Ren-Kae; Liu, Chien-Kuo; Cheng, Yung-Neng; Lee, Ruey-Yi; Tsay, Leu-Wen | MATERIALS | | 0 | |
| 120 | 2019 | Vacuum Brazing Ti-15-3 with a TiNiNb Braze Alloy | Kao, C. S.; Leu-Wen Tsay ; Wang, S. B.; Shiue, R. K. | Metals | | 1 | |
| 121 | 2020 | Vacuum brazing Zircaloy-2 alloy with a clad 60Ti-25Ni-15Nb filler | Lin, C. Z.; Kao, C. S.; Leu-Wen Tsay ; Shiue, R. K. | Vacuum | | 1 | |
