第 1 到 483 筆結果，共 483 筆。
| 公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
|---|---|---|---|---|---|---|---|
| 1 | 2025/4/30 | Three-Dimensional Defect Measurement and Analysis of Wind Turbine Blades Using Unmanned Aerial Vehicles | Hung, Chin-Yuan; Chu, Huai-Yu; Wang, Yao-Ming; Wen, Bor-Jiunn | DRONES | |||
| 2 | 2025/3/1 | Improving Online Voltage Stability Monitoring in Smart Grids: A Physics-Informed Guided Deep Learning Model | Su, Heng-Yi ; Lai, Chia-Ching | IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS | |||
| 3 | 2025 | Source and Transport of Dust to the North Pacific: Observations and Analysis From a High Mountain | Tsai, Fujung ; Chien, Yu-Chen; Chen, Wei-Nai; Notaro, Michael; Chen, Hung-Yu ; Lin, Neng-Huei; Hsu, Po-Chun; Lin, Yu-Chi | JOURNAL OF GEOPHYSICAL RESEARCH-ATMOSPHERES | |||
| 4 | 2024/9/30 | Measurement of stress characteristics in flexible multi-thin-film substrates using tomography common optical path interferometry | Wen, Bor-Jiunn ; Lee, Che-Yu | MEASUREMENT | |||
| 5 | 2024/8/1 | Multi-Physics Simulation and Optimization of Jet Electrodeposition for Ni-Diamond Composite Coatings | Wang, Xiaoli; Chou, Chau-Chang ; Zhou, Xin; Bao, Xin; Zhang, Qian | METALS | |||
| 6 | 2024/7/1 | Toward Improved Load Forecasting in Smart Grids: A Robust Deep Ensemble Learning Framework | Su, Heng-Yi ; Lai, Chia-Ching | IEEE TRANSACTIONS ON SMART GRID | |||
| 7 | 2024/6/1 | Applicability of Variable-Geometry Turbocharger for Diesel Generators under High Exhaust Back Pressure | Chen, Chien-Cheng; Jeng, Yuan-Liang ; Yen, Shun-Chang | JOURNAL OF MARINE SCIENCE AND ENGINEERING | |||
| 8 | 2024/5/30 | Influence of coating microstructure on the corrosion behavior of Inconel 625 coatings fabricated by different thermal spraying processes | Chen, Tai-Cheng; Chou, Chau-Chang ; Lin, Hwai-En; Yung, Tung -Yuan; Yang, Chang -Ting; Tsai, Ya-Wen | SURFACE & COATINGS TECHNOLOGY | |||
| 9 | 2024/5/30 | Investigating the corrosion resistance of Zn and Al coating deposited by arc thermal spraying process | Chen, Tai-Cheng; Yung, Tung-Yuan; Chou, Chau-Chang ; Wang, Yao-Ming | SURFACE & COATINGS TECHNOLOGY | |||
| 10 | 2024/4/1 | Characteristics of negative creep aging and its microstructure-oriented tensile behavior | Hsu, Cheng -An; Gan, Neng-Hao; Chang, Hong -Yi; Wang, Shing-Hoa ; Tsao, Tzu-Ching; Yang, Jer-Ren; Chiu, Po -Han; Zheng, Xue-Qian; Lee, Yuan-Tzu | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | |||
| 11 | 2024/3/23 | Effect of MoN on the structure and characteristics of MoN/ZrMoN bi-layer nitride films | Hu, Ding-Chiang; Kuo, Dong-Hau; Tsao, Chung-Chen; Ho, Jihng-Kuo ; Kuo, Chin-Guo; Hsu, Chun-Yao | BULLETIN OF MATERIALS SCIENCE | |||
| 12 | 2024/3/1 | Dynamic-Deep-Ensemble-Learning Scheme for Probabilistic Voltage Stability Margin Estimation to Enhance Resilient Power Grid Monitoring | Su, Heng-Yi ; Lai, Chia-Ching | IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS | |||
| 13 | 2024/12/1 | Modeling and performance estimation for L-shaped OWC wave energy converters with a theoretical correction for spring-like air compressibility | Nguyen, Duy Tong; Chow, Yi-Chih ; Lin, Chen-Chou | RENEWABLE ENERGY | |||
| 14 | 2024/12/1 | Improving the Impact Resistance and Post-Impact Tensile Fatigue Damage Tolerance of Carbon Fiber Reinforced Epoxy Composites by Embedding the Carbon Nanoparticles in Matrix | Jen, Yi-Ming ; Chen, Yu-Jen; Yu, Tzung-Han | POLYMERS | |||
| 15 | 2024/11/29 | Microstructure evolution and strain rate sensitivity of ductile Hf20Nb10Ti35Zr35 medium-entropy alloy after thermal cycling | Wang, Shing-Hoa ; Liu, Chia-Heng; Yeh, Jien-Wei; Tsao, Tzu-Ching; Li, Chia-Lin; Chang, Horng-Yi ; Yang, Jer-Ren; Hsueh, Chun-Hway; Chang, Liu-Wen; Zheng, Xue-Qian; Lee, Yuan-Tzu; Yang, Ya-Ching | JOURNAL OF ALLOYS AND COMPOUNDS | |||
| 16 | 2024/11/1 | Enhanced Energy Harvesting from Thermoelectric Modules: Strategic Manipulation of Element Quantity and Geometry for Optimized Power Output | Wu, Chun-, I ; Du, Kung-Wen; Tu, Yu-Hsuan | ENERGIES | |||
| 17 | 2024/11/1 | Online Transient Stability Margin Estimation Using Improved Deep Learning Ensemble Model | Su, Heng-Yi ; Lai, Chia-Ching | IEEE TRANSACTIONS ON POWER SYSTEMS | |||
| 18 | 2024/10/5 | GAIT PATTERN INVESTIGATIONS OF BIONIC PIEZOELECTRIC ROBOT | Lin, Yu-Chih ; Lin, Xiu-Xian | JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY | |||
| 19 | 2024/10/16 | Motion analysis of an undulatory fin underwater robot | Lin, Yu-Chih ; Chung, Yu-Chen; Lin, Chien-Tzu; Wang, Bo-Sheng | JOURNAL OF MECHANICS | |||
| 20 | 2024/1/1 | An Innovative Tubular Thermoelectric Generator (TTEG) for Enhanced Waste Heat Recovery in Industrial and Automotive Applications | Du, Kung-Wen; Wu, Chun-, I ; Papadakis, Georgios | APPLIED SCIENCES-BASEL | |||
| 21 | 2024/1/1 | Advancements in Thermoelectric Generator Design: Exploring Heat Exchanger Efficiency and Material Properties | Chen, Cheng-You; Du, Kung-Wen; Chung, Yi-Cheng; Wu, Chun-, I | ENERGIES | |||
| 22 | 2024/1/1 | Enhancing Ocean Thermal Energy Conversion Performance: Optimized Thermoelectric Generator-Integrated Heat Exchangers with Longitudinal Vortex Generators | Chung, Yi-Cheng; Wu, Chun-, I | ENERGIES | |||
| 23 | 2024/1/1 | Applicability of Reducing Valve Timing Overlap for Diesel Engines Under High Exhaust Back Pressure | Chen, Chien-Cheng; Jeng, Yuan-Liang ; Yen, Shun -Chang | JOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN | |||
| 24 | 2024 | 提升課堂學生的學習動機與學習成效具體作法-以非傳統加工為實踐課程 | 何靖國 |  | |||
| 25 | 2024 | 實施去中心化與適性策略於EMI工程科目：以流體力學課程為例 | 吳俊毅 | | |||
| 26 | 2024 | 利用鷹架理論奠基學思達教學法協助學生熟悉熱力學基礎 | 莊程媐 | | |||
| 27 | 2024 | Efficiency Enhancement in Ocean Thermal Energy Conversion: A Comparative Study of Heat Exchanger Designs for Bi<sub>2</sub>Te<sub>3</sub>-Based Thermoelectric Generators | Chung, Yi-Cheng; Wu, Chun-, I | MATERIALS | |||
| 28 | 2023/12/19 | Economical preparation and characterization of dual-ion conducting fuel cell | Lu, Yu-Tse; Huang, Wei-Cheng; Wang, Shing-Hoa ; Chen, Tai-Cheng; Chang, Horng-Yi | INTERNATIONAL JOURNAL OF HYDROGEN ENERGY | |||
| 29 | 2023/11/14 | Innovation in thermal cycling aging compared to isothermal aging for precipitation hardening stainless steel | Hsu, Cheng-An; Chiu, Po-Han; Chang, Hong-Yi; Wang, Shing-Hoa ; Tsao, Tzu-Ching; Yang, Jer-Ren; Lee, Yuan-Tzu | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | |||
| 30 | 2023/11/11 | Crystallization and activator reduction simultaneously for calcium sulfide nanophosphors and evaluation of red-light compensation - Environmental reliability | Wu, Chen-Yu; Lei, Chien-Ming; Wu, Rudder T.; Wang, Shing-Hoa ; Shih, Jing-Shiang; Chang, Horng-Yi | OPTICAL MATERIALS | |||
| 31 | 2023 | Night-Time Measurement and Skeleton Recognition Using Unmanned Aerial Vehicles Equipped With LiDAR Sensors Based on Deep-Learning Algorithms | Wen, Bor-Jiunn ; Chen, Yan-Hong | IEEE SENSORS JOURNAL | |||
| 32 | 2023 | 以BOPPPS架構結合人工智慧及工業4.0之創新教學實踐 | 蘇恆毅 | | |||
| 33 | 2023 | 將問題導向學習與科際整合教學應用於生醫機械跨領域課程之學習動機與成效探討--從機械外骨骼設計問題開始 | 林育志 | | |||
| 34 | 2023 | 以機構模型設計實作之專題導向式學習強化「機動學」與「機械設計」課程之垂直銜接與學習成效 | 張文桐 | | |||
| 35 | 2023 | 以演繹說明式概念教學法輔助跨領域課程生物流體力學概論，再搭配問題解決教學法提升學生好奇心。 | 莊程媐 | | |||
| 36 | 2023 | 虛實整合－翻轉教學融入分組教學改善熱傳學學習成效 | 吳俊毅 | | |||
| 37 | 2022 | Ultrathin arch-like labyrinthine acoustic metasurface for low-frequency sound absorption | Chen, Jung -San; Chung, Yu-Ting; Wang, Cheng-Yi; Liu, Chien-Hao; Yu, Chi-Hua; Chang, I-Ling ; Lin, Tzy-Rong | APPLIED ACOUSTICS | |||
| 38 | 2022 | Automatic Fruit Harvesting Device Based on Visual Feedback Control | Wen, Bor-Jiunn ; Yeh, Che-Chih | AGRICULTURE-BASEL | 1 | ||
| 39 | 2022 | Effect of Cu Additions on the Evolution of Eta-prime Precipitates in Aged AA 7075 Al-Zn-Mg-Cu Alloys | Hsiao, Ting-Jung; Chiu, Po-Han; Tai, Cheng-Lin; Tsao, Tzu-Ching; Tseng, Chien-Yu; Lin, Yi-Xian; Chen, Hsueh-Ren; Chung, Tsai-Fu; Chen, Chih-Yuan; Wang, Shing-Hoa ; Yang, Jer-Ren | METALS | 0 | ||
| 40 | 2022 | Welded microstructure and orientation variation of duplex Ti alloy through electrodynamic vibration | Liu, Chia-Heng; Kuo, Chen-Kuan; Wang, Shing-Hoa ; Yang, Yo-Lun; Chang, Horng-Yi ; Chiu, Po -Kai | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | 0 | ||
| 41 | 2022 | Investigation of Strain-Induced Precipitation of Niobium Carbide in Niobium Micro-Alloyed Steels at Elevated Temperatures | Tsao, Tzu-Ching; Chiu, Po-Han; Tseng, Chien-Yu; Tai, Cheng-Lin; Chen, Hsueh-Ren; Chung, Tsai-Fu; Chen, Chih-Yuan; Wang, Shing-Hoa ; Tsai, Yu-Ting; Yang, Jer-Ren | METALS | 0 | ||
| 42 | 2022 | Effect of Natural Ageing on Subsequent Artificial Ageing of AA7075 Aluminum Alloy | Tai, Cheng-Ling; Tai, Po-Jui; Hsiao, Ting-Jung; Chiu, Po-Han; Tseng, Chien-Yu; Tsao, Tzu-Ching; Chung, Tsai-Fu; Yang, Yo-Lun; Chen, Chih-Yuan; Wang, Shing-Hoa ; Yang, Jer-Ren | METALS | 1 | ||
| 43 | 2022 | 用AI讓機械活起來 | 蘇恆毅 | | |||
| 44 | 2022 | STEM科際整合工程數學教學 | 林育志 | | |||
| 45 | 2022 | Design of disk cam mechanisms with a translating follower having symmetrical double-concave faces | Chuang, Yu-Hsuan; Hsu, Kuan-Lun; Chang, Wen-Tung | JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY | 0 | ||
| 46 | 2022 | Experimental and numerical investigations on undulatory motion of a soft-fin-based underwater robot | Lin, Yu-Chih ; Zhang, Dai-Nong | JOURNAL OF MECHANICS | 0 | ||
| 47 | 2022 | Dynamic-Error-Compensation-Assisted Deep Learning Framework for Solar Power Forecasting | Su, Heng-Yi ; Tang, Chen | IEEE T SUSTAIN ENERG | 2 | ||
| 48 | 2022 | Nonscattering Photodetection in the Propagation of Unidirectional Surface Plasmon Polaritons Embedded with Graphene | Wu, Chia-Hung; Ku, Chih-Jen; Yu, Min-Wen; Yang, Jhen-Hong; Lu, Tien-Chang; Lin, Tzy-Rong ; Yang, Chan-Shan; Chen, Kuo-Ping | ACS APPLIED MATERIALS & INTERFACES | 2 | ||
| 49 | 2022 | Magnus-Forces Analysis of Pitched-Baseball Trajectories Using YOLOv3-Tiny Deep Learning Algorithm | Wen, Bor-Jiunn ; Chang, Che-Rui; Lan, Chun-Wei; Zheng, Yi-Chen | APPLIED SCIENCES-BASEL | 3 | ||
| 50 | 2022 | An improved design for rotating balance of assembled type conjugate disk cams | Chang, Wen-Tung ; Hu, Yu-En; Chang, Wei-Chien | MECHANISM AND MACHINE THEORY | 1 | ||
| 51 | 2022 | Evaluation of Transparent ITO/Nano-Ag/ITO Electrode Grown on Flexible Electrochromic Devices by Roll-to-Roll Sputtering Technology | Cheng, Yuang-Tung; Lu, Tsung-Lin; Hong, Min-Han; Ho, Jyh-Jier ; Chou, Chau-Chang ; Ho, Jiajer; Hsieh, Tung-Po | COATINGS | 3 | ||
| 52 | 2022 | Verification of the ability of Cu to dissolve in BCC delta in a delta-gamma Solid Solution above 1200 degrees C and boosting delta nano-hardness in Cu-containing PHSS | Gan, Neng-Hao; Sun, Yi-Hsuan; Tsao, Tzu-Ching; Li, Chia-Lin; Liu, Jia-Heng; Yen, Hung-Wei; Hsueh, Chun-Hway; Yang, Jer-Ren; Wang, Shing-Hoa ; Yeh, Jien-Wei; Chang, Horng-Yi ; Hou, Wen-Hsing | SCRIPTA MATERIALIA | 2 | ||
| 53 | 2022 | Influence of Different Addition Ratios of Fly Ash on Mechanical Properties of ADC10 Aluminum Matrix Composites | Juang, Shueiwan Henry ; Li, Ching-Feng | METALS-BASEL | 0 | ||
| 54 | 2022 | Crystalline characteristics of a dual-phase precipitation hardening stainless steel in quenched solid solution and aging treatments | Yu, Ping-Jui; Huang, Cheng-Yao; Lin, Yi-Ting; Su, Yu-Cheng; Yen, Hung-Wei; Hsu, Cheng-An; Wang, Shing-Hoa ; Yeh, Jien-Wei; Hou, Wen-Hsing; Lin, Tzy-Rong ; Hsu, Tai-Wen | MATERIALS CHEMISTRY AND PHYSICS | 1 | ||
| 55 | 2022 | Hierarchical nanotwins in Fe27Co24Ni23Cr26 high-entropy alloy subjected to high strain-rate Hopkinson bar deformation | Chung, Tsai-Fu; Lu, Shih-Yuan; Lin, Yo-Shiuan; Li, You-Lin; Chiu, Po-Han; Hsiao, Chien-Nan; Chen, Chih-Yuan; Kuo, Chin-Lung; Yeh, Jien-Wei; Wang, Shing-Hoa ; Lee, Woei-Shyan; Yang, Jer-Ren | MATERIALS CHARACTERIZATION | 2 | ||
| 56 | 2022 | Effect of Dispersing Multiwalled Carbon Nanotubes and Graphene Nanoplatelets Hybrids in the Matrix on the Flexural Fatigue Properties of Carbon/Epoxy Composites | Jen, Yi-Ming ; Ni, Wei-Lun | POLYMERS | 1 | ||
| 57 | 2022 | Uniform Torsion Analysis of Composite Shafts Using Point Collocation Method Based on Pascal Polynomials | Chang, Chih-Wen; Wu, Jyh-Hong; Lin, Ying-Ru; Lin, Yu-Feng; Huang, Nan-Nong | J MAR SCI TECH-JAPAN | 0 | ||
| 58 | 2022 | Theoretical analysis by Mindlin theory and experimental measurements of the piezoceramic circular bimorphs in resonance | Huang, Yu-Hsi; Lin, Yu-Chih ; Huang, Chi-Hung; Li, Cheng-Chi; Ma, Chien-Ching | INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | 2 | ||
| 59 | 2022 | Performance of High Efficiency Avalanche Poly-SiGe Devices for Photo-Sensing Applications | Cheng, Yuang-Tung; Lu, Tsung-Lin; Wang, Shang-Husuan; Ho, Jyh-Jier ; Chang, Chung-Cheng ; Chou, Chau-Chang ; Ho, Jiashow | SENSORS | 1 | ||
| 60 | 2022 | Controller Design for Unstable Time-Delay Systems with Unknown Transfer Functions | Tsai, Hsun-Heng; Fuh, Chyun-Chau ; Ho, Jeng-Rong; Lin, Chih-Kuang; Tung, Pi-Cheng | MATHEMATICS | 1 | ||
| 61 | 2022 | Development of surface plasmon polariton-based nanolasers | Li, Heng; Huang, Zhen-Ting; Hong, Kuo-Bin; Yu, Min-Wen; Wu, Chia-Hung; Yang, Chan-Shan; Lin, Tzy-Rong ; Chen, Kuo-Ping; Lu, Tien-Chang | JOURNAL OF APPLIED PHYSICS | 0 | ||
| 62 | 2022 | Strengthening mechanisms and microstructural evolution of ductile refractory medium-entropy alloy Hf20Nb10Ti35Zr35 | Su, I-An; Tseng, Ko-Kai; Yeh, Jien-Wei; El-Sayed, Badr; Liu, Chia-Heng; Wang, Shing-Hoa | SCRIPTA MATERIALIA | 22 | ||
| 63 | 2022 | Thermomechanical Property Measurement of Flexible Transparent Conductive-Film Substrates Based on Whole Folding Test by Reflective- Type Common-Path Liquid-Crystal Modulating Interferometry | Wen, Bor-Jiunn ; Hsu, Jui-Jen | IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT | 0 | ||
| 64 | 2022 | Vibration characteristics of hybrid functionally graded porous plates | Jihng-Kuo Ho ; Yi-Feng Huang; Yu-Chin Chiang; Chun-Sheng Chen | ||||
| 65 | 2022 | Instability of hybrid functionally graded porous plate | Jihng-Kuo Ho ; Ching-Rung Chu; Wei-Zhou Jian; Chun-Sheng Chen | ||||
| 66 | 2021 | Improvement in Tensile Quasi-Static and Fatigue Properties of Carbon Fiber-Reinforced Epoxy Laminates with Matrices Modified by Carbon Nanotubes and Graphene Nanoplatelets Hybrid Nanofillers | Jen, Yi-Ming ; Huang, Yu-Ching | NANOMATERIALS | 5 | ||
| 67 | 2021 | Different Involvement of Band 3 in Red Cell Deformability and Osmotic Fragility-A Comparative GP.Mur Erythrocyte Study | Kuo, Mei-Shin; Chuang, Cheng-Hsi ; Cheng, Han-Chih; Lin, Hui-Ru; Wang, Jong-Shyan; Hsu, Kate | CELLS-BASEL | 5 | ||
| 68 | 2021 | High-Efficiency Ultrathin Si-Based Solar Cells by Cascading Dilute-Nitride GaNAsP | Lin, Yen-Ju; Feng, David Jui-Yang; Lin, Tzy-Rong | MATERIALS | 0 | ||
| 69 | 2021 | Microstructural variation in fatigued interphase arrayed nano-precipitated Ti-microalloyed steel | Yen, Chieh-Ning; Chang, Liu-Wen; Hsu, Chen-An; Yang, Jer-Ren; Chang, Horng-Yi ; Wang, Shing-Hoa ; Chen, Hsueh-Ren | JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T | 1 | ||
| 70 | 2021 | Hybrid Graphene-Based Photonic-Plasmonic Biochemical Sensor with a Photonic and Acoustic Cavity Structure | Yang, Chan-Shan; Cheng, Yi-Sheng; Hsu, Young-Chou; Chung, Yi-Cheng; Hung, Jing-Ting; Liu, Chien-Hao; Hsu, Jin-Chen; Cheng-Ying Chen ; Yang, Chii-Rong; Li, Yu-Tai; Huang, Nan-Nong ; Lin, Tzy-Rong | CRYSTALS | 1 | ||
| 71 | 2021 | Applying Artificial Intelligence (AI) Techniques to Implement a Practical Smart Cage Aquaculture Management System | Chang, Chung-Cheng ; Wang, Jung-Hua ; Wu, Jenq-Lang ; Hsieh, Yi-Zeng ; Wu, Tzong-Dar ; Cheng, Shyi-Chy ; Chang, Chin-Chun ; Juang, Jih-Gau ; Liou, Chyng-Hwa ; Hsu, Te-Hua ; Huang, Yii-Shing ; Huang, Cheng-Ting ; Lin, Chen-Chou ; Peng, Yan-Tsung; Huang, Ren-Jie; Jhang, Jia-Yao; Liao, Yen-Hsiang; Lin, Chin-Yang | J MED BIOL ENG | 6 | ||
| 72 | 2021 | Rheotaxis and migration of an unsteady microswimmer | Omori, T.; Kikuchi, K.; Schmitz, M.; Pavlovic, M.; Cheng-His Chuang ; Ishikawa, T. | Journal of Fluid Mechanics | |||
| 73 | 2021 | Investigation on the ballistic induced nanotwinning in the Mn-free Fe27Co24Ni23Cr26 high entropy alloy plate | Chung, Tsai-Fu; Chiu, Po-Han; Tai, Cheng-Ling; Li, You-Lin; Wang, Le-Min; Chen, Chih-Yuan; Yeh, Jien-Wei; Hsiao, Chien-Nan; Ou, Da-Zheng; Wang, Shing-Hoa ; Yang, Jer-Ren | MATERIALS CHEMISTRY AND PHYSICS | 7 | ||
| 74 | 2021 | Effect of Anodization Treatment on the Thickness, Hardness, and Microstructural Characterization of Anodic Aluminum Oxide Film on AA 6061 and Critical Patent Analysis | Lee, Chun-Chieh; Chen, Chih-Wei; Lin, Jin-Shyong; Wang, Shing Hoa ; Lee, Chiang-Sheng; Chen, Chien-Chon; Lin, Ya-Hui; Chen, Chih-Yuan | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 1 | ||
| 75 | 2021 | Low-Threshold Bound State in the Continuum Lasers in Hybrid Lattice Resonance Metasurfaces | Yang, Jhen-Hong; Huang, Zhen-Ting; Maksimov, Dmitrii N.; Pankin, Pavel S.; Timofeev, Ivan V.; Hong, Kuo-Bing; Li, Heng; Chen, Jia-Wei; Hsu, Chu-Yuan; Liu, Yi-Yun; Lu, Tien-Chang; Lin, Tzy-Rong ; Yang, Chan-Shan; Chen, Kuo-Ping | LASER & PHOTONICS REVIEWS | 26 | ||
| 76 | 2021 | Microstructural Characterization and Mechanical Properties of Duplex and Super Austenitic Stainless Steels under Dynamic Impact Deformation | Wang, Shing-Hoa ; Hsiao, Wuan-Yun; Yang, Yo-Lun; Chen, Chih-Yuan; Yang, Jer-Ren; Lee, Woei-Shyan; Chen, Chien-Chon; Chiu, Po-Kai | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 1 | ||
| 77 | 2021 | Design of Optimal Controllers for Unknown Dynamic Systems through the Nelder-Mead Simplex Method | Tsai, Hsun-Heng; Fuh, Chyun-Chau ; Ho, Jeng-Rong; Lin, Chih-Kuang | MATHEMATICS | 1 | ||
| 78 | 2021 | An integrally formed design for the rotational balancing of disk cams | Chang, Wen-Tung ; Hu, Yu-En | MECHANISM AND MACHINE THEORY | 3 | ||
| 79 | 2021 | Curved-Mechanical Characteristic Measurements of Transparent Conductive Film-Coated Polymer Substrates Using Common-Path Optical Interferometry | Wen, Bor-Jiunn ; Hsu, Jui-Jen | COATINGS | 1 | ||
| 80 | 2021 | An Intelligent Data-Driven Learning Approach to Enhance Online Probabilistic Voltage Stability Margin Prediction | Su, Heng-Yi ; Hong, Hsu-Hui | IEEE T POWER SYST | 5 | ||
| 81 | 2021 | Effects of starlike control discs on flow structures and combustion capability | Yen, Shun-Chang ; Ye, Cheng-En; San, Kuo-Ching | ENERGY | 3 | ||
| 82 | 2021 | Thin layer electrolyte impregnation into porous anode-supported fuel cell by ultrasonic spray pyrolysis | Ko, Fu-Yin; Chiu, Te-Wei; Wu, Rudder T.; Chen, Tai-Cheng; Wang, Shing-Hoa ; Chang, Horng-Yi | INT J HYDROGEN ENERG | 3 | ||
| 83 | 2021 | Design of wind-turbine blades for improving aerodynamic performance using hybrid blades | Yen, Shun-Chang ; Liu, Wei-Shen; San, Kuo-Ching; Wang, Wei-Fan | OCEAN ENG | 3 | ||
| 84 | 2021 | Improvement of the Adhesion and Diamond Content of Electrodeposited Cu/Microdiamond Composite Coatings by a Plated Cu Interlayer | Wang, Xiaoli; Chou, Chau-Chang ; Wu, Liberty Tse-Shu; Wu, Rudder; Lee, Jyh-Wei; Chang, Horng-Yi | MATERIALS | 3 | ||
| 85 | 2021 | Developing an Optimal Scheduling of Taiwan Power System With Highly Penetrated Renewable Energy Resources and Pumped Hydro Storages | Su, Heng-Yi ; Jian-Hong Liu ; Chu, Chia-Chi; Lee, Sheng-Huei; Hong, Ying-Yi; Lin, Yu-Jen; Liao, Ching-Jung | IEEE T IND APPL | 4 | ||
| 86 | 2021 | Room-temperature active modulation of plasmonic nanolasers by current injection on hybrid graphene-insulator-metal platforms | Li, Heng; Huang, Zhen-Ting; Hong, Kuo-Bin; Chen, Jia-Wei; Cheng, Chang-Wei; Chen, Kuo-Ping; Lin, Tzy-Rong ; Gwo, Shang-jr; Lu, Tien-Chang | JOURNAL OF APPLIED PHYSICS | 4 | ||
| 87 | 2021 | Analysis and Experimental Verification of Mechanical Errors in Nine-Link Type Double-Toggle Mold/Die Clamping Mechanisms | Chang, Wen-Tung ; Lee, Wei-, I; Hsu, Kuan-Lun | APPLIED SCIENCES-BASEL | 6 | ||
| 88 | 2021 | Experimental and theoretical investigations on sensing and dynamic characteristics of PVDF thin film | Lin, Yu-Chih ; Huang, Yu-Hsi; Ma, Chien-Ching; Chang, Chun-Kai | JOURNAL OF MECHANICS | 4 | ||
| 89 | 2021 | Health-diagnosis of electromechanical system with a principal-component bayesian neural network algorithm | Wen, Bor-Jiunn ; Lin, Yung-Sheng; Tu, Hsing-Min; Hsieh, Cheng-Chang | JOURNAL OF INTELLIGENT & FUZZY SYSTEMS | 1 | ||
| 90 | 2021 | Intelligent wearable device of auxiliary force using fuzzy-Bayesian backpropagation control | Wen, Bor-Jiunn ; Kao, Chia-Hung; Yeh, Che-Chih | JOURNAL OF INTELLIGENT & FUZZY SYSTEMS | 3 | ||
| 91 | 2021 | Temperature-Dependent Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Tensile Quasi-Static and Fatigue Properties of Epoxy Nanocomposites | Jen, Yi-Ming ; Chang, Hao-Huai; Lu, Chien-Min; Liang, Shin-Yu | POLYMERS | 16 | ||
| 92 | 2021 | Applying the Simplex Method to Design the Optimal Parameters of a Sliding Mode Controller for a System With Input Saturation and Unknown Disturbance Bound | Fuh, Chyun-Chau ; Tsai, Hsun-Heng | IEEE ACCESS | 1 | ||
| 93 | 2021 | Investigation of resonant and energy harvesting characteristics of piezoelectric fiber composite bimorphs | Lin, Yu-Chih ; Tseng, Kuo-Shun; Ma, Chien-Ching | MATERIALS & DESIGN | 7 | ||
| 94 | 2021 | Structure and Photocatalytic Influence of N-doping ATO Nano-tubes on Antibacterial Activity Toward Escherichia coli | Wang, Shing-Hoa ; Liu, Shiu-Mei; Hu, Kan-Hung; Chen, Chien-Chon; Lin, Tai-Yuan ; Juang, Shuei-Wan ; Yen, Chia-Yuen; Lu, Shu-Ting; Liu, Chia-Heng | JOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN | 0 | ||
| 95 | 2020 | Investigation of nanotwins in the bimodal-structured Fe22Co22Ni20Cr22Mn14 alloy subjected to high-strain-rate deformation at cryogenic temperatures | Tsai-Fu Chung; Pin-Jung Chen; Cheng-Ling Tai; Po-Han Chiu; Yo-Shiuan Lin; Chien-Nan Hsiao; Chih-Yuan Chen; Shing-Hoa Wang ; Jien-Wei Yeh; Woei-Shyan Lee; Chin-Lung Kuo; Jer-Ren Yang | Materials Characterization | |||
| 96 | 2020 | Grey-Taguchi-Based Optimization of Wire-Sawing for a Slicing Ceramic | Tsai, Yao-Yang; Ho, Jihng-Kuo ; Wang, Wen-Hao; Hsieh, Chia-Chin; Tsao, Chung-Chen; Hsu, Chun-Yao | Processes | |||
| 97 | 2020 | Current Modulation of Plasmonic Nanolasers by Breaking Reciprocity on Hybrid Graphene-Insulator-Metal Platforms | Li, Heng; Huang, Zhen-Ting; Hong, Kuo-Bin; Hsu, Chu-Yuan; Chen, Jia-Wei; Cheng, Chang-Wei; Chen, Kuo-Ping; Lin, Tzy-Rong ; Gwo, Shang-, Jr.; Lu, Tien-Chang | ADVANCED SCIENCE | 11 | ||
| 98 | 2020 | Comparison of dynamic-aging creep and pre-aged creep in Ti-15-3 beta titanium alloy | Ping-Jui Yu; Yuan-Yi Hsu; Shing-Hoa Wang ; Jer-Ren Yang; Yo-Lun Yang; Horng-Yi Chang; Chih-Yuan Chen; Hsueh-Ren Chen | Materials Science and Engineering A | |||
| 99 | 2020 | Insight on creep behavior for arrayed interphase nano-precipitation in Ti-Microalloyed HSLA steel | Yang, Y. L.; Lin, Q. X.; Chen, C. Y.; Shing-Hoa Wang ; Chen, H. R.; Tsai, B. S.; Liu, H. C.; Yi-Ming Jen | Materials Chemistry and Physics | |||
| 100 | 2020 | 考慮再生能源高滲透率下之抽蓄水力電廠最佳機組排程研究 | 蘇恆毅 ; 劉建宏 ; 朱家齊; 李盛輝; 洪穎怡; 林堉仁; 廖清榮 | 台電工程月刊 | |||
| 101 | 2020 | 散熱鰭片的模型建立與打樣技術 | 何靖國 ; 羅雲康; 邱士育; 黃祥順; 張宗鈺 | ||||
| 102 | 2020 | Characteristics of flakes stacked Cr2N with many domains in super duplex stainless steel | Po-Chiang Lin; Yu-Ting Tsai; Neng-Hao Gan; Jer-Ren Yang; Shing-Hoa Wang ; Horng-Yi Chang ; Tzy-Rong Lin; Po-Kai Chiu | Crystals | |||
| 103 | 2020 | A Miniature Intermittent-Flow Respirometry System with a 3D-Printed, Palm-Sized Zebrafish Treadmill for Measuring Rest and Activity Metabolic Rates | Shih-Hao Huang ; Tsao, C. W.; Fang, Y. H. | Sensors | 3 | ||
| 104 | 2020 | Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Monotonic and Fatigue Properties of Uncracked and Cracked Epoxy Composites | Jen, Yi-Ming ; Huang, Jui-Cheng; Zheng, Kun-Yang | POLYMERS-BASEL | 17 | ||
| 105 | 2020 | Theoretical and numerical investigations on resonant characteristics of two piezoelectric plates coupled with a finite fluid field | Huang, Y. H.; Yu-Chih Lin ; Liao, C. Y.; Jhuang, K. L. | Archive of Applied Mechanics | |||
| 106 | 2020 | Microstructure Characterization of Massive Ferrite in Laser-Weldments of Interstitial-Free Steels | Liu, B. P. H.; Chung, T. F.; Yang, J. R.; Fu, J. X.; Chen, C. Y.; Shing-Hoa Wang ; Tsai, M. C.; Huang, C. Y. | Metals | 3 | ||
| 107 | 2020 | Wear Properties of Sc-Bearing Zr-Based Composite BMG with Nano-CuZr(2)under Lubrication | Shing-Hoa Wang ; Chung, H. H.; Hsu, C. A.; Liaw, P. K.; Chau-Chang Chou ; Rong-Tan Huang ; Horng-Yi Chang | Applied Sciences-Basel | |||
| 108 | 2020 | A novel technique for developing a dual-phase steel with a lower strength difference between ferrite and martensite | Chen, C. Y.; Li, C. H.; Tsao, T. C.; Chiu, P. H.; Tsai, S. P.; Yang, J. R.; Chiang, L. J.; Shing-Hoa Wang | Materials Today Communications | 10 | ||
| 109 | 2020 | Graphene-Loaded Plasmonic Zirconium Nitride and Gold Nanogroove Arrays for Surface-Charge Modifications | Yu, M. W.; Ishii, S.; Ku, J. R.; Yang, J. H.; Huang, C. H.; Lu, T. C.; Tzy-Rong Lin ; Nagao, T.; Chen, K. P. | Acs Applied Nano Materials | 6 | ||
| 110 | 2020 | Tribological and mechanical properties of Cu/Ni-microdiamond bilayers on brass substrates coated by composite electrodeposition technology | Wang, X. L.; Chau-Chang Chou ; Yang, Y. C.; Wu, R.; Lee, J. W.; Horng-Yi Chang | Surface Topography-Metrology and Properties | 6 | ||
| 111 | 2020 | Structural Colors Enabled by Lattice Resonance on Silicon Nitride Metasurfaces | Yang, J. H.; Babicheva, V. E.; Yu, M. W.; Lu, T. C.; Tzy-Rong Lin ; Chen, K. P. | Acs Nano | 58 | ||
| 112 | 2020 | Dual Photonic-Phononic Crystal Slot Nanobeam with Gradient Cavity for Liquid Sensing | Chung, Y. C.; Chiu, H. T.; Hsu, J. C.; Lin, Y. F.; Kuo, C. T.; Chang, Y. W.; Chen, C. Y.; Tzy-Rong Lin ; Nan-Nong Huang | Crystals | 1 | ||
| 113 | 2020 | Microstrain and boundary misorientation evolution for recrystallized super DSS after deformation | Li, J. S.; Cheng, G. J.; Yen, H. W.; Yang, Y. L.; Horng-Yi Chang ; Wu, C. Y.; Shing-Hoa Wang ; Yang, J. R. | Materials Chemistry and Physics | 8 | ||
| 114 | 2020 | Experimental analysis of interfacial shear stress and electrical resistance of indium tin oxide-coated polyethylene terephthalate films for a whole folding test | Bor-Jiunn Wen ; Huang, S. A.; Tseng, T. Y. | Journal of Plastic Film & Sheeting | 2 | ||
| 115 | 2020 | Static bending strength assessment of sandwich panels with glass/polypropylene faces and aluminum foam cores | Jen, Yi-Ming ; Tang, Zih-He | MODERN PHYSICS LETTERS B | 3 | ||
| 116 | 2020 | Static bending strength assessment of sandwich panels with glass/polypropylene faces and aluminum foam cores | Yi-Ming Jen ; Tang, Z. H. | Modern Physics Letters B | |||
| 117 | 2020 | A comparative study on the tribological behavior of various thermally sprayed Inconel 625 coatings in a saline solution and deionized water | Chen, T. C.; Chau-Chang Chou ; Yung, T. Y.; Cai, R. F.; Huang, J. Y.; Yang, Y. C. | Surface & Coatings Technology | |||
| 118 | 2020 | Preparation and investigation of diamond-incorporated copper coatings on a brass substrate by composite electrodeposition | Wang, X. L.; Chau-Chang Chou ; Lee, J. W.; Wu, R.; Chang, H. Y.; Ding, Y. F. | Surface & Coatings Technology | |||
| 119 | 2020 | Full-Spectrum Analysis of Perovskite-Based Surface Plasmon Nanolasers | Cheng, P. J.; Zheng, Q. Y.; Hsu, C. Y.; Li, H.; Hong, K. B.; Zhu, Y. Z.; Cui, Q. N.; Xu, C. X.; Lu, T. C.; Lin, R. | Nanoscale Research Letters | 6 | ||
| 120 | 2020 | Large delta T thermal cycling induced stress accelerates equilibrium and transformation in super DSS | Ping-Jui Yu; Shih-Che Chen; Hung-Wei Yen; Horng-Yi Chang; Jer-Ren Yang; Shing-Hoa Wang ; Po-Kai Chiu; Tzy-Rong Lin | Crystals | |||
| 121 | 2020 | 菲涅爾微結構隱形眼鏡殼模之流動平衡模擬分析 | 莊程媐 ; 陳炤彰; 楊筑渝; 魏俊安 | ||||
| 122 | 2020 | PLA-PW複材之流動長度是騙之模擬分析及短設比對 | 陳炤彰; 莊程媐 ; 董芳綺 | ||||
| 123 | 2020 | Research of Malaria- infected Red Blood Cells | Cheng-His Chuang ; Tohoku University Global COE Program GEM4 Summer School | GEM4参加報告書集 | |||
| 124 | 2020 | 非球面透鏡射出成形結合玻璃嵌件之形狀誤差模擬分析 | 陳炤彰; 莊程媐 ; 周立翔 | ||||
| 125 | 2020 | 隱形眼鏡殼模形狀誤差分析研究 | 陳炤彰; 莊程媐 ; 宋政潮 | ||||
| 126 | 2020 | 人工膝關節與膝內半月板模型建構 | 何靖國 ; 區文安; 黃祥順; 邱士育; 張宗鈺 | ||||
| 127 | 2020 | Dynamic vibration of carbon nanotube-reinforced hybrid composite plates | Jihng-Kuo Ho ; Wen-Hua Lo; Yu-Chou Chengz; Chun-Sheng Chen | ||||
| 128 | 2019 | Dynamic characteristics of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Jun-Kai Chen | ||||
| 129 | 2019 | Vibration and stability of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Wen-Hsueh Kung; Jun-Kai Chen | ||||
| 130 | 2019 | Thermal cycling induced stress-assisted sigma phase formation in super duplex stainless steel | Li, J. S.; Cheng, G. J.; Yen, H. W.; Wu, L. T.; Yang, Y. L.; Wu, R. T.; Yang, J. R.; Shing-Hoa Wang | Materials & Design | 6 | ||
| 131 | 2019 | Investigation of massive ferrite in an interstitial-free steel | Liu, B. P. H.; Yang, J. R.; Wu, Y. X.; Shen, P.; Fu, J. X.; Chen, C. Y.; Shing-Hoa Wang ; Tsai, M. C.; Huang, C. Y. | Materials Characterization | 5 | ||
| 132 | 2019 | Thermal effects on dynamic instability of hybrid nanocomposite plates | Chun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Wen-Hsueh Kung | ||||
| 133 | 2019 | PARAMETER IDENTIFICATION USING THE NELDER-MEAD SIMPLEX ALGORITHM FOR LOW SIGNAL-TO-NOISE RATIO SYSTEMS IN A FREQUENCY DOMAIN | Fuh, Chyun-Chau ; Tsai, Hsun-Heng | JOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN | 1 | ||
| 134 | 2019 | Strong optomechanical coupling of light and highly confined acoustic phonons in slot dual-beam phoxonic crystal cavities | Tzy-Rong Lin ; Chang, C. C.; Hsu, J. C. | Journal of Applied Physics | 7 | ||
| 135 | 2019 | PARAMETER IDENTIFICATION USING THE NELDER-MEAD SIMPLEX ALGORITHM FOR LOW SIGNAL-TO-NOISE RATIO SYSTEMS IN A FREQUENCY DOMAIN | Chyun-Chau Fuh ; Tsai, H. H. | Journal of Marine Science and Technology-Taiwan | |||
| 136 | 2019 | Plasmonic Nanolasers Enhanced by Hybrid Graphene-Insulator-Metal Structures | Li, Heng; Li, Jhu-Hong; Hong, Kuo-Bin; Yu, Min-Wen; Chun, Yi-Cheng; Hsu, Chu-Yuan; Yang, Jhen-Hong; Cheng, Chang-Wei; Huang, Zhen-Ting; Chen, Kuo-Ping; Lin, Tzy-Rong ; Gwo, Shangjr; Lu, Tien-Chang | NANO LETT | 36 | ||
| 137 | 2019 | A Self-Powered Glucose Biosensor Operated Underwater to Monitor Physiological Status of Free-Swimming Fish | Huang, Shih-Hao ; Chen, Wei-Hung; Lin, Yu-Chen | ENERGIES | 6 | ||
| 138 | 2019 | 化學鍍Ni-P薄膜微結構及提升黃銅基材疲勞壽命之研究 | 何靖國 ; 陳建勛; 黃國志; 鄭暐霖; 曾俊賢; 杜世綱; 許春耀 | ||||
| 139 | 2019 | 微射出成型的製程參數對於含微流道生物晶片特性之影響 | 陳俊生; 何靖國 ; 陳健志 | ||||
| 140 | 2019 | 射出成型件縫合線強度之探討 | 陳俊生; 何靖國 ; 嚴崇甡; 郭兆祥; 許春耀 | ||||
| 141 | 2019 | Inertial Effects on the Performance of a Bottom-Hinged Oscillating Wave Surge Converter | Shiaw-Yih Tzang ; Yi-Chih Chow ; Jiahn-Horng Chen ; Chen-Chou Lin | Journal of Offshore Mechanics and Arctic Engineering-Transactions of the Asme | 3 | ||
| 142 | 2019 | Numerical and experimental analysis of the effect of metal tie layers on improving electrical properties of gold coated poly (dimethylsiloxane) flexible multi-layered films during folding | Bor-Jiunn Wen ; Wang, P. C.; Hung, P. H. | Journal of Plastic Film & Sheeting | 2 | ||
| 143 | 2019 | Experimental and Numerical Investigation of Resonance Characteristics of Novel Pumping Element Driven by Two Piezoelectric Bimorphs | Lin, Yu-Chih ; Huang, Yu-Hsi; Chu, Kwen-Wei | APPL SCI-BASEL | 5 | ||
| 144 | 2019 | Residual Stress Image Inspections Based on Bending Testing for Flexible Transparent Conducting Substrates by Single-Direction Common-Path Image Interferometry | Bor-Jiunn Wen ; Huang, S. A. | Ieee Sensors Journal | 3 | ||
| 145 | 2019 | Ultrasonic-Assisted Innovative Polyurethane Tool to Polish Mold Steel | Ming-Yi Tsai; Yue-Feng Lin; Jihng-Kuo Ho ; Jing-Guang Yang | IJAT | 0 | ||
| 146 | 2019 | In-situ transmission electron microscopy investigation of compressive deformation in interphase-precipitated carbide-strengthened alpha-iron single-crystal nanopillars | Gao, M. Y.; Tsai, S. P.; Yang, J. R.; Chang, Y. L.; Ohmura, T.; Chen, C. Y.; Shing-Hoa Wang ; Wang, Y. T.; Huang, C. Y. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 4 | ||
| 147 | 2019 | Nanothick aluminate long-afterglow phosphors using inherited hydrothermal deriving | Wu, C. Y.; Lei, C. M.; Wu, R.; Takei, T.; Shing-Hoa Wang ; Chau-Chang Chou ; Horng-Yi Chang | Journal of Luminescence | 2 | ||
| 148 | 2019 | Dynamic proportional-fuzzy grip control for robot arm by two-dimensional vision sensing method | Wen, Bor-Jiunn ; Syu, Kai-Chen; Kao, Chia-Hung | JOURNAL OF INTELLIGENT & FUZZY SYSTEMS | 5 | ||
| 149 | 2019 | Hemocompatibility and adhesion of heparin/dopamine and heparin/collagen self-assembly multilayers coated on a titanium substrate | Cheng, W. J.; Pan, Y. H.; Wu, T. C.; Chau-Chang Chou ; Yeh, C. H.; Jyh-Jier Ho | Applied Surface Science | |||
| 150 | 2019 | Synergistic Effect on the Thermomechanical and Electrical Properties of Epoxy Composites with the Enhancement of Carbon Nanotubes and Graphene Nano Platelets | Yi-Ming Jen ; Huang, J. C. | Materials | |||
| 151 | 2019 | Dynamic proportional-fuzzy grip control for robot arm by two-dimensional vision sensing method | Bor-Jiunn Wen ; Syu, K. C.; Kao, C. H. | Journal of Intelligent & Fuzzy Systems | 3 | ||
| 152 | 2019 | 射出成形於非球面透鏡之殘留應力模擬分析研究 | 陳炤彰; 莊程媐 ; 郭柏陞; 李宥增 | ||||
| 153 | 2019 | Motile unicellular alga flowing in a microchannel | Cheng-His Chuang ; Kikuchi, K.; Ishikawa, T. | ||||
| 154 | 2018 | Size effect and strain induced double twin by nanoindentation in DSS weld metal of vibration-assisted GTAW | Hsueh, C. H.; Liao, M. J.; Shing-Hoa Wang ; Tsai, Y. T.; Yang, J. R.; Wu, R.; Lee, W. S. | Materials Chemistry and Physics | 5 | ||
| 155 | 2018 | Surface plasmon polariton nanolasers: Coherent light sources for new applications | Chou, Yu-Hsun; Chang, Chia-Jui; Lin, Tzy-Rong ; Lu, Tien-Chang | CHINESE PHYS B | 7 | ||
| 156 | 2018 | Effects of post-annealing on electrical properties of CuF2 center dot xH(2)O-doped KNN ceramics for rotary-linear ultrasonic motors | Weng, C. M.; Tsai, C. C.; Hong, C. S.; Chiang, C. H.; Chu, S. Y.; Lin, C. C.; Jyh-Jong Sheen | Ceramics International | |||
| 157 | 2018 | Parametric design methodology for maximizing energy capture of a bottom-hinged flap-type WEC with medium wave resources | Chang, Y. C.; Chen, D. W.; Shiaw-Yih Tzang ; Yi-Chih Chow ; Chen-Chou Lin | Renewable Energy | 12 | ||
| 158 | 2018 | Experimental investigations on wave energy capture of two bottom-hinged-flap WECs operating in tandem | Chang, Y. C.; Shiaw-Yih Tzang ; Yi-Chih Chow ; Jiahn-Horng Chen ; Chen-Chou Lin | Ocean Engineering | 7 | ||
| 159 | 2018 | Rear-surface line-contact optimization using screen-print techniques on crystalline solar cells for industrial applications | Ho, Jiajer; Wu, Te-Chun; Ho, Jyh-Jier ; Hung, Chih-Hsiang; Chen, Sung-Yu; Ho, Jia-Show; Tsai, Song-Yeu; Chou, Chau-Chang ; Yeh, Chi-Hsiao | MAT SCI SEMICON PROC | 2 | ||
| 160 | 2018 | Bioenergetic Health Assessment of a Single Caenorhabditis elegans from Postembryonic Development to Aging Stages via Monitoring Changes in the Oxygen Consumption Rate within a Microfluidic Device | Shih-Hao Huang ; Lin, Y. W. | Sensors | 8 | ||
| 161 | 2018 | Non-premixed flame characteristics and exhaust gas concentrations behind rifled bluff-body cones | Shun-Chang Yen ; Shih, C. L.; San, K. C. | Journal of the Energy Institute | 5 | ||
| 162 | 2018 | High-Performance Plasmonic Nanolasers with a Nanotrench Defect Cavity for Sensing Applications | Cheng, P. J.; Huang, Z. T.; Li, J. H.; Chou, B. T.; Chou, Y. H.; Lo, W. C.; Chen, K. P.; Lu, T. C.; Tzy-Rong Lin | Acs Photonics | 21 | ||
| 163 | 2018 | Fatigue behavior and microstructural characteristics of a duplex stainless steel weld metal under vibration-assisted welding | Tsai, Y. T.; Lin, P. C.; Chen, Y. W.; Shing-Hoa Wang ; Yang, J. R. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 5 | ||
| 164 | 2018 | Structure and luminescence of core-shell phosphor aluminate-boron oxide | Wu, C. Y.; Lei, C. M.; Takei, T.; Wu, R.; Shing-Hoa Wang ; Chau-Chang Chou ; Horng-Yi Chang | Journal of Alloys and Compounds | 2 | ||
| 165 | 2018 | Collective spreading of red blood cells flowing in a microchannel | Cheng-His Chuang ; Kikuchi, K.; Ueno, H.; Numayama, K.; Yamaguchi, T.; Ishikawa, T. | Journal of Biomechanics | |||
| 166 | 2018 | Hybrid photonic-plasmonic crystal nanocavity sensors | Cheng, P. J.; Chiang, C. K.; Chou, B. T.; Huang, Z. T.; Ku, Y. C.; Kuo, M. K.; Hsu, J. C.; Tzy-Rong Lin | Applied Physics a-Materials Science & Processing | 0 | ||
| 167 | 2018 | Ultracompact Pseudowedge Plasmonic Lasers and Laser Arrays | Chou, Y. H.; Hong, K. B.; Chang, C. T.; Chang, T. C.; Huang, Z. T.; Cheng, P. J.; Yang, J. H.; Lin, M. H.; Tzy-Rong Lin ; Chen, K. P.; Gwo, S.; Lu, T. C. | Nano Letters | 43 | ||
| 168 | 2018 | Combined Temperature and Moisture Effect on the Monotonic and Fatigue Strengths of Sandwich Beams with Glass-Polypropylene Faces and Aluminum Foam Cores | Yi-Ming Jen ; Chang, C. W. | Polymers & Polymer Composites | |||
| 169 | 2018 | Behavior of motile unicellular alga flowing in a microchannel | Cheng-His Chuang ; Kikuchi, K.; Kage, A.; Ishikawa, T. | ||||
| 170 | 2017 | Metal for Plasmonic Ultraviolet Laser: Al or Ag? | Chou, Y. H.; Hong, K. B.; Chung, Y. C.; Chang, C. T.; Chou, B. T.; Tzy-Rong Lin ; Arakelian, S. M.; Alodjants, A. P.; Lu, T. C. | Ieee Journal of Selected Topics in Quantum Electronics | 14 | ||
| 171 | 2017 | Effects of LiNbO3-doping on properties of (Na0.535K0.48)NbO3 piezoelectric ceramics with high electromechanical coupling coefficient for application in surface acoustic wave devices | Weng, C. M.; Tsai, C. C.; Hong, C. S.; Jyh-Jong Sheen ; Chu, S. Y.; Tang, J. F.; Zou, Y. H. | Ceramics International | |||
| 172 | 2017 | Deep-subwavelength plasmonic-photonic hybrid band gap opening by acoustic Lamb waves | Hsu, J. C.; Shih, J. H.; Tzy-Rong Lin | Applied Physics Letters | 1 | ||
| 173 | 2017 | Wind farm characteristics of side-by-side and tandem configurations | Yen, Shun-Chang ; Huang, Jiang-Xun; San, Kuo-Ching | OCEAN ENG | 1 | ||
| 174 | 2017 | GaAsSb spacer effect in quasi-type-II InAs coupled-QDs for intraband absorption enhancement | Feng, David Jui-Yang; Lin, Yen-Ju; Ku, Yun-Cheng; Jhang, Han-Yun; Lin, Tzy-Rong ; Kuo, Mao-Kuen | OPT MATER EXPRESS | 7 | ||
| 175 | 2017 | Hydrodynamic Simulation of an Orbital Shaking Test for the Degradation Assessment of Blood-Contact Biomedical Coatings | Cherng, W. J.; Dong, Z. S.; Chau-Chang Chou ; Yeh, C. H.; Pan, Y. H. | Micromachines | |||
| 176 | 2017 | Characteristics of flow configurations around side-by-side twin wind blades | Shun-Chang Yen ; Wu, C. H.; San, K. C. | Experimental Thermal and Fluid Science | 0 | ||
| 177 | 2017 | Improving the performance of solar cells with novel buffer structure by the chemical bath deposition technique | Ho, Jia-Show; Chang, Shih-Cheng; Ho, Jyh-Jier ; Hsu, Wei-Tse; Chiang, Chien-Chih; Tsai, Song-Yeu; Wang, Sheng-Shih; Lin, Cheng-Kai ; Chou, Chau-Chang ; Yeh, Chi-Hsiao; Wang, Kang L. | MAT SCI SEMICON PROC | 10 | ||
| 178 | 2017 | Low-temperature-sintered CuF2-doped NKN ceramics with excellent piezoelectric and dielectric properties | Weng, C. M.; Tsai, C. C.; Jyh-Jong Sheen ; Hong, C. S.; Chu, S. Y.; Chen, Z. Y.; Su, H. H. | Journal of Alloys and Compounds | |||
| 179 | 2017 | Measuring glass transition temperatures of polymers by using phase-stepping shadow moire | Hsu, J. S.; Bor-Jiunn Wen ; Li, W.; Yang, C. W. | Polymer Testing | 4 | ||
| 180 | 2017 | Surface roughness effects on aluminium-based ultraviolet plasmonic nanolasers | Chung, Y. C.; Cheng, P. J.; Chou, Y. H.; Chou, B. T.; Hong, K. B.; Shih, J. H.; Lin, S. D.; Lu, T. C.; Tzy-Rong Lin | Scientific Reports | 22 | ||
| 181 | 2017 | Simultaneous monitoring of oxygen consumption and acidification rates of a single zebrafish embryo during embryonic development within a microfluidic device | Shih-Hao Huang ; Huang, K. S.; Liou, Y. M. | Microfluidics and Nanofluidics | 7 | ||
| 182 | 2017 | Surface Properties of Nano-Film Type Patterning Electrode on Flexible Substrate for Bending Test | Bor-Jiunn Wen ; Lee, C. C.; Chang, M. W.; Lin, H. K.; Liou, Y. Y.; Cheng, S. W. | Science of Advanced Materials | 2 | ||
| 183 | 2017 | Lead-Free NKN-Based Materials for Ultrasonic Therapeutic Transducers: Resistance to Temperature and Humidity | Weng, C. M.; Tsai, C. C.; Hong, C. S.; Jyh-Jong Sheen ; Chu, S. Y. | Ecs Journal of Solid State Science and Technology | |||
| 184 | 2017 | Microstructures and mechanical properties of an a-C:N film as the interlayer and the outmost layer of a DLC-deposited Ti bio-alloy | Chau-Chang Chou ; Lin, J. S.; Wu, R. | Ceramics International | |||
| 185 | 2016 | An innovative optical-based method and automation system for rapid and non-destructive measurement of the web thickness of microdrills | Wen-Tung Chang ; Wu, J. H. | Measurement | |||
| 186 | 2016 | Non-contact resistance measurement of transparent electrodes deposited on flexible display substrates under repetitive bending test by terahertz time domain spectroscopy | Liu, T. A.; Yu, H. C. ; Chen, S. F.; Cheng, Y. C.; Bor-Jiunn Wen | Displays | 6 | ||
| 187 | 2016 | The Machining of Hard Mold Steel by Ultrasonic Assisted End Milling | Tsai, Ming; Chang, Chia; Ho, Jihng | Applied Sciences | |||
| 188 | 2016 | Oxidized dopamine as the interlayer between heparin/collagen polyelectrolyte multilayers and titanium substrate: An investigation of the coating's adhesion and hemocompatibility | Chau-Chang Chou ; Hsin, S. W.; Lin, H. C.; Yeh, C. H.; Wu, R.; Cherng, W. J. | Surface & Coatings Technology | |||
| 189 | 2016 | Oxidation resistance and mechanical properties of Ta-Al-N coatings | Lin, J. H.; Chau-Chang Chou ; Yung-I Chen | Surface & Coatings Technology | 11 | ||
| 190 | 2016 | Wear behavior of thermally sprayed Zn/15Al, Al and Inconel 625 coatings on carbon steel | Tai-Cheng Chen; Chau-Chang Chou ; Tung-Yuan Yung; Kun-Chao Tsai; Jiunn-Yuan Huang | Surface & Coatings Technology | 26 | ||
| 191 | 2016 | Experimental and Simulated Investigations of Thin Polymer Substrates with an Indium Tin Oxide Coating under Fatigue Bending Loadings | Hsu, J. S.; Lee, C. C.; Bor-Jiunn Wen ; Huang, P. C.; Xie, C. K. | Materials | 9 | ||
| 192 | 2016 | Boosted photocatalytic efficiency through plasmonic field confinement with bowtie and diabolo nanostructures under LED irradiation | Lee, C. H.; Liao, S. C.; Shing-Hoa Wang ; Lai, D. Y.; Chiu, P. K.; Lee, J. W.; Wu, W. F.; Tzy-Rong Lin | Optics Express | 6 | ||
| 193 | 2016 | INFLUENCE OF SHOT-PEENING -INDUCED RESIDUAL STRESSES ON POST-NECKING BEHAVIOR OF TEMPERED ULTRAHIGH-STRENGTH LOW ALLOY 300M STEEL | Shing-Hoa Wang ; Lin, Y. C.; Wu, B. F.; Hsu, H. C.; Yeh, J. J.; Yi-Ming Jen | Journal of Marine Science and Technology-Taiwan | |||
| 194 | 2016 | High-Operation-Temperature Plasmonic Nanolasers on Single-Crystalline Aluminum | Chou, Y. H.; Wu, Y. M.; Hong, K. B.; Chou, B. T.; Shih, J. H.; Chung, Y. C.; Chen, P. Y.; Tzy-Rong Lin ; Lin, C. C.; Lin, S. D.; Lu, T. C. | Nano Letters | 93 | ||
| 195 | 2016 | Investigation of Polishing Pads Impregnated with Fe and Al2O3 Particles for Single-Crystal Silicon Carbide Wafers | Ho, Jihng-Kuo ; Huang, Chih-Yung; Tsai, Ming-Yi; Tsai, Che-Cheng | Applied Sciences | |||
| 196 | 2016 | Design and experimental evaluation of a circular saw blade with self-clamped cutting inserts | Wen-Tung Chang ; Chen, L. C. | International Journal of Advanced Manufacturing Technology | |||
| 197 | 2016 | Decreased Hemolysis and Improved Hemodynamic Performance of Synchronized Bileaflet Mechanical Valve | Chau-Chang Chou ; Wu, T. C.; Liang, H. Y.; Yeh, C. H.; Cherng, W. J.; Yi-Chih Chow | Annals of Thoracic Surgery | 0 | ||
| 198 | 2016 | Modifications of the Cavity Perturbation Technique for Permittivity Measurements of Laminated Samples | Jyh-Jong Sheen ; Weng, C. M. | Ieee Transactions on Dielectrics and Electrical Insulation | |||
| 199 | 2016 | Single-crystalline aluminum film for ultraviolet plasmonic nanolasers | Chou, B. T.; Chou, Y. H.; Wu, Y. M.; Chung, Y. C.; Hsueh, W. J.; Lin, S. W.; Lu, T. C.; Tzy-Rong Lin ; Lin, S. D. | Scientific Reports | 51 | ||
| 200 | 2016 | Reaction effect of fly ash with Al-3Mg melt on the microstructure and hardness of aluminum matrix composites | Fan, L. J.; Shuei-Wan Juang | Materials & Design | |||
| 201 | 2016 | Modulation of wake flow and aerodynamic behaviors around a square cylinder using an upstream control bar | Shun-Chang Yen ; Wu, S. F.; San, K. C. | Experimental Thermal and Fluid Science | 7 | ||
| 202 | 2016 | Effects of Non-Stoichiometry on the Microstructure, Oxygen Vacancies, and Electrical Properties of KNN-Based Thin Films | Weng, C. M.; Tsai, C. C.; Hong, C. S.; Lin, C. C.; Chen, C. C.; Chu, S. Y.; Jyh-Jong Sheen ; Chen, Z. Y.; Su, H. H. | Ecs Journal of Solid State Science and Technology | |||
| 203 | 2016 | A NEW DESIGN OF WET SCRUBBER FOR REMOVAL OF FINE PARTICLES FROM EXHAUST GAS | Liao, B. W.; Shuei-Wan Juang ; Lin, H. | Environment Protection Engineering | |||
| 204 | 2015 | THEORETICAL ANALYSIS AND SPH SIMULATION FOR THE WAVE ENERGY CAPTURED BY A BOTTOM-HINGED OWSC | Chang, Y. C.; Chen, D. W.; Shiaw-Yih Tzang ; Yi-Chih Chow ; Jiahn-Horng Chen ; Chen-Chou Lin | Journal of Marine Science and Technology-Taiwan | 8 | ||
| 205 | 2015 | Realization of UV Plasmonic Nanolasers With Extremely Small Mode Volume | Chou, B. T.; Chou, Y. H.; Chiang, C. K.; Wu, Y. M.; Tzy-Rong Lin ; Lin, S. D.; Lu, T. C. | Ieee Journal of Selected Topics in Quantum Electronics | 3 | ||
| 206 | 2015 | Thermal characteristics and exhaust-gas analysis behind bluff-body frustums | Shun-Chang Yen ; Huang, Y. Z.; San, K. C. | Fuel | 3 | ||
| 207 | 2015 | Acousto-optic coupling in phoxonic crystal nanobeam cavities with plasmonic behavior | Hsu, J. C.; Lu, T. Y.; Tzy-Rong Lin | Optics Express | 14 | ||
| 208 | 2015 | Strong Optomechanical Interaction in Hybrid Plasmonic-Photonic Crystal Nanocavities with Surface Acoustic Waves | Tzy-Rong Lin ; Lin, C. H.; Hsu, J. C. | Scientific Reports | 23 | ||
| 209 | 2015 | Investigation of Optical and Flexible Characteristics for Organic-Based Cholesteric Liquid Crystal Display by Utilizing Bending and Torsion Loadings | Bor-Jiunn Wen ; Lee, C. C.; Hsu, J. S.; Huang, P. C.; Tsai, C. H. | Journal of Display Technology | 4 | ||
| 210 | 2015 | Effects of DLC coating on relaxing surface residual stress of the weld in titanium-bearing high-strength steel | Hung, C. P.; Wu, S. M.; Shing-Hoa Wang ; Wu, J. K.; Sung, C. M. | Journal of the Chinese Institute of Engineers | 1 | ||
| 211 | 2015 | Tribological and oxidational properties of porous high-pressure crystallized and vitamin E-incorporated ultra-high-molecular weight polyethylene as an artificial cartilage | Chau-Chang Chou ; Wang, Y. Z.; You, J. H.; Wu, C. L. | Advances in Mechanical Engineering | |||
| 212 | 2015 | Investigation of mechanical properties and microstructures of aluminum-fly ash composite processed by friction stirring | Shuei-Wan Juang ; Xue, C. S. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | |||
| 213 | 2015 | Influence of Preheating Temperatures and Adding Rates on Distributions of Fly Ash in Aluminum Matrix Composites Prepared by Stir Casting | Shuei-Wan Juang ; Fan, L. J.; Yang, H. P. O. | International Journal of Precision Engineering and Manufacturing | |||
| 214 | 2015 | Optomechanical coupling in phoxonic-plasmonic slab cavities with periodic metal strips | Tzy-Rong Lin ; Huang, Y. C.; Hsu, J. C. | Journal of Applied Physics | 10 | ||
| 215 | 2015 | Ultrastrong Mode Confinement in ZnO Surface Plasmon Nanolasers | Chou, Y. H.; Chou, B. T.; Chiang, C. K.; Lai, Y. Y.; Yang, C. T.; Li, H.; Tzy-Rong Lin ; Lin, C. C.; Kuo, H. C.; Wang, S. C.; Lu, T. C. | Acs Nano | 80 | ||
| 216 | 2015 | FUZZY ASSESSMENT ON RESERVOIR WATER QUALITY | Lin, R. T. ; Wen-Cheng Huang | Journal of Marine Science and Technology-Taiwan | 2 | ||
| 217 | 2015 | Light-Addressable Measurement of in Vivo Tissue Oxygenation in an Unanesthetized Zebrafish Embryo via Phase-Based Phosphorescence Lifetime Detection | Shih-Hao Huang ; Yu, C. H.; Chien, Y. L. | Sensors | 2 | ||
| 218 | 2015 | Nano-quasi-grating of optical diffraction on special stainless steel by a femtosecond-pulsed laser | Kuo, C. K.; Luo, S. W.; Tsai, H. Y.; Shing-Hoa Wang ; Wu, R. T.; Chou, M. C.; Shieh, M. C.; Yang, Y. C.; Huang, K.; Tsong-Ru Tsai | Materials Letters | 0 | ||
| 219 | 2015 | Dispersion of red blood cells in a micro channel | Cheng-His Chuang ; Kikuchi, K.; Numayama, K.; Imai, Y.; Yamaguchi, T.; Ishikawa, T., | ||||
| 220 | 2015 | Combined Diamond Disks in Chemical Mechanical Polishing | Ming Yi Tsai; Jihng Kuo Ho ; Jyu Lin Zeng | Key Engineering Materials | |||
| 221 | 2014 | Effect of temperature on fatigue strength of carbon nanotube/epoxy composites | Yi-Ming Jen ; Huang, C. Y. | Journal of Composite Materials | |||
| 222 | 2014 | Light-Addressable Electrodeposition of Magnetically-Guided Cells Encapsulated in Alginate Hydrogels for Three-Dimensional Cell Patterning | Shih-Hao Huang ; Chu, H. T.; Liou, Y. M.; Huang, K. S. | Micromachines | 3 | ||
| 223 | 2014 | Coupled nanowire-based hybrid plasmonic nanocavities on thin substrates | Cheng, P. J.; Chiang, C. K.; Chung, Y. C.; Tien, C. H.; Tzy-Rong Lin | Nanoscale Research Letters | 3 | ||
| 224 | 2014 | Novel method to remove tall diamond grits and improve diamond disk performance | Ho, Jihng Kuo ; Tsai, Che Hsiung; Tsai, Ming Yi; Yeh, Tung Sheng | The International Journal of Advanced Manufacturing Technology | |||
| 225 | 2014 | The greater scattering phenomenon beyond Bradford's law in patent citation | Huang, M. H.; Huang, W. T.; Chang, C. C.; Chen, D. Z.; Chang-Pin Lin | Journal of the Association for Information Science and Technology | |||
| 226 | 2014 | THEORETICAL DESIGN STUDY ON SHAFTING ALIGNMENT CALCULATION FOR HIGH SPEED CRAFT | Chang, M. H.; Shuei-Wan Juang | Brodogradnja | |||
| 227 | 2014 | Stop-flow Lithography to Continuously Fabricate Microlens Structures Utilizing an Adjustable Three-Dimensional Mask | Shih-Hao Huang ; Lin, C. K. | Micromachines | 3 | ||
| 228 | 2014 | NUMERICAL MODELING OF WAVE-INDUCED ROTATIONS OF A BOTTOM-HINGED FLAPPER WITH A SPH MODEL | Chen, D. W.; Shiaw-Yih Tzang ; Hsieh, C. M.; Hwang, R. R. J.; Yi-Chih Chow ; Jiahn-Horng Chen ; Chen-Chou Lin | Journal of Marine Science and Technology-Taiwan | 7 | ||
| 229 | 2014 | Flow patterns and characteristics of two tandem wing-blades at low Reynolds numbers | San, K. C.; Hung, S. C.; Shun-Chang Yen | Proceedings of the Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering | 2 | ||
| 230 | 2014 | SURFACE MODIFICATION OF ATO PHOTOCATALYST ON ITS BACTERICIDAL EFFECT AGAINST ESCHERICHIA COLI | Chiang, H. H.; Tsai, T. L.; Yang, Y. C.; Lee, J. W.; Yeun-Jung Wu ; Chen, C. C.; Tai-Yuan Lin ; Shing-Hoa Wang ; Chih-Ching Huang ; Hsin-Yiu Chou | Journal of Marine Science and Technology-Taiwan | |||
| 231 | 2014 | EFFECTS OF SWEEP ANGLES AND ANGLES OF ATTACK ON JUNCTION-FLOW PATTERNS | San, K. C.; Lin, Y. Z.; Shun-Chang Yen | Journal of Marine Science and Technology-Taiwan | 0 | ||
| 232 | 2014 | Development of a novel cooling system-assisted minimum quantity lubrication method for improvement of milling performance | Ho, Jihng Kuo ; Tsai, Che Hsiung; Tsai, Ming Yi; Tu, Ming Xim; Sung, James C. | Journal of the Chinese Institute of Engineers | |||
| 233 | 2014 | Development of a Novel Nanodiamond-Impregnated Polishing Pad for Chemical Mechanical Polishing of Oxide Film | Jihng-Kuo Ho ; Che-Hsiung Tsai; Ming-Yi Tsai; Jui-Hsuan Chiang | 中國機械工程學刊 | |||
| 234 | 2014 | A vision-aided automation system for destructive web thickness measurement of microdrills | Wen-Tung Chang ; Chuang, S. F.; Tsai, Y. S.; Tang, G. R.; Shiou, F. J. | International Journal of Advanced Manufacturing Technology | |||
| 235 | 2014 | Cold-flow patterns behind novel rifled bluff-body cones | San, K. C.; Shih, C. L.; Shun-Chang Yen | Journal of Mechanical Science and Technology | 1 | ||
| 236 | 2014 | Assessment of the inhibition of Dengue virus infection by carrageenan via real-time monitoring of cellular oxygen consumption rates within a microfluidic device | Shih-Hao Huang ; Lin, Y. S.; Wu, C. W.; Chang-Jer Wu | Biomicrofluidics | 6 | ||
| 237 | 2014 | 一種銥計畫體溫血壓量測技術 | 吳尚旻; 林進豐 ; 劉展志; 王照盛; 吳宗達 ; 張淑淨 ; 曾敬翔 ; 何志傑 ; 林鎮洲 ; 張忠誠 | International Journal of Science and Engineering | |||
| 238 | 2014 | Two-stage cumulative bending fatigue behavior for the adhesively bonded aluminum honeycomb sandwich panels | Yi-Ming Jen ; Teng, F. L.; Teng, T. C. | Materials & Design | |||
| 239 | 2013 | Blood compatibility and adhesion of collagen/heparin multilayers coated on two titanium surfaces by a layer-by-layer technique | Chau-Chang Chou ; Zeng, H. J.; Yeh, C. H. | Thin Solid Films | |||
| 240 | 2013 | Flame Patterns and Combustion Intensity Behind Rifled Bluff-Body Frustums | San, K. C.; Huang, Y. Z.; Shun-Chang Yen | Journal of Engineering for Gas Turbines and Power-Transactions of the Asme | 7 | ||
| 241 | 2013 | 一種銥計劃體溫血壓量測技術 | 吳尚旻; 林進豐 ; 劉展志; 王照盛; 吳宗達 ; 張淑淨 ; 張淑淨 ; 何志傑 ; 林鎮洲 ; 張忠誠 | ||||
| 242 | 2013 | Metabolic profile analysis of a single developing zebrafish embryo via monitoring of oxygen consumption rates within a microfluidic device | Shih-Hao Huang ; Huang, K. S.; Yu, C. H.; Hong-Yi Gong | Biomicrofluidics | |||
| 243 | 2013 | Adaptive multipath mitigation tracking system for GPS receiver | Mao, W. L.; Du, J. S.; Jyh-Jong Sheen ; Hwang, C. S. | Aerospace Science and Technology | |||
| 244 | 2013 | A NOVEL SIGNAL PROCESSING APPROACH FOR VALVE HEALTH CONDITION CLASSIFICATION OF A RECIPROCATING COMPRESSOR WITH SEEDED FAULTS CONSIDERING TIME-FREQUENCY PARTITIONS | Yih-Hwang Lin ; Lee, W. S.; Wu, C. Y. | Journal of Marine Science and Technology-Taiwan | 3 | ||
| 245 | 2013 | NUMERICAL STABILITY ANALYSIS FOR INDEPENDENT MODAL VIBRATION SUPPRESSION OF A FLUID-CONVEYING PIPE USING A PIEZOELECTRIC INERTIA ACTUATOR | Yih-Hwang Lin ; Chen, J. L.; Chu, C. L.; Tsai, Y. K. | Journal of Marine Science and Technology-Taiwan | 0 | ||
| 246 | 2013 | Photonic band gaps induced by submicron acoustic plate waves in dielectric slab waveguides | Hsu, J. C.; Lin, C. H.; Ku, Y. C.; Tzy-Rong Lin | Optics Letters | 10 | ||
| 247 | 2013 | Thermal stability of CrTaN hard coatings prepared using biased direct current sputter deposition | Lin, K. Y.; Chau-Chang Chou ; Yung-I Chen | Thin Solid Films | 8 | ||
| 248 | 2013 | Characterization and haemocompatibility of fluorinated DLC and Si interlayer on Ti6Al4V | Chau-Chang Chou ; Wu, Y. Y.; Lee, J. W.; Yeh, C. H.; Huang, J. C. | Surface & Coatings Technology | |||
| 249 | 2013 | DESIGN OF A MICROWAVE BANDPASS FILTER WITH COMPACT SIZE AND WIDE STOPBAND | Jyh-Jong Sheen ; Cheng, Y. H.; Liu, W. S. | Microwave and Optical Technology Letters | |||
| 250 | 2013 | Light-Addressed Electrodeposition of Enzyme-Entrapped Chitosan Membranes for Multiplexed Enzyme-Based Bioassays Using a Digital Micromirror Device | Shih-Hao Huang ; Wei, L. S.; Chu, H. T.; Jiang, Y. L. | Sensors | 15 | ||
| 251 | 2013 | Cold-flow patterns and mixing index behind/near rifled bluff-body frustums | San, K. C.; Huang, Y. Z.; Shun-Chang Yen | Journal of Visualization | 3 | ||
| 252 | 2013 | Suppression of Hunting in an ILPMSM Driver System Using Hunting Compensator | Yao, W. H.; Tung, P. C.; Chyun-Chau Fuh ; Chou, F. C. | Ieee Transactions on Industrial Electronics | |||
| 253 | 2013 | Flame Structure and Combustion Capability of Non-Premixed Rifled Nozzles | San, K. C.; Hsu, H. J.; Shun-Chang Yen | Journal of Engineering for Gas Turbines and Power-Transactions of the Asme | 2 | ||
| 254 | 2013 | Fatigue characterization of acid-treated carbon nanotube/epoxy composites | Yi-Ming Jen ; Huang, C. Y. | Journal of Composite Materials | |||
| 255 | 2013 | Microwave Measurements of Dielectric Constants for High Dielectric Constant Ceramic Materials by Mixture Equations | Jyh-Jong Sheen ; Wang, Y. L. | Ieee Transactions on Dielectrics and Electrical Insulation | |||
| 256 | 2013 | Plasmonic gap-mode nanocavities with metallic mirrors in high-index cladding | Cheng, P. J.; Weng, C. Y.; Chang, S. W.; Tzy-Rong Lin ; Tien, C. H. | Optics Express | 10 | ||
| 257 | 2013 | IMPROVING COMBUSTION INTENSITY AND MODULATING FLAME BEHAVIORS USING HELICAL-GROOVED CONES | Shun-Chang Yen ; Shih, C. L. | Journal of Mechanics | 1 | ||
| 258 | 2013 | Cladding Effect on Hybrid Plasmonic Nanowire Cavity at Telecommunication Wavelengths | Cheng, P. J.; Weng, C. Y.; Chang, S. W.; Tzy-Rong Lin ; Tien, C. H. | Ieee Journal of Selected Topics in Quantum Electronics | 6 | ||
| 259 | 2013 | An optical-based method and system for the web thickness measurement of microdrills considering runout compensation | Wen-Tung Chang ; Lu, S. Y.; Chuang, S. F.; Shiou, F. J.; Tang, G. R. | International Journal of Precision Engineering and Manufacturing | |||
| 260 | 2013 | Automated optical inspection for the runout tolerance of circular saw blades | Wen-Tung Chang ; Su, C. H.; Guo, D. X.; Tang, G. R.; Shiou, F. J. | International Journal of Advanced Manufacturing Technology | |||
| 261 | 2013 | Temperature-dependent monotonic and fatigue bending strengths of adhesively bonded aluminum honeycomb sandwich beams | Yi-Ming Jen ; Lin, H. B. | Materials & Design | |||
| 262 | 2013 | Application of the inclined exposure and molding process to fabricate a micro beam-splitter with nanometer roughness | Chuang, Y. J.; Shih-Hao Huang ; Chen, Y. C.; Hung, K. Y. | Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems | 2 | ||
| 263 | 2013 | Enhanced acousto-optic interaction in two-dimensional phoxonic crystals with a line defect | Tzy-Rong Lin ; Lin, C. H.; Hsu, J. C. | Journal of Applied Physics | 40 | ||
| 264 | 2013 | Tolerance analysis and synthesis of cam-modulated linkages | Wen-Tung Chang ; Wu, L. I. | Mathematical and Computer Modelling | |||
| 265 | 2013 | Influences of upstream floor roughness and aerodynamic parameters on swept-wing junction flow | Shun-Chang Yen ; San, K. C.; Lin, Y. Z. | Experimental Thermal and Fluid Science | 3 | ||
| 266 | 2013 | Mechanical properties of fluorinated DLC and Si interlayer on a Ti biomedical alloy | Chau-Chang Chou ; Wu, Y. Y.; Lee, J. W.; Huang, J. C.; Yeh, C. H. | Thin Solid Films | |||
| 267 | 2013 | Cells adhered and cultured on microcantilevers | Wu, C. W.; Chang, S. P.; Shih-Hao Huang ; Chang-Jer Wu | Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems | 1 | ||
| 268 | 2013 | COMBINED TEMPERATURE AND MOISTURE EFFECT ON THE STRENGTH OF CARBON NANOTUBE REINFORCED EPOXY MATERIALS | Yi-Ming Jen ; Huang, C. Y. | Transactions of the Canadian Society for Mechanical Engineering | |||
| 269 | 2013 | Gradient diffusion of red blood cells in blood flow through a Y-shape microchannel | Cheng-His Chuang ; Ishikawa, T.; Ueno, H.; Numayama, K.; Imai, Y.; Yamaguchi, T. | ||||
| 270 | 2012 | Light-addressable measurements of cellular oxygen consumption rates in microwell arrays based on phase-based phosphorescence lifetime detection | Shih-Hao Huang ; Hsu, Y. H.; Wu, C. W.; Chang-Jer Wu | Biomicrofluidics | 13 | ||
| 271 | 2012 | Twinned formation in weld metal of titanium bearing nano precipitated high strength steel | Hsu, P. W.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Wang, Y. M.; Lin, Q. X.; Horng-Yi Chang | Materials Chemistry and Physics | |||
| 272 | 2012 | Characteristic Flow Field Behind a Square-Cylinder Using Upstream Mesh Fences | Shun-Chang Yen ; Yang, C. W. | Journal of Fluids Engineering-Transactions of the Asme | 3 | ||
| 273 | 2012 | TECHNOLOGY FORECASTING VIA PUBLISHED PATENT APPLICATIONS AND PATENT GRANTS | Chen, D. Z.; Chang-Pin Lin ; Huang, M. H.; Chan, Y. T. | Journal of Marine Science and Technology-Taiwan | |||
| 274 | 2012 | Stress concentration effect on the fatigue properties of carbon nanotube/epoxy composites | Yi-Ming Jen ; Wang, Y. C. | Composites Part B-Engineering | |||
| 275 | 2012 | THE STUDY OF CHLORIDE ION TRANSPORT BEHAVIOR OF MORTAR UNDER DIFFERENT STORING ENVIRONMENT TEMPERATURES | Weng, S. H.; Chung-Chia Yang ; Cho, S. W.; Kuo-Cheng Yang | Journal of Marine Science and Technology-Taiwan | |||
| 276 | 2012 | THE RELATIONSHIP BETWEEN MIGRATION TIME IN ACMT AND PONDING TIME IN PONDING TEST FOR CEMENTITIOUS MATERIALS | Chung-Chia Yang ; Tsai, Y. M.; Kuo-Cheng Yang | Journal of Marine Science and Technology-Taiwan | |||
| 277 | 2012 | SQUARE-CYLINDER FLOW CHARACTERISTICS MODULATED USING UPSTREAM CONTROL ROD | Shun-Chang Yen ; Wu, S. F. | Journal of Mechanics | 5 | ||
| 278 | 2012 | Applying the ARPSO Algorithm to Shafting Alignment Optimization Design | Shuei-Wan Juang ; Ming-Hsiung Chang; Juan-Chen Huang | Brodogradnja | |||
| 279 | 2012 | Novel core-shell structure of perovskite anode and characterization | Shing-Hoa Wang ; Wang, Y. M.; Lai, C. W.; Lin, C. H.; Cheng, S. Y.; Horng-Yi Chang | International Journal of Hydrogen Energy | 9 | ||
| 280 | 2012 | Fatigue life evaluation of adhesively bonded scarf joints | Yi-Ming Jen | International Journal of Fatigue | |||
| 281 | 2012 | Combining a feedback linearization controller with a disturbance observer to control a chaotic system under external excitation | Chyun-Chau Fuh ; Tsai, H. H.; Yao, W. H. | Communications in Nonlinear Science and Numerical Simulation | |||
| 282 | 2012 | The Effect of Nitrogen-Doped ATO Nanotubes on Radical Multiplication of Buffer Media by Visible Light Photocatalysis Rather UV | Hu, K. H.; Todd Hsu ; Chen, C. C.; Tsai, H. T.; Chiang, H. H.; Tai-Yuan Lin ; Shing-Hoa Wang | Journal of Nanomaterials | |||
| 283 | 2012 | Collective diffusion of red blood cells from high concentration to low | Chuang, C. H ; Ishikawa, T.; Ueno, H.; Numayama, K.; Imai, Y.; Yamaguchi, T. | ||||
| 284 | 2012 | Impregnation of Hydrogenated Graphite in Polyurethane Pad for Improved Performance in Chemical-Mechanical Polishing Processes | Tsai, M. Y.; Ho, J. K. ; Tsai, C. H.; Chen, C. Y. | Advanced Science Letters | 0 | ||
| 285 | 2011 | Finite element based fatigue life estimation of the solder joints with effect of intermetallic compound growth | Chiou, Y. C.; Yi-Ming Jen ; Huang, S. H. | Microelectronics Reliability | |||
| 286 | 2011 | STUDIES OF DIELECTRIC CONSTANT MEASUREMENTS AT MICROWAVE FREQUENCY USING MIXING EQUATIONS-THE ANALYSES ON FIVE RULES | Jyh-Jong Sheen ; Hong, Z. W.; Liu, W. H.; Mao, W. L. | Microwave and Optical Technology Letters | |||
| 287 | 2011 | Gap-flow patterns behind twin-cylinders at low Reynolds number | Shun-Chang Yen ; Liu, C. T. | Journal of Mechanical Science and Technology | 4 | ||
| 288 | 2011 | Quality Measurements of Voice Over IP for a Hybrid Local Area Network | Chi-Min Li ; Chang-Pin Lin | ||||
| 289 | 2011 | A Robust Uncertainty Controller With System Delay Compensation for an ILPMSM System With Unknown System Parameters | Yao, W. H.; Tung, P. C.; Chyun-Chau Fuh ; Chou, F. C. | Ieee Transactions on Industrial Electronics | |||
| 290 | 2011 | Light-addressable electrodeposition of cell-encapsulated alginate hydrogels for a cellular microarray using a digital micromirror device | Shih-Hao Huang ; Hsueh, H. J.; Jiang, Y. L. | Biomicrofluidics | 17 | ||
| 291 | 2011 | Martensite nucleation site and grain refinement in duplex titanium alloy weldment by active flux with nanoparticle addition | Hsu, P. W.; Chen, R. S.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Tsai, S. Y.; Duh, J. G. | Science and Technology of Welding and Joining | 6 | ||
| 292 | 2011 | Notch Effect and FEM Analysis of Tensile Behavior of Ti-6Al-4V | Tsai, G. C.; Shing-Hoa Wang ; Wang, C. C.; Kao, C. H. | Advanced Science Letters | 0 | ||
| 293 | 2011 | Flow patterns and vortex shedding behavior behind a square cylinder | Shun-Chang Yen ; Yang, C. W. | Journal of Wind Engineering and Industrial Aerodynamics | 44 | ||
| 294 | 2011 | Wear behavior of Er-bearing Cu-based amorphous/crystal BMG composite under oil lubrication | Chau-Chang Chou ; Chung, H. H.; Liaw, P. K.; Liou, Y.; Huang, J. C.; Hsu, Y. Y.; Shing-Hoa Wang | Intermetallics | 11 | ||
| 295 | 2011 | Winglet Dihedral Effect on Flow Behavior and Aerodynamic Performance of NACA0012 Wings | Shun-Chang Yen ; Fei, Y. F. | Journal of Fluids Engineering-Transactions of the Asme | |||
| 296 | 2011 | Dynamic strain aging in low cycle fatigue of duplex titanium alloys | Lin, Y. H.; Hu, K. H.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Lin, C. K. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 20 | ||
| 297 | 2011 | HYDROGEN ABSORPTION/DESORPTION IN A METAL HYDRIDE REACTOR ACCOUNTING FOR VARIED EFFECTIVE THERMAL CONDUCTIVITY | Wang, C. Y.; Chyou, S. D.; Huang, N. N.; Shing-Hoa Wang ; Hwa-Chong Tien | Journal of Marine Science and Technology-Taiwan | |||
| 298 | 2011 | Selective Deposition of Electrospun Alginate-Based Nanofibers onto Cell-Repelling Hydrogel Surfaces for Cell-Based Microarrays | Shih-Hao Huang ; Chien, T. C.; Hung, K. Y. | Current Nanoscience | 6 | ||
| 299 | 2011 | DEFORMATION OF ROLLING SHUTTERS UNDER UNIFORM WIND PRESSURE | Nan-Nong Huang ; Chang, S. M. | Journal of Marine Science and Technology-Taiwan | |||
| 300 | 2011 | Reynolds number effects on flow characteristics and aerodynamic performances of a swept-back wing | Shun-Chang Yen ; Huang, L. C. | Aerospace Science and Technology | 3 | ||
| 301 | 2011 | AERODYNAMIC PERFORMANCE AND SHEDDING CHARACTERISTICS ON A SWEPT-BACK WING | Shun-Chang Yen | Journal of Marine Science and Technology-Taiwan | |||
| 302 | 2011 | Microtwin formation in the a phase of duplex titanium alloys affected by strain rate | Lin, Y. H.; Wu, S. M.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Yang, C. C.; Chiou, C. S. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 15 | ||
| 303 | 2011 | Experimental investigation on the effect of tensile pre-strain on ratcheting behavior of 430 Stainless Steel under fully-reversed loading condition | Chiou, Y. C.; Wen-Kai Weng ; Yi-Ming Jen | Engineering Failure Analysis | |||
| 304 | 2011 | Fracture mechanics study on the intermetallic compound cracks for the solder joints of electronic packages | Yi-Ming Jen ; Chiou, Y. C.; Yu, C. L. | Engineering Failure Analysis | |||
| 305 | 2011 | Self-Assembly in Micro- and Nanofluidic Devices: A Review of Recent Efforts | Khoo, H. S.; Lin, C.; Shih-Hao Huang ; Tseng, F. G. | Micromachines | 20 | ||
| 306 | 2011 | Photocatalytic effect of anodic titanium oxide nanotubes on various cell culture media | Yu, C. K.; Hu, K. H.; Tsai, H. T.; Chen, C. C.; Liu, S. M.; Tai-Yuan Lin ; Chen, C. H.; Shing-Hoa Wang ; Todd Hsu | Applied Physics a-Materials Science & Processing | |||
| 307 | 2011 | A Combined Input-state Feedback Linearization Scheme and Independent Component Analysis Filter for the Control of Chaotic Systems with Significant Measurement Noise | Chyun-Chau Fuh ; Wang, M. C. | Journal of Vibration and Control | |||
| 308 | 2011 | Wake flow behind two side-by-side square cylinders | Shun-Chang Yen ; Liu, J. H. | International Journal of Heat and Fluid Flow | |||
| 309 | 2011 | Light-directed, spatially addressable oxygen detection in a hydrogel microarray based on phase-based lifetime detection using a digital micromirror device | Shih-Hao Huang ; Tsai, C. H.; Wu, C. W.; Chang-Jer Wu | Sensors and Actuators a-Physical | 10 | ||
| 310 | 2011 | Isothermal treatment influence on nanometer-size carbide precipitation of titanium-bearing low carbon steel | Wang, T. P.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Huang, C. Y.; Chen, H. R. | Materials Letters | 38 | ||
| 311 | 2011 | MEASUREMENTS OF MICROWAVE DIELECTRIC PROPERTIES OF (1-X)TIO2-XCATIO(3) AND (1-X)TIO2-XSRTIO3 THIN FILMS BY THE CAVITY PERTURBATION METHOD | Jyh-Jong Sheen ; Li, C. Y.; Lin, S. W. | Journal of Electromagnetic Waves and Applications | |||
| 312 | 2011 | Analysis of the paracrine loop between cancer cells and fibroblasts using a microfluidic chip | Hsu, T. H.; Xiao, J. L.; Tsao, Y. W.; Kao, Y. L.; Shih-Hao Huang ; Liao, W. Y.; Lee, C. H. | Lab on a Chip | 40 | ||
| 313 | 2011 | Gradient diffusion of red blood cells in blood flow through a Y-shape microchannel | Cheng-His Chuang ; Ishikawa, T.; Numayama, K.; Imai, Y.; Yamaguchi | ||||
| 314 | 2011 | Diffusion of red blood cells from high concentration to low in a blood flow microchannel | Cheng-His Chuang ; Ishikawa, T.; Numayama, K.; Imai, Y.; Ueno, H.; Yamaguchi, T. | ||||
| 315 | 2011 | Gradient diffusion of red blood cells in a Y-shape microchannel | Cheng-His Chuang ; Ishikawa, T.; Numayama, K.; Imai, Y.; Yamaguchi, T. | ||||
| 316 | 2011 | Collective diffusion of red blood cells from high concentration to low | Chuang, C. H ; Ishikawa, T.; Numayama, K.; Imai, Y.; Ueno, H.; Yamaguchi, T. | ||||
| 317 | 2010 | Tribological properties of Cr-Si-N nanocomposite film adherent silicon under various environments | Lin, H. H.; Chau-Chang Chou ; Lee, J. W. | Thin Solid Films | |||
| 318 | 2010 | Tribological behavior of nanodiamond-dispersed lubricants on carbon steels and aluminum alloy | Chau-Chang Chou ; Lee, S. H. | Wear | |||
| 319 | 2010 | Dynamically adjustable three-dimensional gray masks operated by electrostatic force modulation for the fabrication of microlens arrays in microchannels | Shih-Hao Huang ; Yu, Z. Y.; Lin, C. K.; Hung, K. Y. | Journal of Micro-Nanolithography Mems and Moems | 3 | ||
| 320 | 2010 | Measurements of dielectric properties of TiO2 thin films at microwave frequencies using an extended cavity perturbation technique | Jyh-Jong Sheen ; Li, C. Y.; Ji, L. W.; Mao, W. L.; Liu, W. H.; Chen, C. A. | Journal of Materials Science-Materials in Electronics | |||
| 321 | 2010 | Development of an automatic arc welding system using an adaptive sliding mode control | Wu, C. Y.; Tung, P. C.; Chyun-Chau Fuh | Journal of Intelligent Manufacturing | |||
| 322 | 2010 | Molding and hot forming techniques for fabricating plastic aspheric lenses with high blue-light transmittance | Hung, K. Y.; Chen, Y. K.; Shih-Hao Huang ; Shye, D. C. | Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems | 7 | ||
| 323 | 2010 | Research on electrostatic actuator polymer thin-film for controlling light scattering phenomena | Hung, K. Y.; Chuang, Y. J.; Liao, T. H.; Shye, D. C.; Shih-Hao Huang | Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems | 0 | ||
| 324 | 2010 | Weld metal phase transformation of as welded 6Mo superaustenitic stainless steel after cross-weld fatigue | Wu, C. C.; Chen, C. Y.; Shing-Hoa Wang ; Yang, J. R.; Fang, J. | Science and Technology of Welding and Joining | 0 | ||
| 325 | 2010 | Microfluidic Systems for Biosensing | Liu, K. K.; Wu, R. G.; Chuang, Y. J.; Khoo, H. S.; Shih-Hao Huang ; Tseng, F. G. | Sensors | 71 | ||
| 326 | 2010 | Inducement of bainite and carbide transformation from retained austenite based on a high strain rate (vol 62, pg 372, 2010) | Hsu, H. C.; Lin, Y. C.; Shing-Hoa Wang ; Kao, F. H.; Lee, W. C.; Yang, J. R.; Hsu, P. W.; Yen, H. W.; Lee, W. S. | Scripta Materialia | 0 | ||
| 327 | 2010 | Bulk-metallic glasses joining in a supercooled-liquid region | Kuo, P. H.; Shing-Hoa Wang ; Liaw, P. K.; Fan, G. J.; Tsang, H. T.; Qiao, D. C.; Jiang, F. | Materials Chemistry and Physics | 19 | ||
| 328 | 2010 | Application of the endochronic theory of plasticity for life prediction with asymmetric axial cyclic straining of AISI 304 stainless steel | Yi-Ming Jen ; Chiou, Y. C. | International Journal of Fatigue | |||
| 329 | 2010 | Fractal dimension and surface topography on the diamond deposition of seeded WC-Co substrates | Chau-Chang Chou ; Lin, H. H. | Journal of Applied Physics | |||
| 330 | 2010 | Time-averaged topological flow patterns and their influence on vortex shedding of a square cylinder in crossflow at incidence | Huang, R. F.; Lin, B. H.; Shun-Chang Yen | Journal of Fluids and Structures | 47 | ||
| 331 | 2010 | Inducement of bainite and carbide transformation from retained austenite based on a high strain rate | Hsu, H. C.; Lin, Y. C.; Shing-Hoa Wang ; Kao, F. H.; Lee, W. C.; Yang, J. R.; Hsu, P. W.; Yen, H. W.; Lee, W. S. | Scripta Materialia | 3 | ||
| 332 | 2010 | Evaluation of fatigue life of adhesively bonded aluminum single-lap joints using interfacial parameters | Yi-Ming Jen ; Ko, C. W. | International Journal of Fatigue | |||
| 333 | 2010 | Configurable AC electroosmotic generated in-plane microvortices and pumping flow in microchannels | Shih-Hao Huang ; Hsueh, H. J.; Hung, K. Y. | Microfluidics and Nanofluidics | 10 | ||
| 334 | 2010 | Hydrogen absorption properties of Mg2Ni alloy with excess Mg synthesized by wet milling in toluene without annealing | Wang, H. W.; Chyou, S. D.; Shing-Hoa Wang ; Chiu, P. K.; Yen, C. C.; Chen, B. Y.; Yang, M. W.; Hwa-Chong Tien ; Nan-Nong Huang | Journal of Alloys and Compounds | |||
| 335 | 2010 | Constructing a new patent bibliometric performance measure by using modified citation rate analyses with dynamic backward citation windows | Chen, D. Z.; Chang-Pin Lin ; Huang, M. H.; Huang, C. Y. | Scientometrics | |||
| 336 | 2010 | MICROWAVE MEASUREMENTS OF DIELECTRIC CONSTANTS BY EXPONENTIAL AND LOGARITHMIC MIXTURE EQUATIONS | Jyh-Jong Sheen ; Hong, Z. W.; Su, C. W.; Chen, H. C. | Progress in Electromagnetics Research-Pier | |||
| 337 | 2010 | 漁船溫室氣體排放估算及建立清冊之研究 | 鄭元良 ; 丁培毅 | ||||
| 338 | 2010 | Generation of Tool Paths and Five-axis B-spline Curve NC Commands for Centrifugal Impeller Machining | J.S. Tsai; J. K. Ho ; K. W. Liao; C.Y. Chiu | ||||
| 339 | 2010 | A Study of the Diamond Tools for Grinding Polycrystalline Diamond | S. Y. Luo; J.K. Ho ; M. Y. Tsai; Liu, W. Chen | Advanced Materials Research | |||
| 340 | 2009 | Impact deformation behavior of duplex and superaustenitic stainless steels welds by split Hopkinson pressure bar | Shing-Hoa Wang ; Huang, C. S.; Lee, W. S.; Chen, T. H.; Wu, C. C.; Lien, C.; Tsai, H. Y. | Metals and Materials International | 2 | ||
| 341 | 2009 | Theory of plasmonic Fabry-Perot nanolasers | Chang, S. W.; Tzy-Rong Lin ; Chuang, S. L. | Optics Express | 75 | ||
| 342 | 2009 | Coating effect on optical resonance of plasmonic nanobowtie antenna | Tzy-Rong Lin ; Chang, S. W.; Chuang, S. L.; Zhang, Z. Y.; Schuck, P. J. | Applied Physics Letters | 37 | ||
| 343 | 2009 | Flow Patterns and Aerodynamic Performance of Unswept and Swept-Back Wings | Shun-Chang Yen ; Huang, L. C. | Journal of Fluids Engineering-Transactions of the Asme | 12 | ||
| 344 | 2009 | Sub-micron-structure machining on silicon by femtosecond laser | Tsai, H. Y.; Luo, S. W.; Wu, C. W.; Shing-Hoa Wang | Transactions of Nonferrous Metals Society of China | 3 | ||
| 345 | 2009 | Automated valve condition classification of a reciprocating compressor with seeded faults: experimentation and validation of classification strategy | Yih-Hwang Lin ; Liu, H. S.; Wu, C. Y. | Smart Materials and Structures | 10 | ||
| 346 | 2009 | Optimal control of chaotic systems with input saturation using an input-state linearization scheme | Chyun-Chau Fuh | Communications in Nonlinear Science and Numerical Simulation | |||
| 347 | 2009 | Effect of thickness of face sheet on the bending fatigue strength of aluminum honeycomb sandwich beams | Yi-Ming Jen ; Chang, L. Y. | Engineering Failure Analysis | |||
| 348 | 2009 | LABVIEW-BASED FUZZY CONTROLLER DESIGN OF A LIGHTING CONTROL SYSTEM | Mou-Lin Jin ; Ho, M. C. | Journal of Marine Science and Technology-Taiwan | |||
| 349 | 2009 | Amorphous phase formation in intermetallic Mg2Ni alloy synthesized by ethanol wet milling | Wang, H. W.; Chyou, S. D.; Shing-Hoa Wang ; Yang, M. W.; Hsu, C. Y.; Hwa-Chong Tien ; Nan-Nong Huang | Journal of Alloys and Compounds | |||
| 350 | 2009 | Study of dielectric constants of binary composites at microwave frequency by mixture laws derived from three basic particle shapes | Jyh-Jong Sheen ; Hong, Z. W.; Liu, W. S.; Mao, W. L.; Chen, C. A. | European Polymer Journal | |||
| 351 | 2009 | Comparisons of microwave dielectric property measurements by transmission/reflection techniques and resonance techniques | Jyh-Jong Sheen | Measurement Science and Technology | |||
| 352 | 2009 | Detecting unstable periodic orbits embedded in chaotic systems using the simplex method | Chyun-Chau Fuh | Communications in Nonlinear Science and Numerical Simulation | |||
| 353 | 2009 | Effect of the amount of adhesive on the bending fatigue strength of adhesively bonded aluminum honeycomb sandwich beams | Yi-Ming Jen ; Ko, C. W.; Lin, H. B. | International Journal of Fatigue | |||
| 354 | 2009 | Robust disturbance rejection method for uncertain system with disturbances of unknown frequencies | Chen, Y. D.; Tung, P. C.; Chyun-Chau Fuh | Nonlinear Dynamics | |||
| 355 | 2009 | Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbides | Chen, C. Y.; Yen, H. W.; Kao, F. H.; Li, W. C.; Huang, C. Y.; Yang, J. R.; Shing-Hoa Wang | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 183 | ||
| 356 | 2009 | Cross-sectional observation of the intermetallic phase in a galvannealed steel | Kao, F. H.; Li, W. C.; Chen, C. Y.; Huang, C. Y.; Yang, J. R.; Shing-Hoa Wang | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 10 | ||
| 357 | 2009 | The variation of beta phase morphology after creep and negative creep for duplex titanium alloys | Shing-Hoa Wang ; Lee, H. H.; Chen, C. Y.; Yang, J. R.; Kao, C. H. | Journal of Materials Science | 3 | ||
| 358 | 2009 | Measurements of microwave dielectric properties by an amended cavity perturbation technique | Jyh-Jong Sheen | Measurement | |||
| 359 | 2009 | 漁船溫室氣體排放長期監測及資料收集 | 鄭元良 ; 丁培毅 | ||||
| 360 | 2008 | Tribological and mechanical properties of HFCVD diamond-coated WC-Co substrates with different Cr interlayers | Chau-Chang Chou ; Lee, J. W.; Chen, Y. I. | Surface & Coatings Technology | |||
| 361 | 2008 | STUDY ON MECHANICAL PROPERTIES OF A356 ALLOYS ENHANCED WITH PREFORMED THIXOTROPIC STRUCTURE | Shuei-Wan Juang ; Wu, S. M. | Journal of Marine Science and Technology-Taiwan | |||
| 362 | 2008 | VARIABLE-THICKNESS BOUNDARY LAYERS FOR SLIDING MODE CONTROL | Chyun-Chau Fuh | Journal of Marine Science and Technology-Taiwan | |||
| 363 | 2008 | Aerodynamic characteristics and thermal structure of nonpremixed reacting swirling wakes at low Reynolds numbers | Huang, R. F.; Shun-Chang Yen | Combustion and Flame | 19 | ||
| 364 | 2008 | Synthesis of bio-functionalized copolymer particles bearing carboxyl groups via a microfluidic device | Shih-Hao Huang ; Khoo, H. S.; ChangChien, S. Y.; Tseng, F. G. | Microfluidics and Nanofluidics | 8 | ||
| 365 | 2008 | Effects of dynamic impact on mechanical properties and microstructure of special stainless steel weldments | Hsiao, W. Y.; Shing-Hoa Wang ; Chen, C. Y.; Yang, J. R.; Lee, W. S. | Materials Chemistry and Physics | 9 | ||
| 366 | 2008 | Evaluating bending fatigue strength of aluminum honeycomb sandwich beams using local parameters | Yi-Ming Jen ; Chang, L. Y. | International Journal of Fatigue | |||
| 367 | 2008 | A dielectric resonator method of measuring dielectric properties of low loss materials in the microwave region | Jyh-Jong Sheen | Measurement Science and Technology | |||
| 368 | 2008 | Rheological behavior and tribological performance of a nanodiamond-dispersed lubricant | Chau-Chang Chou ; Hsuan-Shih Lee | Journal of Materials Processing Technology | |||
| 369 | 2008 | Microstructure and magnetic variations induced by plastic deformation in Ni72Cr16Fe8 | Yao, Y. D.; Shing-Hoa Wang ; Chan, F. S.; Chen, C. Y. | Journal of Applied Physics | 1 | ||
| 370 | 2008 | Assessing the fatigue life of butt-welded joints under oblique loading by using local approaches | Yi-Ming Jen ; Chang, L. Y.; Fang, C. F. | International Journal of Fatigue | |||
| 371 | 2008 | Losses of the parallel-plate dielectric resonator | Jyh-Jong Sheen | Iet Microwaves Antennas & Propagation | |||
| 372 | 2008 | A modified field model of waveguide reflection dielectric resonator for microwave measurements of dielectric properties | Jyh-Jong Sheen | Journal of Applied Physics | |||
| 373 | 2008 | Inspecting profile errors of conjugate disk cams with coordinate measurement | Wu, L. L.; Fuh, K. H.; Chen-Chou Lin ; Wen-Tung Chang | Journal of Manufacturing Science and Engineering-Transactions of the Asme | |||
| 374 | 2008 | The use of a modified sliding-mode controller with time-delay control for unknown systems with uncertain disturbances | Chen, Y. D.; Tung, P. C.; Chyun-Chau Fuh ; Liao, C. H. | Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering | |||
| 375 | 2008 | Interactions of tandem square cylinders at low Reynolds numbers | Shun-Chang Yen ; San, K. C.; Chuang, T. H. | Experimental Thermal and Fluid Science | 61 | ||
| 376 | 2008 | Relaxing welding residual stresses by diamond like carbon coating on duplex titanium alloys | Lee, H. H.; Shing-Hoa Wang ; Shih, C. Y.; Cheng, C. M.; Hsu, H. C.; Kan, K.; Sung, C. M. | Science and Technology of Welding and Joining | 3 | ||
| 377 | 2008 | Dielectric dispersion at microwave frequencies of some low loss mixed oxide perovskites | Jyh-Jong Sheen ; Guo, R.; Bhalla, A. S.; Cross, L. E. | Ferroelectrics Letters Section | |||
| 378 | 2008 | Absolute stability analysis for a class of Takagi-Sugeno fuzzy control systems | Chyun-Chau Fuh | International Journal of Systems Science | |||
| 379 | 2008 | 漁船溫室氣體排放估算之研究 | 鄭元良 ; 丁培毅 | ||||
| 380 | 2008 | Prediction of cutting forces for face milling process and stresses estimation on cutting edge | C.R. Lin; J.S. Tsai; M.K. Dao; J. K. Ho ; C.K. Chang | ||||
| 381 | 2008 | 鑽石磨削工具製造與多晶鑽石加工之研究 | 何靖國 ; 羅勝益; 蔡哲雄 | ||||
| 382 | 2007 | Modified Smith predictor scheme for periodic disturbance reduction in linear delay systems | Chen, Y. D.; Tung, P. C.; Chyun-Chau Fuh | Journal of Process Control | |||
| 383 | 2007 | Interfacial parameter analyses for sleeve-pin-shaft connections under axial and torsional cyclic loading using the finite element method | Yi-Ming Jen ; Wei, C. L. | Journal of Strain Analysis for Engineering Design | |||
| 384 | 2007 | Combining dither smoothing technique and state feedback linearization to control undifferentiable chaotic systems | Tsai, H. H.; Chyun-Chau Fuh | Chaos Solitons & Fractals | |||
| 385 | 2007 | The influence of Sc addition on the welding microstructure of Zr-based bulk metallic glass: The stability of the amorphous phase | Shing-Hoa Wang ; Kuo, P. H.; Tsang, H. T.; Jeng, R. R.; Lin, Y. L. | Applied Physics Letters | 5 | ||
| 386 | 2007 | Microwave measurements of dielectric properties using a closed cylindrical cavity dielectric resonator | Jyh-Jong Sheen | Ieee Transactions on Dielectrics and Electrical Insulation | |||
| 387 | 2007 | PIV measurements of exit flow field of centrifugal fans with conditional sampling | Shun-Chang Yen ; Liu, J. H. | Journal of Marine Science and Technology-Taiwan | |||
| 388 | 2007 | Cyclic deformation and phase transformation of 6Mo superaustenitic stainless steel | Shing-Hoa Wang ; Wu, C. C.; Chen, C. Y.; Yang, J. R.; Chiu, P. K.; Fang, J. | Metals and Materials International | 19 | ||
| 389 | 2007 | Investigation on vortex shedding of a swept-back wing | Shun-Chang Yen ; Hsu, C. M. | Experimental Thermal and Fluid Science | |||
| 390 | 2007 | Amendment of cavity perturbation technique for loss tangent measurement at microwave frequencies | Jyh-Jong Sheen | Journal of Applied Physics | |||
| 391 | 2007 | An experimental study on active micro-vibration suppression of a flexible beam mounted on an elastic base | Chu, C. L.; Wu, B. S.; Yih-Hwang Lin | Measurement Science and Technology | 2 | ||
| 392 | 2007 | Influence of boundary layer behavior on aerodynamic coefficients of a swept-back wing | Shun-Chang Yen ; Hsu, C. M. | Journal of Fluids Engineering-Transactions of the Asme | |||
| 393 | 2007 | Prediction of low-cycle contact fatigue life of sleeve-pin-shaft connections under axial and torsional cyclic loading | Yi-Ming Jen ; Yip, M. C.; Wei, C. L.; Shu, G. C. | International Journal of Fatigue | |||
| 394 | 2007 | Inverse effect of strain rate on mechanical behavior and phase transformation of superaustenitic stainless steel | Wu, C. C.; Shing-Hoa Wang ; Chen, C. Y.; Yang, J. R.; Chiu, P. K.; Fang, J. | Scripta Materialia | 38 | ||
| 395 | 2007 | Bending embrittlement of as-wellded FeAl alloys | Chiang, C. C.; Shing-Hoa Wang ; Chen, J. S.; Chu, J. P.; Hsu, Y. F. | Intermetallics | 7 | ||
| 396 | 2007 | Adaptive parameter identification of servo control systems with noise and high-frequency uncertainties | Chyun-Chau Fuh ; Tsai, H. H. | Mechanical Systems and Signal Processing | |||
| 397 | 2007 | Transient three-dimensional analysis of gas tungsten arc welding plates | Yeh, R. H.; Shih-Pin Liaw ; Tu, Y. P. | Numerical Heat Transfer Part a-Applications | 13 | ||
| 398 | 2007 | Robust modal vibration suppression of a flexible rotor | Yu, H. C.; Yih-Hwang Lin ; Chu, C. L. | Mechanical Systems and Signal Processing | 18 | ||
| 399 | 2007 | Flow patterns and wake structure of a swept-back wing | Shun-Chang Yen ; Hsu, C. M. | Aiaa Journal | |||
| 400 | 2007 | 漁船溫室氣體估算模式、清冊建立及估算系統建構之研究 | 鄭元良 ; 丁培毅 | ||||
| 401 | 2006 | Effect of size of lid-substrate adhesive on reliability of solder balls in thermally enhanced flip chip PBGA packages | Yi-Ming Jen ; Fang, C. K.; Yeh, Y. H. | Ieee Transactions on Components and Packaging Technologies | |||
| 402 | 2006 | Automated condition classification of a reciprocating compressor using time-frequency analysis and an artificial neural network | Yih-Hwang Lin ; Wu, H. C.; Wu, C. Y. | Smart Materials and Structures | 18 | ||
| 403 | 2006 | Active vibration control of a flexible beam mounted on an elastic base | Chu, C. L.; Wu, B. S.; Yih-Hwang Lin | Finite Elements in Analysis and Design | 6 | ||
| 404 | 2006 | Low-temperature electrical resistivity study of deformed Inconel alloy 600 | Chan, F. S.; Yao, Y. D.; Shing-Hoa Wang | Journal of Magnetism and Magnetic Materials | 2 | ||
| 405 | 2006 | The effect of strain ratio on morphology of dislocation in low cycle fatigued SAF 2205 DSS | Chiu, P. K.; Shing-Hoa Wang ; Yang, J. R.; Weng, K. L.; Fang, J. | Materials Chemistry and Physics | 19 | ||
| 406 | 2006 | Gamma (gamma) phase transformation in pulsed GTAW weld metal of duplex stainless steel | Shing-Hoa Wang ; Chiu, P. K.; Yang, J. R.; Fang, J. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 38 | ||
| 407 | 2006 | Comparison of strain ratio effect on cyclic plastic deformation for special stainless steels | Huang, C. S.; Shing-Hoa Wang ; Wu, C. C.; Huang, Y. S.; Fang, J. | Scripta Materialia | 10 | ||
| 408 | 2006 | Exit flow field and performance of axial flow fans | Shun-Chang Yen ; Lin, F. K. T. | Journal of Fluids Engineering-Transactions of the Asme | |||
| 409 | 2006 | Impact of the number of chips on the reliability of the solder balls for wire-bonded stacked-chip ball grid array packages | Yi-Ming Jen ; Wu, Y. L.; Fang, C. K. | Microelectronics Reliability | |||
| 410 | 2006 | Effect of lid materials on the solder ball reliability of thermally enhanced flip-chip plastic ball grid array packages | Yi-Ming Jen ; Chien, H. H.; Lin, T. S.; Huang, S. H. | Fracture and Strength of Solids Vi, Pts 1 and 2 | |||
| 411 | 2006 | 鑽石磨棒磨削多晶鑽石加工之研究 | 羅勝益; 何靖國 ; 余宗翰; 林信憲 | ||||
| 412 | 2005 | Strain-induced electrical resistivity and magnetic behavior of paramagnetic Inconel alloy 600 | Shing-Hoa Wang ; Chan, F. S.; Yao, Y. D. | Japanese Journal of Applied Physics Part 1-Regular Papers Brief Communications & Review Papers | 2 | ||
| 413 | 2005 | A simple design of fins for boiling heat transfer | Shih-Pin Liaw ; Yeh, R. H.; Yeh, W. T. | International Journal of Heat and Mass Transfer | 7 | ||
| 414 | 2005 | Low-cycle fatigue-induced martensitic transformation in SAF 2205 duplex stainless steel | Chiu, P. K.; Weng, K. L.; Shing-Hoa Wang ; Yang, J. R.; Huang, Y. S.; Fang, J. S. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 34 | ||
| 415 | 2005 | Dynamic impact behavior and ferrite variation of special stainless steels | Huang, C. S.; Shing-Hoa Wang ; Lee, W. S.; Chen, T. H.; Lien, C. | Scripta Materialia | 15 | ||
| 416 | 2005 | Crack initiation life prediction for solid cylinders with transverse circular holes under in-phase and out-of-phase multiaxial loading | Yi-Ming Jen ; Wang, W. W. | International Journal of Fatigue | |||
| 417 | 2005 | Stabilizing unstable periodic orbits via universal input-output delayed-feedback control | Chyun-Chau Fuh ; Tsai, H. H.; Tung, P. C. | Nonlinear Dynamics | 1 | ||
| 418 | 2005 | Study of microwave dielectric properties measurements by various resonance techniques | Jyh-Jong Sheen | Measurement | |||
| 419 | 2005 | Application of voice coil motors in active dynamic vibration absorbers | Chen, Y. D.; Chyun-Chau Fuh ; Tung, P. C. | Ieee Transactions on Magnetics | 86 | ||
| 420 | 2004 | Active modal control of a flexible rotor | Yih-Hwang Lin ; Yu, H. C. | Mechanical Systems and Signal Processing | 7 | ||
| 421 | 2004 | 遠端操控水下機械臂系統應用於水下施工作業之技術研發 | 張忠誠 ; 林鎮洲 ; 王榮華 ; 鄭慕德 | 工程科技通訊 | |||
| 422 | 2004 | Optimal modal vibration suppression of a fluid-conveying pipe with a divergent mode | Yih-Hwang Lin ; Huang, R. C.; Chu, C. L. | Journal of Sound and Vibration | 12 | ||
| 423 | 2004 | Tensile properties of gas tungsten arc weldments in commercially pure titanium, Ti-6Al-4V and Ti-15V-3Al-3Sn-3Cr alloys at different strain rates | Shing-Hoa Wang ; Wei, M. D. | Science and Technology of Welding and Joining | 19 | ||
| 424 | 2004 | 人機介面監控之防止海生物成長系統之開發 | 莊水旺 ; 潘榮進 | ||||
| 425 | 2004 | 以TRIZ方法開發新型漁艙口蓋之研究 | 莊水旺 ; 蔡恒光 | ||||
| 426 | 2003 | Mathematical model for prediction of intermittent drying and pressing process of mullet roe | Fan, C. C.; Shih-Pin Liaw ; Fu, W. R.; Pan, B. S. | Journal of Food Science | 2 | ||
| 427 | 2003 | Effect of initial microstructure on the creep behavior of TMCP EH36 and SM490C steels | Shing-Hoa Wang ; Chiang, C. C.; Chan, S. L. I. | Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing | 16 | ||
| 428 | 2003 | Hydrogen permeation in a submerged arc weldment of TMCP steel | Shing-Hoa Wang ; Luu, W. C.; Ho, K. F.; Wu, J. K. | Materials Chemistry and Physics | 48 | ||
| 429 | 2003 | 表面聲波生物感測器之製作與應用 | 沈志忠 ; 楊啟榮; 林易賞 | ||||
| 430 | 2003 | 蒸發管結霜之研究 | 黃棋模; 黃國峰; 葉榮華; 廖世平 | ||||
| 431 | 2002 | The response surface method and the analysis of mild oxidational wear | Lin, J. F.; Chau-Chang Chou | Tribology International | |||
| 432 | 2002 | Effect of microstructural texture on the creep behavior | Shing-Hoa Wang ; Chiang, C. C.; Chan, S. L. I. | Journal of Materials Science | |||
| 433 | 2002 | A robust controller for chaotic systems under external excitation | Tsai, H. H.; Chyun-Chau Fuh ; Chang, C. N. | Chaos Solitons & Fractals | 51 | ||
| 434 | 2002 | A new approach to the effect of EP additive and surface roughness on the pitting fatigue of a line-contact system | Chau-Chang Chou ; Lin, J. F. | Journal of Tribology-Transactions of the Asme | |||
| 435 | 2002 | Control of discrete-time chaotic systems via feedback linearization | Chyun-Chau Fuh ; Tsai, H. H. | Chaos Solitons & Fractals | 33 | ||
| 436 | 2002 | 過冷溫度對冷凍性能的影響 | 黃棋模; 鄭羽志; 葉榮華; 廖世平 | ||||
| 437 | 2001 | Development of an intelligent underwater robotic manipulator system | Chen-Chou Lin ; Chung-Cheng Chang ; Mu-Der Jeng ; Jung-Hua Wang | 0 | |||
| 438 | 2001 | Optimal weight design of rotor systems with oil-film bearings subjected to frequency constraints | Yih-Hwang Lin ; Lin, S. C. | Finite Elements in Analysis and Design | 17 | ||
| 439 | 2001 | The effects of strain hardened layer on pitting formation during rolling contact | Chue, C. H.; Chung, H. H.; Lin, J. F.; Chau-Chang Chou | Wear | |||
| 440 | 2001 | Active modal control of Timoshenko pipes conveying fluid | Yih-Hwang Lin ; Chu, C. L. | Journal of the Chinese Institute of Engineers | 7 | ||
| 441 | 2001 | 用應變規量測主機馬力與主軸扭轉振動之研究 | 洪瑞鴻; 林益煌 ; 吳忠恕 | ||||
| 442 | 2001 | 電腦用微熱管之分析與實驗 | 吳聲麟; 田華忠 | ||||
| 443 | 2001 | 小型船用柴油機排氣流量與溫度之理論預測 | 蕭志豪; 葉榮華; 廖世平 | ||||
| 444 | 2001 | 智慧型水下機械臂系統技術研習與實作 | 張忠誠 ; 鄭慕德 ; 王榮華 ; 林鎮洲 ; 曾世和 | 工程科技通訊 | |||
| 445 | 2000 | The fabrication and characterization of PZT thin film Acoustic Devices for application in underwater robotic systems | Chung-Cheng Chang ; Jung-Hua Wang ; Mu-Der Jeng ; Chen-Chou Lin ; Chen, Kau-hsiung | Proceedings of the National Science Council : Part A, Physical Science and Engineering | |||
| 446 | 1999 | Models for temperature-kinetic aspect of friction and wear in oil lubrication | Lin, J. F.; Chau-Chang Chou ; Chen, S. T. | Journal of Tribology-Transactions of the Asme | |||
| 447 | 1999 | Nonlinear optimal vibration suppression of Timoshenko beams traversed by a moving mass | Yih-Hwang Lin ; Huang, J. R. | Journal of the Chinese Institute of Engineers | 0 | ||
| 448 | 1999 | Solidification of a liquid metal with natural convection in a thick-walled container | Hwa-Chong Tien ; Wang, C. C. | Chinese Journal of Mechanics-Series A | |||
| 449 | 1999 | A strong fractional cutting-plane algorithm for resource-constrained project scheduling | Sankaran, J. K.; Bricker, D. L.; Shuei-Wan Juang | International Journal of Industrial Engineering-Theory Applications and Practice | |||
| 450 | 1999 | Computation of boiling water on circular finned tubes | Fan, C. C.; Shih-Pin Liaw | International Communications in Heat and Mass Transfer | 4 | ||
| 451 | 1999 | Application of the response surface method to the tribological analysis of a medium-carbon steel under mild-oxidational wear | Chau-Chang Chou ; Lin, J. F. | Journal of Tribology-Transactions of the Asme | |||
| 452 | 1999 | Residual stress and its effect on corrosion behaviour of butt jointed Cu-Al alloys | Shing-Hoa Wang ; Shan, S. H.; Pan, Y. C. | Science and Technology of Welding and Joining | |||
| 453 | 1999 | Creep deflection of viscoelastic laminated cylindrical panels with initial deflection under axial compression | Nan-Nong Huang | Composites Part B-Engineering | |||
| 454 | 1999 | 船用低壓三效淡水機之簡易熱設計 | 陳興財; 葉榮華; 廖世平 | ||||
| 455 | 1998 | Viscoelastic analysis of creep response for uniaxially-compressed laminates with initial deflection including the effect of physical aging | Nan-Nong Huang | International Journal of Solids and Structures | |||
| 456 | 1998 | The effect of physical aging on the viscoelastic response of cross-ply laminates to in-plane compression | Nan-Nong Huang ; Chen, H. J.; Lee, C. F. | Journal of the Chinese Institute of Engineers | |||
| 457 | 1998 | Evaluation of cumulative fatigue lives under different biaxial loading mode sequences for notched specimens | Yip, M. C.; Yi-Ming Jen | Fracture and Strength of Solids, Pts 1 and 2: Pt 1: Fracture Mechanics of Materials; Pt 2: Behavior of Materials and Structure | |||
| 458 | 1998 | EH36 TMCP鋼材銲件機械性質之研究 | 莊水旺 ; 陳燦錫 | ||||
| 459 | 1998 | 智慧型水下機械臂之研究 | 王榮華 ; 鄭慕德 ; 林鎮洲 ; 張恆毅; 張忠誠 | ||||
| 460 | 1997 | Viscoelastic analysis of von Karman laminated plates under in-plane compression with initial deflection | Nan-Nong Huang | International Journal of Non-Linear Mechanics | |||
| 461 | 1997 | Nonlinear vibrations of Timoshenko pipes conveying fluid | Yih-Hwang Lin ; Tsai, Y. K. | International Journal of Solids and Structures | 39 | ||
| 462 | 1997 | Adaptive modal vibration control of a fluid-conveying cantilever pipe | Tsai, Y. K.; Yih-Hwang Lin | Journal of Fluids and Structures | 23 | ||
| 463 | 1997 | Thermoviscoelastic response of fiber-reinforced-plastic laminates with initial deflection imperfection | Nan-Nong Huang | Journal of Thermal Stresses | |||
| 464 | 1997 | Performance of a regulator design for vibration control of beams subjected to multiple moving loads | Yih-Hwang Lin ; Cho, C. H. | Journal of the Chinese Institute of Engineers | 2 | ||
| 465 | 1997 | Non-linear active vibration control of a cantilever pipe conveying fluid | Yih-Hwang Lin ; Tsai, Y. K. | Journal of Sound and Vibration | 12 | ||
| 466 | 1997 | Dynamic behavior of beams and rectangular plates under moving loads - Comment | Yih-Hwang Lin | Journal of Sound and Vibration | 9 | ||
| 467 | 1997 | Mean strain effect on crack initiation lives for notched specimens under biaxial nonproportional loading paths | Yip, M. C.; Yi-Ming Jen | Journal of Engineering Materials and Technology-Transactions of the Asme | |||
| 468 | 1997 | Vibration analysis of beams traversed by uniform partially distributed moving masses - Comment | Yih-Hwang Lin | Journal of Sound and Vibration | 14 | ||
| 469 | 1997 | Tribological effects of roughness and running-in on oil-lubricated line contacts | Chau-Chang Chou ; Lin, J. F. | Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology | |||
| 470 | 1997 | Optimal vibration suppression in modal space for flexible beams subjected to moving loads | Yih-Hwang Lin | Shock and Vibration | 2 | ||
| 471 | 1996 | Active flutter control of a cantilever tube conveying fluid using piezoelectric actuators | Yih-Hwang Lin ; Chu, C. L. | Journal of Sound and Vibration | 27 | ||
| 472 | 1996 | Biaxial fatigue crack initiation life prediction of solid cylindrical specimens with transverse circular holes | Yip, M. C.; Yi-Ming Jen | International Journal of Fatigue | |||
| 473 | 1996 | Discretization considerations in moving load finite element beam models | Rieker, J. R.; Yih-Hwang Lin ; Trethewey, M. W. | Finite Elements in Analysis and Design | 55 | ||
| 474 | 1996 | Influences of Fuel Sulfur Content on Diesel Engine Emission Characteristics Under Varying Temperature and Humidity of Inlet Air, | Cherng–Yuan Lin ; Yuan-Liang Jeng ; Chu-Sheng Wu; Kuo-Jenn Wu | ||||
| 475 | 1995 | NOTCH EFFECT ON 2-LEVEL CUMULATIVE LOW-CYCLE FATIGUE LIFE UNDER DIFFERENT BIAXIAL LOADING MODE SEQUENCES | Yip, M. C.; Yi-Ming Jen | Fatigue & Fracture of Engineering Materials & Structures | |||
| 476 | 1995 | SIMULATION, ANIMATION, AND ANALYSIS OF DESIGN DISASSEMBLY FOR MAINTAINABILITY ANALYSIS | Vujosevic, R.; Raskar, R.; Yetukuri, N. V.; Jothishankar, M. C.; Shuei-Wan Juang | International Journal of Production Research | |||
| 477 | 1995 | NUMERICAL EVALUATION FOR STABILITY AND PERFORMANCE OF AN ELECTRONIC DAMPING DEVICE FOR STRUCTURAL VIBRATION CONTROL | Yih-Hwang Lin ; Chu, C. L. | Journal of Sound and Vibration | 3 | ||
| 478 | 1995 | DYNAMIC-RESPONSE OF A BEAM WITH INTERMEDIATE POINT CONSTRAINTS SUBJECT TO A MOVING LOAD - COMMENT | Yih-Hwang Lin | Journal of Sound and Vibration | 3 | ||
| 479 | 1995 | A NEW DESIGN FOR INDEPENDENT MODAL SPACE CONTROL OF GENERAL DYNAMIC-SYSTEMS | Yih-Hwang Lin ; Chu, C. L. | Journal of Sound and Vibration | 18 | ||
| 480 | 1995 | STRONTIUM ALUMINUM TANTALUM OXIDE AND STRONTIUM ALUMINUM NIOBIUM OXIDE AS POTENTIAL SUBSTRATES FOR HTSC THIN-FILMS | Guo, R. Y.; Bhalla, A. S.; Jyh-Jong Sheen ; Ainger, F. W.; Erdei, S.; Subbarao, E. C.; Cross, L. E. | Journal of Materials Research | |||
| 481 | 1995 | FINITE-ELEMENT ANALYSIS OF FLUID-CONVEYING TIMOSHENKO PIPES | Chu, C. L.; Yih-Hwang Lin | Shock and Vibration | 10 | ||
| 482 | 1995 | EXACT ANALYSIS FOR 3-DIMENSIONAL FREE-VIBRATIONS OF CROSS-PLY CYLINDRICAL AND DOUBLY-CURVED LAMINATES | Nan-Nong Huang | Acta Mechanica | |||
| 483 | 1994 | 船速與船舶軌跡量測之即時差分式全球衛星定位系統 | 柯永澤; 李台生; 楊國誠 ; 李耀輝 ; 高聖龍 | 中國造船暨輪機工程學刊 |
