Results 1-473 of 473 (Search time: 0.024 seconds).

Issue DateTitleAuthor(s)SourceWOSFulltext/Archive link
12024/9/30Measurement of stress characteristics in flexible multi-thin-film substrates using tomography common optical path interferometryWen, Bor-Jiunn ; Lee, Che-YuMEASUREMENT
22024/8/1Multi-Physics Simulation and Optimization of Jet Electrodeposition for Ni-Diamond Composite CoatingsWang, Xiaoli; Chou, Chau-Chang ; Zhou, Xin; Bao, Xin; Zhang, QianMETALS
32024/7/1Toward Improved Load Forecasting in Smart Grids: A Robust Deep Ensemble Learning FrameworkSu, Heng-Yi ; Lai, Chia-ChingIEEE TRANSACTIONS ON SMART GRID
42024/6/1Applicability of Variable-Geometry Turbocharger for Diesel Generators under High Exhaust Back PressureChen, Chien-Cheng; Jeng, Yuan-Liang ; Yen, Shun-Chang JOURNAL OF MARINE SCIENCE AND ENGINEERING
52024/5/30Influence of coating microstructure on the corrosion behavior of Inconel 625 coatings fabricated by different thermal spraying processesChen, Tai-Cheng; Chou, Chau-Chang ; Lin, Hwai-En; Yung, Tung -Yuan; Yang, Chang -Ting; Tsai, Ya-WenSURFACE & COATINGS TECHNOLOGY
62024/5/30Investigating the corrosion resistance of Zn and Al coating deposited by arc thermal spraying processChen, Tai-Cheng; Yung, Tung-Yuan; Chou, Chau-Chang ; Wang, Yao-MingSURFACE & COATINGS TECHNOLOGY
72024/4/1Characteristics of negative creep aging and its microstructure-oriented tensile behaviorHsu, Cheng -An; Gan, Neng-Hao; Chang, Hong -Yi; Wang, Shing-Hoa ; Tsao, Tzu-Ching; Yang, Jer-Ren; Chiu, Po -Han; Zheng, Xue-Qian; Lee, Yuan-TzuMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
82024/3/23Effect of MoN on the structure and characteristics of MoN/ZrMoN bi-layer nitride filmsHu, Ding-Chiang; Kuo, Dong-Hau; Tsao, Chung-Chen; Ho, Jihng-Kuo ; Kuo, Chin-Guo; Hsu, Chun-YaoBULLETIN OF MATERIALS SCIENCE
92024/3/1Dynamic-Deep-Ensemble-Learning Scheme for Probabilistic Voltage Stability Margin Estimation to Enhance Resilient Power Grid MonitoringSu, Heng-Yi ; Lai, Chia-ChingIEEE TRANSACTIONS ON INDUSTRY APPLICATIONS
102024/12/1Modeling and performance estimation for L-shaped OWC wave energy converters with a theoretical correction for spring-like air compressibilityNguyen, Duy Tong; Chow, Yi-Chih ; Lin, Chen-Chou RENEWABLE ENERGY
112024/10/5GAIT PATTERN INVESTIGATIONS OF BIONIC PIEZOELECTRIC ROBOTLin, Yu-Chih ; Lin, Xiu-XianJOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY
122024/10/16Motion analysis of an undulatory fin underwater robotLin, Yu-Chih ; Chung, Yu-Chen; Lin, Chien-Tzu; Wang, Bo-ShengJOURNAL OF MECHANICS
132024/1/1An Innovative Tubular Thermoelectric Generator (TTEG) for Enhanced Waste Heat Recovery in Industrial and Automotive ApplicationsDu, Kung-Wen; Wu, Chun-, I ; Papadakis, GeorgiosAPPLIED SCIENCES-BASEL
142024/1/1Advancements in Thermoelectric Generator Design: Exploring Heat Exchanger Efficiency and Material PropertiesChen, Cheng-You; Du, Kung-Wen; Chung, Yi-Cheng; Wu, Chun-, I ENERGIES
152024/1/1Enhancing Ocean Thermal Energy Conversion Performance: Optimized Thermoelectric Generator-Integrated Heat Exchangers with Longitudinal Vortex GeneratorsChung, Yi-Cheng; Wu, Chun-, I ENERGIES
162024/1/1Applicability of Reducing Valve Timing Overlap for Diesel Engines Under High Exhaust Back PressureChen, Chien-Cheng; Jeng, Yuan-Liang ; Yen, Shun -ChangJOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN
172024Efficiency Enhancement in Ocean Thermal Energy Conversion: A Comparative Study of Heat Exchanger Designs for Bi<sub>2</sub>Te<sub>3</sub>-Based Thermoelectric GeneratorsChung, Yi-Cheng; Wu, Chun-, I MATERIALS
182023/12/19Economical preparation and characterization of dual-ion conducting fuel cellLu, Yu-Tse; Huang, Wei-Cheng; Wang, Shing-Hoa ; Chen, Tai-Cheng; Chang, Horng-Yi INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
192023/11/14Innovation in thermal cycling aging compared to isothermal aging for precipitation hardening stainless steelHsu, Cheng-An; Chiu, Po-Han; Chang, Hong-Yi; Wang, Shing-Hoa ; Tsao, Tzu-Ching; Yang, Jer-Ren; Lee, Yuan-TzuJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
202023/11/11Crystallization and activator reduction simultaneously for calcium sulfide nanophosphors and evaluation of red-light compensation - Environmental reliabilityWu, Chen-Yu; Lei, Chien-Ming; Wu, Rudder T.; Wang, Shing-Hoa ; Shih, Jing-Shiang; Chang, Horng-Yi OPTICAL MATERIALS
212023Night-Time Measurement and Skeleton Recognition Using Unmanned Aerial Vehicles Equipped With LiDAR Sensors Based on Deep-Learning AlgorithmsWen, Bor-Jiunn ; Chen, Yan-HongIEEE SENSORS JOURNAL
222023以BOPPPS架構結合人工智慧及工業4.0之創新教學實踐蘇恆毅 
232023將問題導向學習與科際整合教學應用於生醫機械跨領域課程之學習動機與成效探討--從機械外骨骼設計問題開始林育志 
242023以機構模型設計實作之專題導向式學習強化「機動學」與「機械設計」課程之垂直銜接與學習成效張文桐 
252023以演繹說明式概念教學法輔助跨領域課程生物流體力學概論,再搭配問題解決教學法提升學生好奇心。莊程媐 
262023虛實整合-翻轉教學融入分組教學改善熱傳學學習成效吳俊毅 
272022Ultrathin arch-like labyrinthine acoustic metasurface for low-frequency sound absorptionChen, Jung -San; Chung, Yu-Ting; Wang, Cheng-Yi; Liu, Chien-Hao; Yu, Chi-Hua; Chang, I-Ling ; Lin, Tzy-Rong APPLIED ACOUSTICS
282022Automatic Fruit Harvesting Device Based on Visual Feedback ControlWen, Bor-Jiunn ; Yeh, Che-ChihAGRICULTURE-BASEL1
292022Effect of Cu Additions on the Evolution of Eta-prime Precipitates in Aged AA 7075 Al-Zn-Mg-Cu AlloysHsiao, Ting-Jung; Chiu, Po-Han; Tai, Cheng-Lin; Tsao, Tzu-Ching; Tseng, Chien-Yu; Lin, Yi-Xian; Chen, Hsueh-Ren; Chung, Tsai-Fu; Chen, Chih-Yuan; Wang, Shing-Hoa ; Yang, Jer-RenMETALS0
302022Welded microstructure and orientation variation of duplex Ti alloy through electrodynamic vibrationLiu, Chia-Heng; Kuo, Chen-Kuan; Wang, Shing-Hoa ; Yang, Yo-Lun; Chang, Horng-Yi ; Chiu, Po -KaiJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T0
312022Investigation of Strain-Induced Precipitation of Niobium Carbide in Niobium Micro-Alloyed Steels at Elevated TemperaturesTsao, Tzu-Ching; Chiu, Po-Han; Tseng, Chien-Yu; Tai, Cheng-Lin; Chen, Hsueh-Ren; Chung, Tsai-Fu; Chen, Chih-Yuan; Wang, Shing-Hoa ; Tsai, Yu-Ting; Yang, Jer-RenMETALS0
322022Effect of Natural Ageing on Subsequent Artificial Ageing of AA7075 Aluminum AlloyTai, Cheng-Ling; Tai, Po-Jui; Hsiao, Ting-Jung; Chiu, Po-Han; Tseng, Chien-Yu; Tsao, Tzu-Ching; Chung, Tsai-Fu; Yang, Yo-Lun; Chen, Chih-Yuan; Wang, Shing-Hoa ; Yang, Jer-RenMETALS1
332022STEM科際整合工程數學教學林育志 
342022用AI讓機械活起來蘇恆毅 
352022Design of disk cam mechanisms with a translating follower having symmetrical double-concave facesChuang, Yu-Hsuan; Hsu, Kuan-Lun; Chang, Wen-Tung JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY0
362022Experimental and numerical investigations on undulatory motion of a soft-fin-based underwater robotLin, Yu-Chih ; Zhang, Dai-NongJOURNAL OF MECHANICS0
372022Dynamic-Error-Compensation-Assisted Deep Learning Framework for Solar Power ForecastingSu, Heng-Yi ; Tang, ChenIEEE T SUSTAIN ENERG2
382022Nonscattering Photodetection in the Propagation of Unidirectional Surface Plasmon Polaritons Embedded with GrapheneWu, Chia-Hung; Ku, Chih-Jen; Yu, Min-Wen; Yang, Jhen-Hong; Lu, Tien-Chang; Lin, Tzy-Rong ; Yang, Chan-Shan; Chen, Kuo-PingACS APPLIED MATERIALS & INTERFACES2
392022Magnus-Forces Analysis of Pitched-Baseball Trajectories Using YOLOv3-Tiny Deep Learning AlgorithmWen, Bor-Jiunn ; Chang, Che-Rui; Lan, Chun-Wei; Zheng, Yi-ChenAPPLIED SCIENCES-BASEL3
402022An improved design for rotating balance of assembled type conjugate disk camsChang, Wen-Tung ; Hu, Yu-En; Chang, Wei-ChienMECHANISM AND MACHINE THEORY1
412022Evaluation of Transparent ITO/Nano-Ag/ITO Electrode Grown on Flexible Electrochromic Devices by Roll-to-Roll Sputtering TechnologyCheng, Yuang-Tung; Lu, Tsung-Lin; Hong, Min-Han; Ho, Jyh-Jier ; Chou, Chau-Chang ; Ho, Jiajer; Hsieh, Tung-PoCOATINGS3
422022Verification of the ability of Cu to dissolve in BCC delta in a delta-gamma Solid Solution above 1200 degrees C and boosting delta nano-hardness in Cu-containing PHSSGan, Neng-Hao; Sun, Yi-Hsuan; Tsao, Tzu-Ching; Li, Chia-Lin; Liu, Jia-Heng; Yen, Hung-Wei; Hsueh, Chun-Hway; Yang, Jer-Ren; Wang, Shing-Hoa ; Yeh, Jien-Wei; Chang, Horng-Yi ; Hou, Wen-HsingSCRIPTA MATERIALIA2
432022Influence of Different Addition Ratios of Fly Ash on Mechanical Properties of ADC10 Aluminum Matrix CompositesJuang, Shueiwan Henry ; Li, Ching-FengMETALS-BASEL0
442022Crystalline characteristics of a dual-phase precipitation hardening stainless steel in quenched solid solution and aging treatmentsYu, Ping-Jui; Huang, Cheng-Yao; Lin, Yi-Ting; Su, Yu-Cheng; Yen, Hung-Wei; Hsu, Cheng-An; Wang, Shing-Hoa ; Yeh, Jien-Wei; Hou, Wen-Hsing; Lin, Tzy-Rong ; Hsu, Tai-Wen MATERIALS CHEMISTRY AND PHYSICS1
452022Hierarchical nanotwins in Fe27Co24Ni23Cr26 high-entropy alloy subjected to high strain-rate Hopkinson bar deformationChung, Tsai-Fu; Lu, Shih-Yuan; Lin, Yo-Shiuan; Li, You-Lin; Chiu, Po-Han; Hsiao, Chien-Nan; Chen, Chih-Yuan; Kuo, Chin-Lung; Yeh, Jien-Wei; Wang, Shing-Hoa ; Lee, Woei-Shyan; Yang, Jer-RenMATERIALS CHARACTERIZATION2
462022Effect of Dispersing Multiwalled Carbon Nanotubes and Graphene Nanoplatelets Hybrids in the Matrix on the Flexural Fatigue Properties of Carbon/Epoxy CompositesJen, Yi-Ming ; Ni, Wei-LunPOLYMERS1
472022Uniform Torsion Analysis of Composite Shafts Using Point Collocation Method Based on Pascal PolynomialsChang, Chih-Wen; Wu, Jyh-Hong; Lin, Ying-Ru; Lin, Yu-Feng; Huang, Nan-Nong J MAR SCI TECH-JAPAN0
482022Theoretical analysis by Mindlin theory and experimental measurements of the piezoceramic circular bimorphs in resonanceHuang, Yu-Hsi; Lin, Yu-Chih ; Huang, Chi-Hung; Li, Cheng-Chi; Ma, Chien-ChingINTERNATIONAL JOURNAL OF MECHANICAL SCIENCES2
492022Performance of High Efficiency Avalanche Poly-SiGe Devices for Photo-Sensing ApplicationsCheng, Yuang-Tung; Lu, Tsung-Lin; Wang, Shang-Husuan; Ho, Jyh-Jier ; Chang, Chung-Cheng ; Chou, Chau-Chang ; Ho, JiashowSENSORS1
502022Controller Design for Unstable Time-Delay Systems with Unknown Transfer FunctionsTsai, Hsun-Heng; Fuh, Chyun-Chau ; Ho, Jeng-Rong; Lin, Chih-Kuang; Tung, Pi-ChengMATHEMATICS1
512022Development of surface plasmon polariton-based nanolasersLi, Heng; Huang, Zhen-Ting; Hong, Kuo-Bin; Yu, Min-Wen; Wu, Chia-Hung; Yang, Chan-Shan; Lin, Tzy-Rong ; Chen, Kuo-Ping; Lu, Tien-ChangJOURNAL OF APPLIED PHYSICS0
522022Strengthening mechanisms and microstructural evolution of ductile refractory medium-entropy alloy Hf20Nb10Ti35Zr35Su, I-An; Tseng, Ko-Kai; Yeh, Jien-Wei; El-Sayed, Badr; Liu, Chia-Heng; Wang, Shing-Hoa SCRIPTA MATERIALIA22
532022Thermomechanical Property Measurement of Flexible Transparent Conductive-Film Substrates Based on Whole Folding Test by Reflective- Type Common-Path Liquid-Crystal Modulating InterferometryWen, Bor-Jiunn ; Hsu, Jui-JenIEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT0
542022Vibration characteristics of hybrid functionally graded porous platesJihng-Kuo Ho ; Yi-Feng Huang; Yu-Chin Chiang; Chun-Sheng Chen
552022Instability of hybrid functionally graded porous plateJihng-Kuo Ho ; Ching-Rung Chu; Wei-Zhou Jian; Chun-Sheng Chen
562021Improvement in Tensile Quasi-Static and Fatigue Properties of Carbon Fiber-Reinforced Epoxy Laminates with Matrices Modified by Carbon Nanotubes and Graphene Nanoplatelets Hybrid NanofillersJen, Yi-Ming ; Huang, Yu-ChingNANOMATERIALS5
572021Different Involvement of Band 3 in Red Cell Deformability and Osmotic Fragility-A Comparative GP.Mur Erythrocyte StudyKuo, Mei-Shin; Chuang, Cheng-Hsi ; Cheng, Han-Chih; Lin, Hui-Ru; Wang, Jong-Shyan; Hsu, KateCELLS-BASEL5
582021High-Efficiency Ultrathin Si-Based Solar Cells by Cascading Dilute-Nitride GaNAsPLin, Yen-Ju; Feng, David Jui-Yang; Lin, Tzy-Rong MATERIALS0
592021Microstructural variation in fatigued interphase arrayed nano-precipitated Ti-microalloyed steelYen, Chieh-Ning; Chang, Liu-Wen; Hsu, Chen-An; Yang, Jer-Ren; Chang, Horng-Yi ; Wang, Shing-Hoa ; Chen, Hsueh-RenJOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T1
602021Hybrid Graphene-Based Photonic-Plasmonic Biochemical Sensor with a Photonic and Acoustic Cavity StructureYang, Chan-Shan; Cheng, Yi-Sheng; Hsu, Young-Chou; Chung, Yi-Cheng; Hung, Jing-Ting; Liu, Chien-Hao; Hsu, Jin-Chen; Cheng-Ying Chen ; Yang, Chii-Rong; Li, Yu-Tai; Huang, Nan-Nong ; Lin, Tzy-Rong CRYSTALS1
612021Applying Artificial Intelligence (AI) Techniques to Implement a Practical Smart Cage Aquaculture Management SystemChang, Chung-Cheng ; Wang, Jung-Hua ; Wu, Jenq-Lang ; Hsieh, Yi-Zeng ; Wu, Tzong-Dar ; Cheng, Shyi-Chy ; Chang, Chin-Chun ; Juang, Jih-Gau ; Liou, Chyng-Hwa ; Hsu, Te-Hua ; Huang, Yii-Shing ; Huang, Cheng-Ting ; Lin, Chen-Chou ; Peng, Yan-Tsung; Huang, Ren-Jie; Jhang, Jia-Yao; Liao, Yen-Hsiang; Lin, Chin-YangJ MED BIOL ENG6
622021Rheotaxis and migration of an unsteady microswimmerOmori, T.; Kikuchi, K.; Schmitz, M.; Pavlovic, M.; Cheng-His Chuang ; Ishikawa, T.Journal of Fluid Mechanics
632021Investigation on the ballistic induced nanotwinning in the Mn-free Fe27Co24Ni23Cr26 high entropy alloy plateChung, Tsai-Fu; Chiu, Po-Han; Tai, Cheng-Ling; Li, You-Lin; Wang, Le-Min; Chen, Chih-Yuan; Yeh, Jien-Wei; Hsiao, Chien-Nan; Ou, Da-Zheng; Wang, Shing-Hoa ; Yang, Jer-RenMATERIALS CHEMISTRY AND PHYSICS7
642021Effect of Anodization Treatment on the Thickness, Hardness, and Microstructural Characterization of Anodic Aluminum Oxide Film on AA 6061 and Critical Patent AnalysisLee, Chun-Chieh; Chen, Chih-Wei; Lin, Jin-Shyong; Wang, Shing Hoa ; Lee, Chiang-Sheng; Chen, Chien-Chon; Lin, Ya-Hui; Chen, Chih-YuanJOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE1
652021Low-Threshold Bound State in the Continuum Lasers in Hybrid Lattice Resonance MetasurfacesYang, Jhen-Hong; Huang, Zhen-Ting; Maksimov, Dmitrii N.; Pankin, Pavel S.; Timofeev, Ivan V.; Hong, Kuo-Bing; Li, Heng; Chen, Jia-Wei; Hsu, Chu-Yuan; Liu, Yi-Yun; Lu, Tien-Chang; Lin, Tzy-Rong ; Yang, Chan-Shan; Chen, Kuo-PingLASER & PHOTONICS REVIEWS26
662021Microstructural Characterization and Mechanical Properties of Duplex and Super Austenitic Stainless Steels under Dynamic Impact DeformationWang, Shing-Hoa ; Hsiao, Wuan-Yun; Yang, Yo-Lun; Chen, Chih-Yuan; Yang, Jer-Ren; Lee, Woei-Shyan; Chen, Chien-Chon; Chiu, Po-KaiJOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE1
672021Design of Optimal Controllers for Unknown Dynamic Systems through the Nelder-Mead Simplex MethodTsai, Hsun-Heng; Fuh, Chyun-Chau ; Ho, Jeng-Rong; Lin, Chih-KuangMATHEMATICS1
682021An integrally formed design for the rotational balancing of disk camsChang, Wen-Tung ; Hu, Yu-EnMECHANISM AND MACHINE THEORY3
692021Curved-Mechanical Characteristic Measurements of Transparent Conductive Film-Coated Polymer Substrates Using Common-Path Optical InterferometryWen, Bor-Jiunn ; Hsu, Jui-JenCOATINGS1
702021An Intelligent Data-Driven Learning Approach to Enhance Online Probabilistic Voltage Stability Margin PredictionSu, Heng-Yi ; Hong, Hsu-HuiIEEE T POWER SYST5
712021Effects of starlike control discs on flow structures and combustion capabilityYen, Shun-Chang ; Ye, Cheng-En; San, Kuo-ChingENERGY3
722021Thin layer electrolyte impregnation into porous anode-supported fuel cell by ultrasonic spray pyrolysisKo, Fu-Yin; Chiu, Te-Wei; Wu, Rudder T.; Chen, Tai-Cheng; Wang, Shing-Hoa ; Chang, Horng-Yi INT J HYDROGEN ENERG3
732021Design of wind-turbine blades for improving aerodynamic performance using hybrid bladesYen, Shun-Chang ; Liu, Wei-Shen; San, Kuo-Ching; Wang, Wei-FanOCEAN ENG3
742021Improvement of the Adhesion and Diamond Content of Electrodeposited Cu/Microdiamond Composite Coatings by a Plated Cu InterlayerWang, Xiaoli; Chou, Chau-Chang ; Wu, Liberty Tse-Shu; Wu, Rudder; Lee, Jyh-Wei; Chang, Horng-Yi MATERIALS3
752021Developing an Optimal Scheduling of Taiwan Power System With Highly Penetrated Renewable Energy Resources and Pumped Hydro StoragesSu, Heng-Yi ; Jian-Hong Liu ; Chu, Chia-Chi; Lee, Sheng-Huei; Hong, Ying-Yi; Lin, Yu-Jen; Liao, Ching-JungIEEE T IND APPL4
762021Room-temperature active modulation of plasmonic nanolasers by current injection on hybrid graphene-insulator-metal platformsLi, Heng; Huang, Zhen-Ting; Hong, Kuo-Bin; Chen, Jia-Wei; Cheng, Chang-Wei; Chen, Kuo-Ping; Lin, Tzy-Rong ; Gwo, Shang-jr; Lu, Tien-ChangJOURNAL OF APPLIED PHYSICS4
772021Analysis and Experimental Verification of Mechanical Errors in Nine-Link Type Double-Toggle Mold/Die Clamping MechanismsChang, Wen-Tung ; Lee, Wei-, I; Hsu, Kuan-LunAPPLIED SCIENCES-BASEL6
782021Experimental and theoretical investigations on sensing and dynamic characteristics of PVDF thin filmLin, Yu-Chih ; Huang, Yu-Hsi; Ma, Chien-Ching; Chang, Chun-KaiJOURNAL OF MECHANICS4
792021Health-diagnosis of electromechanical system with a principal-component bayesian neural network algorithmWen, Bor-Jiunn ; Lin, Yung-Sheng; Tu, Hsing-Min; Hsieh, Cheng-ChangJOURNAL OF INTELLIGENT & FUZZY SYSTEMS1
802021Intelligent wearable device of auxiliary force using fuzzy-Bayesian backpropagation controlWen, Bor-Jiunn ; Kao, Chia-Hung; Yeh, Che-ChihJOURNAL OF INTELLIGENT & FUZZY SYSTEMS3
812021Temperature-Dependent Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Tensile Quasi-Static and Fatigue Properties of Epoxy NanocompositesJen, Yi-Ming ; Chang, Hao-Huai; Lu, Chien-Min; Liang, Shin-YuPOLYMERS16
822021Applying the Simplex Method to Design the Optimal Parameters of a Sliding Mode Controller for a System With Input Saturation and Unknown Disturbance BoundFuh, Chyun-Chau ; Tsai, Hsun-HengIEEE ACCESS1
832021Investigation of resonant and energy harvesting characteristics of piezoelectric fiber composite bimorphsLin, Yu-Chih ; Tseng, Kuo-Shun; Ma, Chien-ChingMATERIALS & DESIGN7
842021Structure and Photocatalytic Influence of N-doping ATO Nano-tubes on Antibacterial Activity Toward Escherichia coliWang, Shing-Hoa ; Liu, Shiu-Mei; Hu, Kan-Hung; Chen, Chien-Chon; Lin, Tai-Yuan ; Juang, Shuei-Wan ; Yen, Chia-Yuen; Lu, Shu-Ting; Liu, Chia-HengJOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN0
852020Investigation of nanotwins in the bimodal-structured Fe22Co22Ni20Cr22Mn14 alloy subjected to high-strain-rate deformation at cryogenic temperaturesTsai-Fu Chung; Pin-Jung Chen; Cheng-Ling Tai; Po-Han Chiu; Yo-Shiuan Lin; Chien-Nan Hsiao; Chih-Yuan Chen; Shing-Hoa Wang ; Jien-Wei Yeh; Woei-Shyan Lee; Chin-Lung Kuo; Jer-Ren YangMaterials Characterization
862020Grey-Taguchi-Based Optimization of Wire-Sawing for a Slicing CeramicTsai, Yao-Yang; Ho, Jihng-Kuo ; Wang, Wen-Hao; Hsieh, Chia-Chin; Tsao, Chung-Chen; Hsu, Chun-YaoProcesses
872020Current Modulation of Plasmonic Nanolasers by Breaking Reciprocity on Hybrid Graphene-Insulator-Metal PlatformsLi, Heng; Huang, Zhen-Ting; Hong, Kuo-Bin; Hsu, Chu-Yuan; Chen, Jia-Wei; Cheng, Chang-Wei; Chen, Kuo-Ping; Lin, Tzy-Rong ; Gwo, Shang-, Jr.; Lu, Tien-ChangADVANCED SCIENCE11
882020Comparison of dynamic-aging creep and pre-aged creep in Ti-15-3 beta titanium alloyPing-Jui Yu; Yuan-Yi Hsu; Shing-Hoa Wang ; Jer-Ren Yang; Yo-Lun Yang; Horng-Yi Chang; Chih-Yuan Chen; Hsueh-Ren ChenMaterials Science and Engineering A
892020Insight on creep behavior for arrayed interphase nano-precipitation in Ti-Microalloyed HSLA steelYang, Y. L.; Lin, Q. X.; Chen, C. Y.; Shing-Hoa Wang ; Chen, H. R.; Tsai, B. S.; Liu, H. C.; Yi-Ming Jen Materials Chemistry and Physics
902020考慮再生能源高滲透率下之抽蓄水力電廠最佳機組排程研究蘇恆毅 ; 劉建宏 ; 朱家齊; 李盛輝; 洪穎怡; 林堉仁; 廖清榮台電工程月刊
912020散熱鰭片的模型建立與打樣技術何靖國 ; 羅雲康; 邱士育; 黃祥順; 張宗鈺
922020Characteristics of flakes stacked Cr2N with many domains in super duplex stainless steelPo-Chiang Lin; Yu-Ting Tsai; Neng-Hao Gan; Jer-Ren Yang; Shing-Hoa Wang ; Horng-Yi Chang ; Tzy-Rong Lin; Po-Kai ChiuCrystals
932020A Miniature Intermittent-Flow Respirometry System with a 3D-Printed, Palm-Sized Zebrafish Treadmill for Measuring Rest and Activity Metabolic RatesShih-Hao Huang ; Tsao, C. W.; Fang, Y. H.Sensors3
942020Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Monotonic and Fatigue Properties of Uncracked and Cracked Epoxy CompositesJen, Yi-Ming ; Huang, Jui-Cheng; Zheng, Kun-YangPOLYMERS-BASEL17
952020Theoretical and numerical investigations on resonant characteristics of two piezoelectric plates coupled with a finite fluid fieldHuang, Y. H.; Yu-Chih Lin ; Liao, C. Y.; Jhuang, K. L.Archive of Applied Mechanics
962020Microstructure Characterization of Massive Ferrite in Laser-Weldments of Interstitial-Free SteelsLiu, B. P. H.; Chung, T. F.; Yang, J. R.; Fu, J. X.; Chen, C. Y.; Shing-Hoa Wang ; Tsai, M. C.; Huang, C. Y.Metals3
972020Wear Properties of Sc-Bearing Zr-Based Composite BMG with Nano-CuZr(2)under LubricationShing-Hoa Wang ; Chung, H. H.; Hsu, C. A.; Liaw, P. K.; Chau-Chang Chou ; Rong-Tan Huang ; Horng-Yi Chang Applied Sciences-Basel
982020A novel technique for developing a dual-phase steel with a lower strength difference between ferrite and martensiteChen, C. Y.; Li, C. H.; Tsao, T. C.; Chiu, P. H.; Tsai, S. P.; Yang, J. R.; Chiang, L. J.; Shing-Hoa Wang Materials Today Communications10
992020Graphene-Loaded Plasmonic Zirconium Nitride and Gold Nanogroove Arrays for Surface-Charge ModificationsYu, M. W.; Ishii, S.; Ku, J. R.; Yang, J. H.; Huang, C. H.; Lu, T. C.; Tzy-Rong Lin ; Nagao, T.; Chen, K. P.Acs Applied Nano Materials6
1002020Tribological and mechanical properties of Cu/Ni-microdiamond bilayers on brass substrates coated by composite electrodeposition technologyWang, X. L.; Chau-Chang Chou ; Yang, Y. C.; Wu, R.; Lee, J. W.; Horng-Yi Chang Surface Topography-Metrology and Properties6
1012020Structural Colors Enabled by Lattice Resonance on Silicon Nitride MetasurfacesYang, J. H.; Babicheva, V. E.; Yu, M. W.; Lu, T. C.; Tzy-Rong Lin ; Chen, K. P.Acs Nano58
1022020Dual Photonic-Phononic Crystal Slot Nanobeam with Gradient Cavity for Liquid SensingChung, Y. C.; Chiu, H. T.; Hsu, J. C.; Lin, Y. F.; Kuo, C. T.; Chang, Y. W.; Chen, C. Y.; Tzy-Rong Lin ; Nan-Nong Huang Crystals1
1032020Microstrain and boundary misorientation evolution for recrystallized super DSS after deformationLi, J. S.; Cheng, G. J.; Yen, H. W.; Yang, Y. L.; Horng-Yi Chang ; Wu, C. Y.; Shing-Hoa Wang ; Yang, J. R.Materials Chemistry and Physics8
1042020Experimental analysis of interfacial shear stress and electrical resistance of indium tin oxide-coated polyethylene terephthalate films for a whole folding testBor-Jiunn Wen ; Huang, S. A.; Tseng, T. Y.Journal of Plastic Film & Sheeting2
1052020Static bending strength assessment of sandwich panels with glass/polypropylene faces and aluminum foam coresJen, Yi-Ming ; Tang, Zih-HeMODERN PHYSICS LETTERS B3
1062020Static bending strength assessment of sandwich panels with glass/polypropylene faces and aluminum foam coresYi-Ming Jen ; Tang, Z. H.Modern Physics Letters B
1072020A comparative study on the tribological behavior of various thermally sprayed Inconel 625 coatings in a saline solution and deionized waterChen, T. C.; Chau-Chang Chou ; Yung, T. Y.; Cai, R. F.; Huang, J. Y.; Yang, Y. C.Surface & Coatings Technology
1082020Preparation and investigation of diamond-incorporated copper coatings on a brass substrate by composite electrodepositionWang, X. L.; Chau-Chang Chou ; Lee, J. W.; Wu, R.; Chang, H. Y.; Ding, Y. F.Surface & Coatings Technology
1092020Full-Spectrum Analysis of Perovskite-Based Surface Plasmon NanolasersCheng, P. J.; Zheng, Q. Y.; Hsu, C. Y.; Li, H.; Hong, K. B.; Zhu, Y. Z.; Cui, Q. N.; Xu, C. X.; Lu, T. C.; Lin, R. Nanoscale Research Letters6
1102020Large delta T thermal cycling induced stress accelerates equilibrium and transformation in super DSSPing-Jui Yu; Shih-Che Chen; Hung-Wei Yen; Horng-Yi Chang; Jer-Ren Yang; Shing-Hoa Wang ; Po-Kai Chiu; Tzy-Rong Lin Crystals
1112020菲涅爾微結構隱形眼鏡殼模之流動平衡模擬分析莊程媐 ; 陳炤彰; 楊筑渝; 魏俊安
1122020PLA-PW複材之流動長度是騙之模擬分析及短設比對陳炤彰; 莊程媐 ; 董芳綺
1132020Research of Malaria- infected Red Blood CellsCheng-His Chuang ; Tohoku University Global COE Program GEM4 Summer SchoolGEM4参加報告書集
1142020非球面透鏡射出成形結合玻璃嵌件之形狀誤差模擬分析陳炤彰; 莊程媐 ; 周立翔
1152020隱形眼鏡殼模形狀誤差分析研究陳炤彰; 莊程媐 ; 宋政潮
1162020人工膝關節與膝內半月板模型建構何靖國 ; 區文安; 黃祥順; 邱士育; 張宗鈺
1172020Dynamic vibration of carbon nanotube-reinforced hybrid composite platesJihng-Kuo Ho ; Wen-Hua Lo; Yu-Chou Chengz; Chun-Sheng Chen
1182019Dynamic characteristics of hybrid nanocomposite platesChun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Jun-Kai Chen
1192019Vibration and stability of hybrid nanocomposite platesChun-Sheng Chen; Jihng-Kuo Ho ; Wen-Hsueh Kung; Jun-Kai Chen
1202019Thermal cycling induced stress-assisted sigma phase formation in super duplex stainless steelLi, J. S.; Cheng, G. J.; Yen, H. W.; Wu, L. T.; Yang, Y. L.; Wu, R. T.; Yang, J. R.; Shing-Hoa Wang Materials & Design6
1212019Investigation of massive ferrite in an interstitial-free steelLiu, B. P. H.; Yang, J. R.; Wu, Y. X.; Shen, P.; Fu, J. X.; Chen, C. Y.; Shing-Hoa Wang ; Tsai, M. C.; Huang, C. Y.Materials Characterization5
1222019Thermal effects on dynamic instability of hybrid nanocomposite platesChun-Sheng Chen; Jihng-Kuo Ho ; Ming-Feng Tsai; Wen-Hsueh Kung
1232019PARAMETER IDENTIFICATION USING THE NELDER-MEAD SIMPLEX ALGORITHM FOR LOW SIGNAL-TO-NOISE RATIO SYSTEMS IN A FREQUENCY DOMAINFuh, Chyun-Chau ; Tsai, Hsun-HengJOURNAL OF MARINE SCIENCE AND TECHNOLOGY-TAIWAN1
1242019Strong optomechanical coupling of light and highly confined acoustic phonons in slot dual-beam phoxonic crystal cavitiesTzy-Rong Lin ; Chang, C. C.; Hsu, J. C.Journal of Applied Physics7
1252019PARAMETER IDENTIFICATION USING THE NELDER-MEAD SIMPLEX ALGORITHM FOR LOW SIGNAL-TO-NOISE RATIO SYSTEMS IN A FREQUENCY DOMAINChyun-Chau Fuh ; Tsai, H. H.Journal of Marine Science and Technology-Taiwan
1262019Plasmonic Nanolasers Enhanced by Hybrid Graphene-Insulator-Metal StructuresLi, Heng; Li, Jhu-Hong; Hong, Kuo-Bin; Yu, Min-Wen; Chun, Yi-Cheng; Hsu, Chu-Yuan; Yang, Jhen-Hong; Cheng, Chang-Wei; Huang, Zhen-Ting; Chen, Kuo-Ping; Lin, Tzy-Rong ; Gwo, Shangjr; Lu, Tien-ChangNANO LETT36
1272019A Self-Powered Glucose Biosensor Operated Underwater to Monitor Physiological Status of Free-Swimming FishHuang, Shih-Hao ; Chen, Wei-Hung; Lin, Yu-ChenENERGIES6
1282019化學鍍Ni-P薄膜微結構及提升黃銅基材疲勞壽命之研究何靖國 ; 陳建勛; 黃國志; 鄭暐霖; 曾俊賢; 杜世綱; 許春耀
1292019微射出成型的製程參數對於含微流道生物晶片特性之影響陳俊生; 何靖國 ; 陳健志
1302019射出成型件縫合線強度之探討陳俊生; 何靖國 ; 嚴崇甡; 郭兆祥; 許春耀
1312019Inertial Effects on the Performance of a Bottom-Hinged Oscillating Wave Surge ConverterShiaw-Yih Tzang ; Yi-Chih Chow ; Jiahn-Horng Chen ; Chen-Chou Lin Journal of Offshore Mechanics and Arctic Engineering-Transactions of the Asme3
1322019Numerical and experimental analysis of the effect of metal tie layers on improving electrical properties of gold coated poly (dimethylsiloxane) flexible multi-layered films during foldingBor-Jiunn Wen ; Wang, P. C.; Hung, P. H.Journal of Plastic Film & Sheeting2
1332019Experimental and Numerical Investigation of Resonance Characteristics of Novel Pumping Element Driven by Two Piezoelectric BimorphsLin, Yu-Chih ; Huang, Yu-Hsi; Chu, Kwen-WeiAPPL SCI-BASEL5
1342019Residual Stress Image Inspections Based on Bending Testing for Flexible Transparent Conducting Substrates by Single-Direction Common-Path Image InterferometryBor-Jiunn Wen ; Huang, S. A.Ieee Sensors Journal3
1352019Ultrasonic-Assisted Innovative Polyurethane Tool to Polish Mold SteelMing-Yi Tsai; Yue-Feng Lin; Jihng-Kuo Ho ; Jing-Guang YangIJAT0
1362019In-situ transmission electron microscopy investigation of compressive deformation in interphase-precipitated carbide-strengthened alpha-iron single-crystal nanopillarsGao, M. Y.; Tsai, S. P.; Yang, J. R.; Chang, Y. L.; Ohmura, T.; Chen, C. Y.; Shing-Hoa Wang ; Wang, Y. T.; Huang, C. Y.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing4
1372019Nanothick aluminate long-afterglow phosphors using inherited hydrothermal derivingWu, C. Y.; Lei, C. M.; Wu, R.; Takei, T.; Shing-Hoa Wang ; Chau-Chang Chou ; Horng-Yi Chang Journal of Luminescence2
1382019Dynamic proportional-fuzzy grip control for robot arm by two-dimensional vision sensing methodWen, Bor-Jiunn ; Syu, Kai-Chen; Kao, Chia-HungJOURNAL OF INTELLIGENT & FUZZY SYSTEMS5
1392019Hemocompatibility and adhesion of heparin/dopamine and heparin/collagen self-assembly multilayers coated on a titanium substrateCheng, W. J.; Pan, Y. H.; Wu, T. C.; Chau-Chang Chou ; Yeh, C. H.; Jyh-Jier Ho Applied Surface Science
1402019Synergistic Effect on the Thermomechanical and Electrical Properties of Epoxy Composites with the Enhancement of Carbon Nanotubes and Graphene Nano PlateletsYi-Ming Jen ; Huang, J. C.Materials
1412019Dynamic proportional-fuzzy grip control for robot arm by two-dimensional vision sensing methodBor-Jiunn Wen ; Syu, K. C.; Kao, C. H.Journal of Intelligent & Fuzzy Systems3
1422019射出成形於非球面透鏡之殘留應力模擬分析研究陳炤彰; 莊程媐 ; 郭柏陞; 李宥增
1432019Motile unicellular alga flowing in a microchannelCheng-His Chuang ; Kikuchi, K.; Ishikawa, T.
1442018Size effect and strain induced double twin by nanoindentation in DSS weld metal of vibration-assisted GTAWHsueh, C. H.; Liao, M. J.; Shing-Hoa Wang ; Tsai, Y. T.; Yang, J. R.; Wu, R.; Lee, W. S.Materials Chemistry and Physics5
1452018Surface plasmon polariton nanolasers: Coherent light sources for new applicationsChou, Yu-Hsun; Chang, Chia-Jui; Lin, Tzy-Rong ; Lu, Tien-ChangCHINESE PHYS B7
1462018Effects of post-annealing on electrical properties of CuF2 center dot xH(2)O-doped KNN ceramics for rotary-linear ultrasonic motorsWeng, C. M.; Tsai, C. C.; Hong, C. S.; Chiang, C. H.; Chu, S. Y.; Lin, C. C.; Jyh-Jong Sheen Ceramics International
1472018Parametric design methodology for maximizing energy capture of a bottom-hinged flap-type WEC with medium wave resourcesChang, Y. C.; Chen, D. W.; Shiaw-Yih Tzang ; Yi-Chih Chow ; Chen-Chou Lin Renewable Energy12
1482018Experimental investigations on wave energy capture of two bottom-hinged-flap WECs operating in tandemChang, Y. C.; Shiaw-Yih Tzang ; Yi-Chih Chow ; Jiahn-Horng Chen ; Chen-Chou Lin Ocean Engineering7
1492018Rear-surface line-contact optimization using screen-print techniques on crystalline solar cells for industrial applicationsHo, Jiajer; Wu, Te-Chun; Ho, Jyh-Jier ; Hung, Chih-Hsiang; Chen, Sung-Yu; Ho, Jia-Show; Tsai, Song-Yeu; Chou, Chau-Chang ; Yeh, Chi-HsiaoMAT SCI SEMICON PROC2
1502018Bioenergetic Health Assessment of a Single Caenorhabditis elegans from Postembryonic Development to Aging Stages via Monitoring Changes in the Oxygen Consumption Rate within a Microfluidic DeviceShih-Hao Huang ; Lin, Y. W.Sensors8
1512018Non-premixed flame characteristics and exhaust gas concentrations behind rifled bluff-body conesShun-Chang Yen ; Shih, C. L.; San, K. C.Journal of the Energy Institute5
1522018High-Performance Plasmonic Nanolasers with a Nanotrench Defect Cavity for Sensing ApplicationsCheng, P. J.; Huang, Z. T.; Li, J. H.; Chou, B. T.; Chou, Y. H.; Lo, W. C.; Chen, K. P.; Lu, T. C.; Tzy-Rong Lin Acs Photonics21
1532018Fatigue behavior and microstructural characteristics of a duplex stainless steel weld metal under vibration-assisted weldingTsai, Y. T.; Lin, P. C.; Chen, Y. W.; Shing-Hoa Wang ; Yang, J. R.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing5
1542018Structure and luminescence of core-shell phosphor aluminate-boron oxideWu, C. Y.; Lei, C. M.; Takei, T.; Wu, R.; Shing-Hoa Wang ; Chau-Chang Chou ; Horng-Yi Chang Journal of Alloys and Compounds2
1552018Collective spreading of red blood cells flowing in a microchannelCheng-His Chuang ; Kikuchi, K.; Ueno, H.; Numayama, K.; Yamaguchi, T.; Ishikawa, T.Journal of Biomechanics
1562018Hybrid photonic-plasmonic crystal nanocavity sensorsCheng, P. J.; Chiang, C. K.; Chou, B. T.; Huang, Z. T.; Ku, Y. C.; Kuo, M. K.; Hsu, J. C.; Tzy-Rong Lin Applied Physics a-Materials Science & Processing0
1572018Ultracompact Pseudowedge Plasmonic Lasers and Laser ArraysChou, Y. H.; Hong, K. B.; Chang, C. T.; Chang, T. C.; Huang, Z. T.; Cheng, P. J.; Yang, J. H.; Lin, M. H.; Tzy-Rong Lin ; Chen, K. P.; Gwo, S.; Lu, T. C.Nano Letters43
1582018Combined Temperature and Moisture Effect on the Monotonic and Fatigue Strengths of Sandwich Beams with Glass-Polypropylene Faces and Aluminum Foam CoresYi-Ming Jen ; Chang, C. W.Polymers & Polymer Composites
1592018Behavior of motile unicellular alga flowing in a microchannelCheng-His Chuang ; Kikuchi, K.; Kage, A.; Ishikawa, T.
1602017Metal for Plasmonic Ultraviolet Laser: Al or Ag?Chou, Y. H.; Hong, K. B.; Chung, Y. C.; Chang, C. T.; Chou, B. T.; Tzy-Rong Lin ; Arakelian, S. M.; Alodjants, A. P.; Lu, T. C.Ieee Journal of Selected Topics in Quantum Electronics14
1612017Effects of LiNbO3-doping on properties of (Na0.535K0.48)NbO3 piezoelectric ceramics with high electromechanical coupling coefficient for application in surface acoustic wave devicesWeng, C. M.; Tsai, C. C.; Hong, C. S.; Jyh-Jong Sheen ; Chu, S. Y.; Tang, J. F.; Zou, Y. H.Ceramics International
1622017Deep-subwavelength plasmonic-photonic hybrid band gap opening by acoustic Lamb wavesHsu, J. C.; Shih, J. H.; Tzy-Rong Lin Applied Physics Letters1
1632017Wind farm characteristics of side-by-side and tandem configurationsYen, Shun-Chang ; Huang, Jiang-Xun; San, Kuo-ChingOCEAN ENG1
1642017GaAsSb spacer effect in quasi-type-II InAs coupled-QDs for intraband absorption enhancementFeng, David Jui-Yang; Lin, Yen-Ju; Ku, Yun-Cheng; Jhang, Han-Yun; Lin, Tzy-Rong ; Kuo, Mao-KuenOPT MATER EXPRESS7
1652017Hydrodynamic Simulation of an Orbital Shaking Test for the Degradation Assessment of Blood-Contact Biomedical CoatingsCherng, W. J.; Dong, Z. S.; Chau-Chang Chou ; Yeh, C. H.; Pan, Y. H.Micromachines
1662017Characteristics of flow configurations around side-by-side twin wind bladesShun-Chang Yen ; Wu, C. H.; San, K. C.Experimental Thermal and Fluid Science0
1672017Improving the performance of solar cells with novel buffer structure by the chemical bath deposition techniqueHo, Jia-Show; Chang, Shih-Cheng; Ho, Jyh-Jier ; Hsu, Wei-Tse; Chiang, Chien-Chih; Tsai, Song-Yeu; Wang, Sheng-Shih; Lin, Cheng-Kai ; Chou, Chau-Chang ; Yeh, Chi-Hsiao; Wang, Kang L.MAT SCI SEMICON PROC10
1682017Low-temperature-sintered CuF2-doped NKN ceramics with excellent piezoelectric and dielectric propertiesWeng, C. M.; Tsai, C. C.; Jyh-Jong Sheen ; Hong, C. S.; Chu, S. Y.; Chen, Z. Y.; Su, H. H.Journal of Alloys and Compounds
1692017Measuring glass transition temperatures of polymers by using phase-stepping shadow moireHsu, J. S.; Bor-Jiunn Wen ; Li, W.; Yang, C. W.Polymer Testing4
1702017Surface roughness effects on aluminium-based ultraviolet plasmonic nanolasersChung, Y. C.; Cheng, P. J.; Chou, Y. H.; Chou, B. T.; Hong, K. B.; Shih, J. H.; Lin, S. D.; Lu, T. C.; Tzy-Rong Lin Scientific Reports22
1712017Simultaneous monitoring of oxygen consumption and acidification rates of a single zebrafish embryo during embryonic development within a microfluidic deviceShih-Hao Huang ; Huang, K. S.; Liou, Y. M.Microfluidics and Nanofluidics7
1722017Surface Properties of Nano-Film Type Patterning Electrode on Flexible Substrate for Bending TestBor-Jiunn Wen ; Lee, C. C.; Chang, M. W.; Lin, H. K.; Liou, Y. Y.; Cheng, S. W.Science of Advanced Materials2
1732017Lead-Free NKN-Based Materials for Ultrasonic Therapeutic Transducers: Resistance to Temperature and HumidityWeng, C. M.; Tsai, C. C.; Hong, C. S.; Jyh-Jong Sheen ; Chu, S. Y.Ecs Journal of Solid State Science and Technology
1742017Microstructures and mechanical properties of an a-C:N film as the interlayer and the outmost layer of a DLC-deposited Ti bio-alloyChau-Chang Chou ; Lin, J. S.; Wu, R.Ceramics International
1752016An innovative optical-based method and automation system for rapid and non-destructive measurement of the web thickness of microdrillsWen-Tung Chang ; Wu, J. H.Measurement
1762016Non-contact resistance measurement of transparent electrodes deposited on flexible display substrates under repetitive bending test by terahertz time domain spectroscopyLiu, T. A.; Yu, H. C. ; Chen, S. F.; Cheng, Y. C.; Bor-Jiunn Wen Displays6
1772016The Machining of Hard Mold Steel by Ultrasonic Assisted End MillingTsai, Ming; Chang, Chia; Ho, Jihng Applied Sciences
1782016Oxidized dopamine as the interlayer between heparin/collagen polyelectrolyte multilayers and titanium substrate: An investigation of the coating's adhesion and hemocompatibilityChau-Chang Chou ; Hsin, S. W.; Lin, H. C.; Yeh, C. H.; Wu, R.; Cherng, W. J.Surface & Coatings Technology
1792016Oxidation resistance and mechanical properties of Ta-Al-N coatingsLin, J. H.; Chau-Chang Chou ; Yung-I Chen Surface & Coatings Technology11
1802016Wear behavior of thermally sprayed Zn/15Al, Al and Inconel 625 coatings on carbon steelTai-Cheng Chen; Chau-Chang Chou ; Tung-Yuan Yung; Kun-Chao Tsai; Jiunn-Yuan HuangSurface & Coatings Technology26
1812016Experimental and Simulated Investigations of Thin Polymer Substrates with an Indium Tin Oxide Coating under Fatigue Bending LoadingsHsu, J. S.; Lee, C. C.; Bor-Jiunn Wen ; Huang, P. C.; Xie, C. K.Materials9
1822016Boosted photocatalytic efficiency through plasmonic field confinement with bowtie and diabolo nanostructures under LED irradiationLee, C. H.; Liao, S. C.; Shing-Hoa Wang ; Lai, D. Y.; Chiu, P. K.; Lee, J. W.; Wu, W. F.; Tzy-Rong Lin Optics Express6
1832016INFLUENCE OF SHOT-PEENING -INDUCED RESIDUAL STRESSES ON POST-NECKING BEHAVIOR OF TEMPERED ULTRAHIGH-STRENGTH LOW ALLOY 300M STEELShing-Hoa Wang ; Lin, Y. C.; Wu, B. F.; Hsu, H. C.; Yeh, J. J.; Yi-Ming Jen Journal of Marine Science and Technology-Taiwan
1842016High-Operation-Temperature Plasmonic Nanolasers on Single-Crystalline AluminumChou, Y. H.; Wu, Y. M.; Hong, K. B.; Chou, B. T.; Shih, J. H.; Chung, Y. C.; Chen, P. Y.; Tzy-Rong Lin ; Lin, C. C.; Lin, S. D.; Lu, T. C.Nano Letters93
1852016Investigation of Polishing Pads Impregnated with Fe and Al2O3 Particles for Single-Crystal Silicon Carbide WafersHo, Jihng-Kuo ; Huang, Chih-Yung; Tsai, Ming-Yi; Tsai, Che-ChengApplied Sciences
1862016Design and experimental evaluation of a circular saw blade with self-clamped cutting insertsWen-Tung Chang ; Chen, L. C.International Journal of Advanced Manufacturing Technology
1872016Decreased Hemolysis and Improved Hemodynamic Performance of Synchronized Bileaflet Mechanical ValveChau-Chang Chou ; Wu, T. C.; Liang, H. Y.; Yeh, C. H.; Cherng, W. J.; Yi-Chih Chow Annals of Thoracic Surgery0
1882016Modifications of the Cavity Perturbation Technique for Permittivity Measurements of Laminated SamplesJyh-Jong Sheen ; Weng, C. M.Ieee Transactions on Dielectrics and Electrical Insulation
1892016Single-crystalline aluminum film for ultraviolet plasmonic nanolasersChou, B. T.; Chou, Y. H.; Wu, Y. M.; Chung, Y. C.; Hsueh, W. J.; Lin, S. W.; Lu, T. C.; Tzy-Rong Lin ; Lin, S. D.Scientific Reports51
1902016Reaction effect of fly ash with Al-3Mg melt on the microstructure and hardness of aluminum matrix compositesFan, L. J.; Shuei-Wan Juang Materials & Design
1912016Modulation of wake flow and aerodynamic behaviors around a square cylinder using an upstream control barShun-Chang Yen ; Wu, S. F.; San, K. C.Experimental Thermal and Fluid Science7
1922016Effects of Non-Stoichiometry on the Microstructure, Oxygen Vacancies, and Electrical Properties of KNN-Based Thin FilmsWeng, C. M.; Tsai, C. C.; Hong, C. S.; Lin, C. C.; Chen, C. C.; Chu, S. Y.; Jyh-Jong Sheen ; Chen, Z. Y.; Su, H. H.Ecs Journal of Solid State Science and Technology
1932016A NEW DESIGN OF WET SCRUBBER FOR REMOVAL OF FINE PARTICLES FROM EXHAUST GASLiao, B. W.; Shuei-Wan Juang ; Lin, H.Environment Protection Engineering
1942015THEORETICAL ANALYSIS AND SPH SIMULATION FOR THE WAVE ENERGY CAPTURED BY A BOTTOM-HINGED OWSCChang, Y. C.; Chen, D. W.; Shiaw-Yih Tzang ; Yi-Chih Chow ; Jiahn-Horng Chen ; Chen-Chou Lin Journal of Marine Science and Technology-Taiwan8
1952015Realization of UV Plasmonic Nanolasers With Extremely Small Mode VolumeChou, B. T.; Chou, Y. H.; Chiang, C. K.; Wu, Y. M.; Tzy-Rong Lin ; Lin, S. D.; Lu, T. C.Ieee Journal of Selected Topics in Quantum Electronics3
1962015Thermal characteristics and exhaust-gas analysis behind bluff-body frustumsShun-Chang Yen ; Huang, Y. Z.; San, K. C.Fuel3
1972015Acousto-optic coupling in phoxonic crystal nanobeam cavities with plasmonic behaviorHsu, J. C.; Lu, T. Y.; Tzy-Rong Lin Optics Express14
1982015Strong Optomechanical Interaction in Hybrid Plasmonic-Photonic Crystal Nanocavities with Surface Acoustic WavesTzy-Rong Lin ; Lin, C. H.; Hsu, J. C.Scientific Reports23
1992015Investigation of Optical and Flexible Characteristics for Organic-Based Cholesteric Liquid Crystal Display by Utilizing Bending and Torsion LoadingsBor-Jiunn Wen ; Lee, C. C.; Hsu, J. S.; Huang, P. C.; Tsai, C. H.Journal of Display Technology4
2002015Effects of DLC coating on relaxing surface residual stress of the weld in titanium-bearing high-strength steelHung, C. P.; Wu, S. M.; Shing-Hoa Wang ; Wu, J. K.; Sung, C. M.Journal of the Chinese Institute of Engineers1
2012015Tribological and oxidational properties of porous high-pressure crystallized and vitamin E-incorporated ultra-high-molecular weight polyethylene as an artificial cartilageChau-Chang Chou ; Wang, Y. Z.; You, J. H.; Wu, C. L.Advances in Mechanical Engineering
2022015Investigation of mechanical properties and microstructures of aluminum-fly ash composite processed by friction stirringShuei-Wan Juang ; Xue, C. S.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing
2032015Influence of Preheating Temperatures and Adding Rates on Distributions of Fly Ash in Aluminum Matrix Composites Prepared by Stir CastingShuei-Wan Juang ; Fan, L. J.; Yang, H. P. O.International Journal of Precision Engineering and Manufacturing
2042015Optomechanical coupling in phoxonic-plasmonic slab cavities with periodic metal stripsTzy-Rong Lin ; Huang, Y. C.; Hsu, J. C.Journal of Applied Physics10
2052015Ultrastrong Mode Confinement in ZnO Surface Plasmon NanolasersChou, Y. H.; Chou, B. T.; Chiang, C. K.; Lai, Y. Y.; Yang, C. T.; Li, H.; Tzy-Rong Lin ; Lin, C. C.; Kuo, H. C.; Wang, S. C.; Lu, T. C.Acs Nano80
2062015FUZZY ASSESSMENT ON RESERVOIR WATER QUALITYLin, R. T. ; Wen-Cheng Huang Journal of Marine Science and Technology-Taiwan2
2072015Light-Addressable Measurement of in Vivo Tissue Oxygenation in an Unanesthetized Zebrafish Embryo via Phase-Based Phosphorescence Lifetime DetectionShih-Hao Huang ; Yu, C. H.; Chien, Y. L.Sensors2
2082015Nano-quasi-grating of optical diffraction on special stainless steel by a femtosecond-pulsed laserKuo, C. K.; Luo, S. W.; Tsai, H. Y.; Shing-Hoa Wang ; Wu, R. T.; Chou, M. C.; Shieh, M. C.; Yang, Y. C.; Huang, K.; Tsong-Ru Tsai Materials Letters0
2092015Dispersion of red blood cells in a micro channelCheng-His Chuang ; Kikuchi, K.; Numayama, K.; Imai, Y.; Yamaguchi, T.; Ishikawa, T.,
2102015Combined Diamond Disks in Chemical Mechanical PolishingMing Yi Tsai; Jihng Kuo Ho ; Jyu Lin Zeng Key Engineering Materials
2112014Effect of temperature on fatigue strength of carbon nanotube/epoxy compositesYi-Ming Jen ; Huang, C. Y.Journal of Composite Materials
2122014Light-Addressable Electrodeposition of Magnetically-Guided Cells Encapsulated in Alginate Hydrogels for Three-Dimensional Cell PatterningShih-Hao Huang ; Chu, H. T.; Liou, Y. M.; Huang, K. S.Micromachines3
2132014Coupled nanowire-based hybrid plasmonic nanocavities on thin substratesCheng, P. J.; Chiang, C. K.; Chung, Y. C.; Tien, C. H.; Tzy-Rong Lin Nanoscale Research Letters3
2142014Novel method to remove tall diamond grits and improve diamond disk performanceHo, Jihng Kuo ; Tsai, Che Hsiung; Tsai, Ming Yi; Yeh, Tung ShengThe International Journal of Advanced Manufacturing Technology
2152014The greater scattering phenomenon beyond Bradford's law in patent citationHuang, M. H.; Huang, W. T.; Chang, C. C.; Chen, D. Z.; Chang-Pin Lin Journal of the Association for Information Science and Technology
2162014THEORETICAL DESIGN STUDY ON SHAFTING ALIGNMENT CALCULATION FOR HIGH SPEED CRAFTChang, M. H.; Shuei-Wan Juang Brodogradnja
2172014Stop-flow Lithography to Continuously Fabricate Microlens Structures Utilizing an Adjustable Three-Dimensional MaskShih-Hao Huang ; Lin, C. K.Micromachines3
2182014NUMERICAL MODELING OF WAVE-INDUCED ROTATIONS OF A BOTTOM-HINGED FLAPPER WITH A SPH MODELChen, D. W.; Shiaw-Yih Tzang ; Hsieh, C. M.; Hwang, R. R. J.; Yi-Chih Chow ; Jiahn-Horng Chen ; Chen-Chou Lin Journal of Marine Science and Technology-Taiwan7
2192014Flow patterns and characteristics of two tandem wing-blades at low Reynolds numbersSan, K. C.; Hung, S. C.; Shun-Chang Yen Proceedings of the Institution of Mechanical Engineers Part G-Journal of Aerospace Engineering2
2202014SURFACE MODIFICATION OF ATO PHOTOCATALYST ON ITS BACTERICIDAL EFFECT AGAINST ESCHERICHIA COLIChiang, H. H.; Tsai, T. L.; Yang, Y. C.; Lee, J. W.; Yeun-Jung Wu ; Chen, C. C.; Tai-Yuan Lin ; Shing-Hoa Wang ; Chih-Ching Huang ; Hsin-Yiu Chou Journal of Marine Science and Technology-Taiwan
2212014EFFECTS OF SWEEP ANGLES AND ANGLES OF ATTACK ON JUNCTION-FLOW PATTERNSSan, K. C.; Lin, Y. Z.; Shun-Chang Yen Journal of Marine Science and Technology-Taiwan0
2222014Development of a novel cooling system-assisted minimum quantity lubrication method for improvement of milling performanceHo, Jihng Kuo ; Tsai, Che Hsiung; Tsai, Ming Yi; Tu, Ming Xim; Sung, James C.Journal of the Chinese Institute of Engineers
2232014Development of a Novel Nanodiamond-Impregnated Polishing Pad for Chemical Mechanical Polishing of Oxide FilmJihng-Kuo Ho ; Che-Hsiung Tsai; Ming-Yi Tsai; Jui-Hsuan Chiang中國機械工程學刊
2242014A vision-aided automation system for destructive web thickness measurement of microdrillsWen-Tung Chang ; Chuang, S. F.; Tsai, Y. S.; Tang, G. R.; Shiou, F. J.International Journal of Advanced Manufacturing Technology
2252014Cold-flow patterns behind novel rifled bluff-body conesSan, K. C.; Shih, C. L.; Shun-Chang Yen Journal of Mechanical Science and Technology1
2262014Assessment of the inhibition of Dengue virus infection by carrageenan via real-time monitoring of cellular oxygen consumption rates within a microfluidic deviceShih-Hao Huang ; Lin, Y. S.; Wu, C. W.; Chang-Jer Wu Biomicrofluidics6
2272014一種銥計畫體溫血壓量測技術吳尚旻; 林進豐 ; 劉展志; 王照盛; 吳宗達 ; 張淑淨 ; 曾敬翔 ; 何志傑 ; 林鎮洲 ; 張忠誠 International Journal of Science and Engineering
2282014Two-stage cumulative bending fatigue behavior for the adhesively bonded aluminum honeycomb sandwich panelsYi-Ming Jen ; Teng, F. L.; Teng, T. C.Materials & Design
2292013Blood compatibility and adhesion of collagen/heparin multilayers coated on two titanium surfaces by a layer-by-layer techniqueChau-Chang Chou ; Zeng, H. J.; Yeh, C. H.Thin Solid Films
2302013Flame Patterns and Combustion Intensity Behind Rifled Bluff-Body FrustumsSan, K. C.; Huang, Y. Z.; Shun-Chang Yen Journal of Engineering for Gas Turbines and Power-Transactions of the Asme7
2312013一種銥計劃體溫血壓量測技術吳尚旻; 林進豐 ; 劉展志; 王照盛; 吳宗達 ; 張淑淨 ; 張淑淨 ; 何志傑 ; 林鎮洲 ; 張忠誠 
2322013Metabolic profile analysis of a single developing zebrafish embryo via monitoring of oxygen consumption rates within a microfluidic deviceShih-Hao Huang ; Huang, K. S.; Yu, C. H.; Hong-Yi Gong Biomicrofluidics
2332013Adaptive multipath mitigation tracking system for GPS receiverMao, W. L.; Du, J. S.; Jyh-Jong Sheen ; Hwang, C. S.Aerospace Science and Technology
2342013A NOVEL SIGNAL PROCESSING APPROACH FOR VALVE HEALTH CONDITION CLASSIFICATION OF A RECIPROCATING COMPRESSOR WITH SEEDED FAULTS CONSIDERING TIME-FREQUENCY PARTITIONSYih-Hwang Lin ; Lee, W. S.; Wu, C. Y.Journal of Marine Science and Technology-Taiwan3
2352013NUMERICAL STABILITY ANALYSIS FOR INDEPENDENT MODAL VIBRATION SUPPRESSION OF A FLUID-CONVEYING PIPE USING A PIEZOELECTRIC INERTIA ACTUATORYih-Hwang Lin ; Chen, J. L.; Chu, C. L.; Tsai, Y. K.Journal of Marine Science and Technology-Taiwan0
2362013Photonic band gaps induced by submicron acoustic plate waves in dielectric slab waveguidesHsu, J. C.; Lin, C. H.; Ku, Y. C.; Tzy-Rong Lin Optics Letters10
2372013Thermal stability of CrTaN hard coatings prepared using biased direct current sputter depositionLin, K. Y.; Chau-Chang Chou ; Yung-I Chen Thin Solid Films8
2382013Characterization and haemocompatibility of fluorinated DLC and Si interlayer on Ti6Al4VChau-Chang Chou ; Wu, Y. Y.; Lee, J. W.; Yeh, C. H.; Huang, J. C.Surface & Coatings Technology
2392013DESIGN OF A MICROWAVE BANDPASS FILTER WITH COMPACT SIZE AND WIDE STOPBANDJyh-Jong Sheen ; Cheng, Y. H.; Liu, W. S.Microwave and Optical Technology Letters
2402013Light-Addressed Electrodeposition of Enzyme-Entrapped Chitosan Membranes for Multiplexed Enzyme-Based Bioassays Using a Digital Micromirror DeviceShih-Hao Huang ; Wei, L. S.; Chu, H. T.; Jiang, Y. L.Sensors15
2412013Cold-flow patterns and mixing index behind/near rifled bluff-body frustumsSan, K. C.; Huang, Y. Z.; Shun-Chang Yen Journal of Visualization3
2422013Suppression of Hunting in an ILPMSM Driver System Using Hunting CompensatorYao, W. H.; Tung, P. C.; Chyun-Chau Fuh ; Chou, F. C.Ieee Transactions on Industrial Electronics
2432013Flame Structure and Combustion Capability of Non-Premixed Rifled NozzlesSan, K. C.; Hsu, H. J.; Shun-Chang Yen Journal of Engineering for Gas Turbines and Power-Transactions of the Asme2
2442013Fatigue characterization of acid-treated carbon nanotube/epoxy compositesYi-Ming Jen ; Huang, C. Y.Journal of Composite Materials
2452013Microwave Measurements of Dielectric Constants for High Dielectric Constant Ceramic Materials by Mixture EquationsJyh-Jong Sheen ; Wang, Y. L.Ieee Transactions on Dielectrics and Electrical Insulation
2462013Plasmonic gap-mode nanocavities with metallic mirrors in high-index claddingCheng, P. J.; Weng, C. Y.; Chang, S. W.; Tzy-Rong Lin ; Tien, C. H.Optics Express10
2472013IMPROVING COMBUSTION INTENSITY AND MODULATING FLAME BEHAVIORS USING HELICAL-GROOVED CONESShun-Chang Yen ; Shih, C. L.Journal of Mechanics1
2482013Cladding Effect on Hybrid Plasmonic Nanowire Cavity at Telecommunication WavelengthsCheng, P. J.; Weng, C. Y.; Chang, S. W.; Tzy-Rong Lin ; Tien, C. H.Ieee Journal of Selected Topics in Quantum Electronics6
2492013An optical-based method and system for the web thickness measurement of microdrills considering runout compensationWen-Tung Chang ; Lu, S. Y.; Chuang, S. F.; Shiou, F. J.; Tang, G. R.International Journal of Precision Engineering and Manufacturing
2502013Automated optical inspection for the runout tolerance of circular saw bladesWen-Tung Chang ; Su, C. H.; Guo, D. X.; Tang, G. R.; Shiou, F. J.International Journal of Advanced Manufacturing Technology
2512013Temperature-dependent monotonic and fatigue bending strengths of adhesively bonded aluminum honeycomb sandwich beamsYi-Ming Jen ; Lin, H. B.Materials & Design
2522013Application of the inclined exposure and molding process to fabricate a micro beam-splitter with nanometer roughnessChuang, Y. J.; Shih-Hao Huang ; Chen, Y. C.; Hung, K. Y.Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems2
2532013Enhanced acousto-optic interaction in two-dimensional phoxonic crystals with a line defectTzy-Rong Lin ; Lin, C. H.; Hsu, J. C.Journal of Applied Physics40
2542013Tolerance analysis and synthesis of cam-modulated linkagesWen-Tung Chang ; Wu, L. I.Mathematical and Computer Modelling
2552013Influences of upstream floor roughness and aerodynamic parameters on swept-wing junction flowShun-Chang Yen ; San, K. C.; Lin, Y. Z.Experimental Thermal and Fluid Science3
2562013Mechanical properties of fluorinated DLC and Si interlayer on a Ti biomedical alloyChau-Chang Chou ; Wu, Y. Y.; Lee, J. W.; Huang, J. C.; Yeh, C. H.Thin Solid Films
2572013Cells adhered and cultured on microcantileversWu, C. W.; Chang, S. P.; Shih-Hao Huang ; Chang-Jer Wu Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems1
2582013COMBINED TEMPERATURE AND MOISTURE EFFECT ON THE STRENGTH OF CARBON NANOTUBE REINFORCED EPOXY MATERIALSYi-Ming Jen ; Huang, C. Y.Transactions of the Canadian Society for Mechanical Engineering
2592013Gradient diffusion of red blood cells in blood flow through a Y-shape microchannelCheng-His Chuang ; Ishikawa, T.; Ueno, H.; Numayama, K.; Imai, Y.; Yamaguchi, T.
2602012Light-addressable measurements of cellular oxygen consumption rates in microwell arrays based on phase-based phosphorescence lifetime detectionShih-Hao Huang ; Hsu, Y. H.; Wu, C. W.; Chang-Jer Wu Biomicrofluidics13
2612012Twinned formation in weld metal of titanium bearing nano precipitated high strength steelHsu, P. W.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Wang, Y. M.; Lin, Q. X.; Horng-Yi Chang Materials Chemistry and Physics
2622012Characteristic Flow Field Behind a Square-Cylinder Using Upstream Mesh FencesShun-Chang Yen ; Yang, C. W.Journal of Fluids Engineering-Transactions of the Asme3
2632012TECHNOLOGY FORECASTING VIA PUBLISHED PATENT APPLICATIONS AND PATENT GRANTSChen, D. Z.; Chang-Pin Lin ; Huang, M. H.; Chan, Y. T.Journal of Marine Science and Technology-Taiwan
2642012Stress concentration effect on the fatigue properties of carbon nanotube/epoxy compositesYi-Ming Jen ; Wang, Y. C.Composites Part B-Engineering
2652012THE STUDY OF CHLORIDE ION TRANSPORT BEHAVIOR OF MORTAR UNDER DIFFERENT STORING ENVIRONMENT TEMPERATURESWeng, S. H.; Chung-Chia Yang ; Cho, S. W.; Kuo-Cheng Yang Journal of Marine Science and Technology-Taiwan
2662012THE RELATIONSHIP BETWEEN MIGRATION TIME IN ACMT AND PONDING TIME IN PONDING TEST FOR CEMENTITIOUS MATERIALSChung-Chia Yang ; Tsai, Y. M.; Kuo-Cheng Yang Journal of Marine Science and Technology-Taiwan
2672012SQUARE-CYLINDER FLOW CHARACTERISTICS MODULATED USING UPSTREAM CONTROL RODShun-Chang Yen ; Wu, S. F.Journal of Mechanics5
2682012Applying the ARPSO Algorithm to Shafting Alignment Optimization DesignShuei-Wan Juang ; Ming-Hsiung Chang; Juan-Chen Huang Brodogradnja
2692012Novel core-shell structure of perovskite anode and characterizationShing-Hoa Wang ; Wang, Y. M.; Lai, C. W.; Lin, C. H.; Cheng, S. Y.; Horng-Yi Chang International Journal of Hydrogen Energy9
2702012Fatigue life evaluation of adhesively bonded scarf jointsYi-Ming Jen International Journal of Fatigue
2712012Combining a feedback linearization controller with a disturbance observer to control a chaotic system under external excitationChyun-Chau Fuh ; Tsai, H. H.; Yao, W. H.Communications in Nonlinear Science and Numerical Simulation
2722012The Effect of Nitrogen-Doped ATO Nanotubes on Radical Multiplication of Buffer Media by Visible Light Photocatalysis Rather UVHu, K. H.; Todd Hsu ; Chen, C. C.; Tsai, H. T.; Chiang, H. H.; Tai-Yuan Lin ; Shing-Hoa Wang Journal of Nanomaterials
2732012Collective diffusion of red blood cells from high concentration to lowChuang, C. H ; Ishikawa, T.; Ueno, H.; Numayama, K.; Imai, Y.; Yamaguchi, T.
2742012Impregnation of Hydrogenated Graphite in Polyurethane Pad for Improved Performance in Chemical-Mechanical Polishing ProcessesTsai, M. Y.; Ho, J. K. ; Tsai, C. H.; Chen, C. Y.Advanced Science Letters0
2752011Finite element based fatigue life estimation of the solder joints with effect of intermetallic compound growthChiou, Y. C.; Yi-Ming Jen ; Huang, S. H.Microelectronics Reliability
2762011STUDIES OF DIELECTRIC CONSTANT MEASUREMENTS AT MICROWAVE FREQUENCY USING MIXING EQUATIONS-THE ANALYSES ON FIVE RULESJyh-Jong Sheen ; Hong, Z. W.; Liu, W. H.; Mao, W. L.Microwave and Optical Technology Letters
2772011Gap-flow patterns behind twin-cylinders at low Reynolds numberShun-Chang Yen ; Liu, C. T.Journal of Mechanical Science and Technology4
2782011Quality Measurements of Voice Over IP for a Hybrid Local Area NetworkChi-Min Li ; Chang-Pin Lin 
2792011A Robust Uncertainty Controller With System Delay Compensation for an ILPMSM System With Unknown System ParametersYao, W. H.; Tung, P. C.; Chyun-Chau Fuh ; Chou, F. C.Ieee Transactions on Industrial Electronics
2802011Light-addressable electrodeposition of cell-encapsulated alginate hydrogels for a cellular microarray using a digital micromirror deviceShih-Hao Huang ; Hsueh, H. J.; Jiang, Y. L.Biomicrofluidics17
2812011Martensite nucleation site and grain refinement in duplex titanium alloy weldment by active flux with nanoparticle additionHsu, P. W.; Chen, R. S.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Tsai, S. Y.; Duh, J. G.Science and Technology of Welding and Joining6
2822011Notch Effect and FEM Analysis of Tensile Behavior of Ti-6Al-4VTsai, G. C.; Shing-Hoa Wang ; Wang, C. C.; Kao, C. H.Advanced Science Letters0
2832011Flow patterns and vortex shedding behavior behind a square cylinderShun-Chang Yen ; Yang, C. W.Journal of Wind Engineering and Industrial Aerodynamics44
2842011Wear behavior of Er-bearing Cu-based amorphous/crystal BMG composite under oil lubricationChau-Chang Chou ; Chung, H. H.; Liaw, P. K.; Liou, Y.; Huang, J. C.; Hsu, Y. Y.; Shing-Hoa Wang Intermetallics11
2852011Winglet Dihedral Effect on Flow Behavior and Aerodynamic Performance of NACA0012 WingsShun-Chang Yen ; Fei, Y. F.Journal of Fluids Engineering-Transactions of the Asme
2862011Dynamic strain aging in low cycle fatigue of duplex titanium alloysLin, Y. H.; Hu, K. H.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Lin, C. K.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing20
2872011HYDROGEN ABSORPTION/DESORPTION IN A METAL HYDRIDE REACTOR ACCOUNTING FOR VARIED EFFECTIVE THERMAL CONDUCTIVITYWang, C. Y.; Chyou, S. D.; Huang, N. N.; Shing-Hoa Wang ; Hwa-Chong Tien Journal of Marine Science and Technology-Taiwan
2882011Selective Deposition of Electrospun Alginate-Based Nanofibers onto Cell-Repelling Hydrogel Surfaces for Cell-Based MicroarraysShih-Hao Huang ; Chien, T. C.; Hung, K. Y.Current Nanoscience6
2892011DEFORMATION OF ROLLING SHUTTERS UNDER UNIFORM WIND PRESSURENan-Nong Huang ; Chang, S. M.Journal of Marine Science and Technology-Taiwan
2902011Reynolds number effects on flow characteristics and aerodynamic performances of a swept-back wingShun-Chang Yen ; Huang, L. C.Aerospace Science and Technology3
2912011AERODYNAMIC PERFORMANCE AND SHEDDING CHARACTERISTICS ON A SWEPT-BACK WINGShun-Chang Yen Journal of Marine Science and Technology-Taiwan
2922011Microtwin formation in the a phase of duplex titanium alloys affected by strain rateLin, Y. H.; Wu, S. M.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Yang, C. C.; Chiou, C. S.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing15
2932011Experimental investigation on the effect of tensile pre-strain on ratcheting behavior of 430 Stainless Steel under fully-reversed loading conditionChiou, Y. C.; Wen-Kai Weng ; Yi-Ming Jen Engineering Failure Analysis
2942011Fracture mechanics study on the intermetallic compound cracks for the solder joints of electronic packagesYi-Ming Jen ; Chiou, Y. C.; Yu, C. L.Engineering Failure Analysis
2952011Self-Assembly in Micro- and Nanofluidic Devices: A Review of Recent EffortsKhoo, H. S.; Lin, C.; Shih-Hao Huang ; Tseng, F. G.Micromachines20
2962011Photocatalytic effect of anodic titanium oxide nanotubes on various cell culture mediaYu, C. K.; Hu, K. H.; Tsai, H. T.; Chen, C. C.; Liu, S. M.; Tai-Yuan Lin ; Chen, C. H.; Shing-Hoa Wang ; Todd Hsu Applied Physics a-Materials Science & Processing
2972011A Combined Input-state Feedback Linearization Scheme and Independent Component Analysis Filter for the Control of Chaotic Systems with Significant Measurement NoiseChyun-Chau Fuh ; Wang, M. C.Journal of Vibration and Control
2982011Wake flow behind two side-by-side square cylindersShun-Chang Yen ; Liu, J. H.International Journal of Heat and Fluid Flow
2992011Light-directed, spatially addressable oxygen detection in a hydrogel microarray based on phase-based lifetime detection using a digital micromirror deviceShih-Hao Huang ; Tsai, C. H.; Wu, C. W.; Chang-Jer Wu Sensors and Actuators a-Physical10
3002011Isothermal treatment influence on nanometer-size carbide precipitation of titanium-bearing low carbon steelWang, T. P.; Kao, F. H.; Shing-Hoa Wang ; Yang, J. R.; Huang, C. Y.; Chen, H. R.Materials Letters38
3012011MEASUREMENTS OF MICROWAVE DIELECTRIC PROPERTIES OF (1-X)TIO2-XCATIO(3) AND (1-X)TIO2-XSRTIO3 THIN FILMS BY THE CAVITY PERTURBATION METHODJyh-Jong Sheen ; Li, C. Y.; Lin, S. W.Journal of Electromagnetic Waves and Applications
3022011Analysis of the paracrine loop between cancer cells and fibroblasts using a microfluidic chipHsu, T. H.; Xiao, J. L.; Tsao, Y. W.; Kao, Y. L.; Shih-Hao Huang ; Liao, W. Y.; Lee, C. H.Lab on a Chip40
3032011Gradient diffusion of red blood cells in blood flow through a Y-shape microchannelCheng-His Chuang ; Ishikawa, T.; Numayama, K.; Imai, Y.; Yamaguchi
3042011Diffusion of red blood cells from high concentration to low in a blood flow microchannelCheng-His Chuang ; Ishikawa, T.; Numayama, K.; Imai, Y.; Ueno, H.; Yamaguchi, T.
3052011Gradient diffusion of red blood cells in a Y-shape microchannelCheng-His Chuang ; Ishikawa, T.; Numayama, K.; Imai, Y.; Yamaguchi, T.
3062011Collective diffusion of red blood cells from high concentration to lowChuang, C. H ; Ishikawa, T.; Numayama, K.; Imai, Y.; Ueno, H.; Yamaguchi, T.
3072010Tribological properties of Cr-Si-N nanocomposite film adherent silicon under various environmentsLin, H. H.; Chau-Chang Chou ; Lee, J. W.Thin Solid Films
3082010Tribological behavior of nanodiamond-dispersed lubricants on carbon steels and aluminum alloyChau-Chang Chou ; Lee, S. H.Wear
3092010Dynamically adjustable three-dimensional gray masks operated by electrostatic force modulation for the fabrication of microlens arrays in microchannelsShih-Hao Huang ; Yu, Z. Y.; Lin, C. K.; Hung, K. Y.Journal of Micro-Nanolithography Mems and Moems3
3102010Measurements of dielectric properties of TiO2 thin films at microwave frequencies using an extended cavity perturbation techniqueJyh-Jong Sheen ; Li, C. Y.; Ji, L. W.; Mao, W. L.; Liu, W. H.; Chen, C. A.Journal of Materials Science-Materials in Electronics
3112010Development of an automatic arc welding system using an adaptive sliding mode controlWu, C. Y.; Tung, P. C.; Chyun-Chau Fuh Journal of Intelligent Manufacturing
3122010Molding and hot forming techniques for fabricating plastic aspheric lenses with high blue-light transmittanceHung, K. Y.; Chen, Y. K.; Shih-Hao Huang ; Shye, D. C.Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems7
3132010Research on electrostatic actuator polymer thin-film for controlling light scattering phenomenaHung, K. Y.; Chuang, Y. J.; Liao, T. H.; Shye, D. C.; Shih-Hao Huang Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems0
3142010Weld metal phase transformation of as welded 6Mo superaustenitic stainless steel after cross-weld fatigueWu, C. C.; Chen, C. Y.; Shing-Hoa Wang ; Yang, J. R.; Fang, J.Science and Technology of Welding and Joining0
3152010Microfluidic Systems for BiosensingLiu, K. K.; Wu, R. G.; Chuang, Y. J.; Khoo, H. S.; Shih-Hao Huang ; Tseng, F. G.Sensors71
3162010Inducement of bainite and carbide transformation from retained austenite based on a high strain rate (vol 62, pg 372, 2010)Hsu, H. C.; Lin, Y. C.; Shing-Hoa Wang ; Kao, F. H.; Lee, W. C.; Yang, J. R.; Hsu, P. W.; Yen, H. W.; Lee, W. S.Scripta Materialia0
3172010Bulk-metallic glasses joining in a supercooled-liquid regionKuo, P. H.; Shing-Hoa Wang ; Liaw, P. K.; Fan, G. J.; Tsang, H. T.; Qiao, D. C.; Jiang, F.Materials Chemistry and Physics19
3182010Application of the endochronic theory of plasticity for life prediction with asymmetric axial cyclic straining of AISI 304 stainless steelYi-Ming Jen ; Chiou, Y. C.International Journal of Fatigue
3192010Fractal dimension and surface topography on the diamond deposition of seeded WC-Co substratesChau-Chang Chou ; Lin, H. H.Journal of Applied Physics
3202010Time-averaged topological flow patterns and their influence on vortex shedding of a square cylinder in crossflow at incidenceHuang, R. F.; Lin, B. H.; Shun-Chang Yen Journal of Fluids and Structures47
3212010Inducement of bainite and carbide transformation from retained austenite based on a high strain rateHsu, H. C.; Lin, Y. C.; Shing-Hoa Wang ; Kao, F. H.; Lee, W. C.; Yang, J. R.; Hsu, P. W.; Yen, H. W.; Lee, W. S.Scripta Materialia3
3222010Evaluation of fatigue life of adhesively bonded aluminum single-lap joints using interfacial parametersYi-Ming Jen ; Ko, C. W.International Journal of Fatigue
3232010Configurable AC electroosmotic generated in-plane microvortices and pumping flow in microchannelsShih-Hao Huang ; Hsueh, H. J.; Hung, K. Y.Microfluidics and Nanofluidics10
3242010Hydrogen absorption properties of Mg2Ni alloy with excess Mg synthesized by wet milling in toluene without annealingWang, H. W.; Chyou, S. D.; Shing-Hoa Wang ; Chiu, P. K.; Yen, C. C.; Chen, B. Y.; Yang, M. W.; Hwa-Chong Tien ; Nan-Nong Huang Journal of Alloys and Compounds
3252010Constructing a new patent bibliometric performance measure by using modified citation rate analyses with dynamic backward citation windowsChen, D. Z.; Chang-Pin Lin ; Huang, M. H.; Huang, C. Y.Scientometrics
3262010MICROWAVE MEASUREMENTS OF DIELECTRIC CONSTANTS BY EXPONENTIAL AND LOGARITHMIC MIXTURE EQUATIONSJyh-Jong Sheen ; Hong, Z. W.; Su, C. W.; Chen, H. C.Progress in Electromagnetics Research-Pier
3272010漁船溫室氣體排放估算及建立清冊之研究鄭元良 ; 丁培毅 
3282010Generation of Tool Paths  and Five-axis B-spline Curve NC Commands for Centrifugal Impeller MachiningJ.S. Tsai; J. K. Ho ; K. W. Liao; C.Y. Chiu
3292010A Study of the Diamond Tools for Grinding Polycrystalline DiamondS. Y. Luo; J.K. Ho ; M. Y. Tsai; Liu, W. Chen Advanced Materials Research
3302009Impact deformation behavior of duplex and superaustenitic stainless steels welds by split Hopkinson pressure barShing-Hoa Wang ; Huang, C. S.; Lee, W. S.; Chen, T. H.; Wu, C. C.; Lien, C.; Tsai, H. Y.Metals and Materials International2
3312009Theory of plasmonic Fabry-Perot nanolasersChang, S. W.; Tzy-Rong Lin ; Chuang, S. L.Optics Express75
3322009Coating effect on optical resonance of plasmonic nanobowtie antennaTzy-Rong Lin ; Chang, S. W.; Chuang, S. L.; Zhang, Z. Y.; Schuck, P. J.Applied Physics Letters37
3332009Flow Patterns and Aerodynamic Performance of Unswept and Swept-Back WingsShun-Chang Yen ; Huang, L. C.Journal of Fluids Engineering-Transactions of the Asme12
3342009Sub-micron-structure machining on silicon by femtosecond laserTsai, H. Y.; Luo, S. W.; Wu, C. W.; Shing-Hoa Wang Transactions of Nonferrous Metals Society of China3
3352009Automated valve condition classification of a reciprocating compressor with seeded faults: experimentation and validation of classification strategyYih-Hwang Lin ; Liu, H. S.; Wu, C. Y.Smart Materials and Structures10
3362009Optimal control of chaotic systems with input saturation using an input-state linearization schemeChyun-Chau Fuh Communications in Nonlinear Science and Numerical Simulation
3372009Effect of thickness of face sheet on the bending fatigue strength of aluminum honeycomb sandwich beamsYi-Ming Jen ; Chang, L. Y.Engineering Failure Analysis
3382009LABVIEW-BASED FUZZY CONTROLLER DESIGN OF A LIGHTING CONTROL SYSTEMMou-Lin Jin ; Ho, M. C.Journal of Marine Science and Technology-Taiwan
3392009Amorphous phase formation in intermetallic Mg2Ni alloy synthesized by ethanol wet millingWang, H. W.; Chyou, S. D.; Shing-Hoa Wang ; Yang, M. W.; Hsu, C. Y.; Hwa-Chong Tien ; Nan-Nong Huang Journal of Alloys and Compounds
3402009Study of dielectric constants of binary composites at microwave frequency by mixture laws derived from three basic particle shapesJyh-Jong Sheen ; Hong, Z. W.; Liu, W. S.; Mao, W. L.; Chen, C. A.European Polymer Journal
3412009Comparisons of microwave dielectric property measurements by transmission/reflection techniques and resonance techniquesJyh-Jong Sheen Measurement Science and Technology
3422009Detecting unstable periodic orbits embedded in chaotic systems using the simplex methodChyun-Chau Fuh Communications in Nonlinear Science and Numerical Simulation
3432009Effect of the amount of adhesive on the bending fatigue strength of adhesively bonded aluminum honeycomb sandwich beamsYi-Ming Jen ; Ko, C. W.; Lin, H. B.International Journal of Fatigue
3442009Robust disturbance rejection method for uncertain system with disturbances of unknown frequenciesChen, Y. D.; Tung, P. C.; Chyun-Chau Fuh Nonlinear Dynamics
3452009Precipitation hardening of high-strength low-alloy steels by nanometer-sized carbidesChen, C. Y.; Yen, H. W.; Kao, F. H.; Li, W. C.; Huang, C. Y.; Yang, J. R.; Shing-Hoa Wang Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing183
3462009Cross-sectional observation of the intermetallic phase in a galvannealed steelKao, F. H.; Li, W. C.; Chen, C. Y.; Huang, C. Y.; Yang, J. R.; Shing-Hoa Wang Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing10
3472009The variation of beta phase morphology after creep and negative creep for duplex titanium alloysShing-Hoa Wang ; Lee, H. H.; Chen, C. Y.; Yang, J. R.; Kao, C. H.Journal of Materials Science3
3482009Measurements of microwave dielectric properties by an amended cavity perturbation techniqueJyh-Jong Sheen Measurement
3492009漁船溫室氣體排放長期監測及資料收集鄭元良 ; 丁培毅 
3502008Tribological and mechanical properties of HFCVD diamond-coated WC-Co substrates with different Cr interlayersChau-Chang Chou ; Lee, J. W.; Chen, Y. I.Surface & Coatings Technology
3512008STUDY ON MECHANICAL PROPERTIES OF A356 ALLOYS ENHANCED WITH PREFORMED THIXOTROPIC STRUCTUREShuei-Wan Juang ; Wu, S. M.Journal of Marine Science and Technology-Taiwan
3522008VARIABLE-THICKNESS BOUNDARY LAYERS FOR SLIDING MODE CONTROLChyun-Chau Fuh Journal of Marine Science and Technology-Taiwan
3532008Aerodynamic characteristics and thermal structure of nonpremixed reacting swirling wakes at low Reynolds numbersHuang, R. F.; Shun-Chang Yen Combustion and Flame19
3542008Synthesis of bio-functionalized copolymer particles bearing carboxyl groups via a microfluidic deviceShih-Hao Huang ; Khoo, H. S.; ChangChien, S. Y.; Tseng, F. G.Microfluidics and Nanofluidics8
3552008Effects of dynamic impact on mechanical properties and microstructure of special stainless steel weldmentsHsiao, W. Y.; Shing-Hoa Wang ; Chen, C. Y.; Yang, J. R.; Lee, W. S.Materials Chemistry and Physics9
3562008Evaluating bending fatigue strength of aluminum honeycomb sandwich beams using local parametersYi-Ming Jen ; Chang, L. Y.International Journal of Fatigue
3572008A dielectric resonator method of measuring dielectric properties of low loss materials in the microwave regionJyh-Jong Sheen Measurement Science and Technology
3582008Rheological behavior and tribological performance of a nanodiamond-dispersed lubricantChau-Chang Chou ; Hsuan-Shih Lee Journal of Materials Processing Technology
3592008Microstructure and magnetic variations induced by plastic deformation in Ni72Cr16Fe8Yao, Y. D.; Shing-Hoa Wang ; Chan, F. S.; Chen, C. Y.Journal of Applied Physics1
3602008Assessing the fatigue life of butt-welded joints under oblique loading by using local approachesYi-Ming Jen ; Chang, L. Y.; Fang, C. F.International Journal of Fatigue
3612008Losses of the parallel-plate dielectric resonatorJyh-Jong Sheen Iet Microwaves Antennas & Propagation
3622008A modified field model of waveguide reflection dielectric resonator for microwave measurements of dielectric propertiesJyh-Jong Sheen Journal of Applied Physics
3632008Inspecting profile errors of conjugate disk cams with coordinate measurementWu, L. L.; Fuh, K. H.; Chen-Chou Lin ; Wen-Tung Chang Journal of Manufacturing Science and Engineering-Transactions of the Asme
3642008The use of a modified sliding-mode controller with time-delay control for unknown systems with uncertain disturbancesChen, Y. D.; Tung, P. C.; Chyun-Chau Fuh ; Liao, C. H.Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering
3652008Interactions of tandem square cylinders at low Reynolds numbersShun-Chang Yen ; San, K. C.; Chuang, T. H.Experimental Thermal and Fluid Science61
3662008Relaxing welding residual stresses by diamond like carbon coating on duplex titanium alloysLee, H. H.; Shing-Hoa Wang ; Shih, C. Y.; Cheng, C. M.; Hsu, H. C.; Kan, K.; Sung, C. M.Science and Technology of Welding and Joining3
3672008Dielectric dispersion at microwave frequencies of some low loss mixed oxide perovskitesJyh-Jong Sheen ; Guo, R.; Bhalla, A. S.; Cross, L. E.Ferroelectrics Letters Section
3682008Absolute stability analysis for a class of Takagi-Sugeno fuzzy control systemsChyun-Chau Fuh International Journal of Systems Science
3692008漁船溫室氣體排放估算之研究鄭元良 ; 丁培毅 
3702008Prediction of cutting forces for face milling process and stresses estimation on cutting edgeC.R. Lin; J.S. Tsai; M.K. Dao; J. K. Ho ; C.K. Chang
3712008鑽石磨削工具製造與多晶鑽石加工之研究何靖國 ; 羅勝益; 蔡哲雄
3722007Modified Smith predictor scheme for periodic disturbance reduction in linear delay systemsChen, Y. D.; Tung, P. C.; Chyun-Chau Fuh Journal of Process Control
3732007Interfacial parameter analyses for sleeve-pin-shaft connections under axial and torsional cyclic loading using the finite element methodYi-Ming Jen ; Wei, C. L.Journal of Strain Analysis for Engineering Design
3742007Combining dither smoothing technique and state feedback linearization to control undifferentiable chaotic systemsTsai, H. H.; Chyun-Chau Fuh Chaos Solitons & Fractals
3752007The influence of Sc addition on the welding microstructure of Zr-based bulk metallic glass: The stability of the amorphous phaseShing-Hoa Wang ; Kuo, P. H.; Tsang, H. T.; Jeng, R. R.; Lin, Y. L.Applied Physics Letters5
3762007Microwave measurements of dielectric properties using a closed cylindrical cavity dielectric resonatorJyh-Jong Sheen Ieee Transactions on Dielectrics and Electrical Insulation
3772007PIV measurements of exit flow field of centrifugal fans with conditional samplingShun-Chang Yen ; Liu, J. H.Journal of Marine Science and Technology-Taiwan
3782007Cyclic deformation and phase transformation of 6Mo superaustenitic stainless steelShing-Hoa Wang ; Wu, C. C.; Chen, C. Y.; Yang, J. R.; Chiu, P. K.; Fang, J.Metals and Materials International19
3792007Investigation on vortex shedding of a swept-back wingShun-Chang Yen ; Hsu, C. M.Experimental Thermal and Fluid Science
3802007Amendment of cavity perturbation technique for loss tangent measurement at microwave frequenciesJyh-Jong Sheen Journal of Applied Physics
3812007An experimental study on active micro-vibration suppression of a flexible beam mounted on an elastic baseChu, C. L.; Wu, B. S.; Yih-Hwang Lin Measurement Science and Technology2
3822007Influence of boundary layer behavior on aerodynamic coefficients of a swept-back wingShun-Chang Yen ; Hsu, C. M.Journal of Fluids Engineering-Transactions of the Asme
3832007Prediction of low-cycle contact fatigue life of sleeve-pin-shaft connections under axial and torsional cyclic loadingYi-Ming Jen ; Yip, M. C.; Wei, C. L.; Shu, G. C.International Journal of Fatigue
3842007Inverse effect of strain rate on mechanical behavior and phase transformation of superaustenitic stainless steelWu, C. C.; Shing-Hoa Wang ; Chen, C. Y.; Yang, J. R.; Chiu, P. K.; Fang, J.Scripta Materialia38
3852007Bending embrittlement of as-wellded FeAl alloysChiang, C. C.; Shing-Hoa Wang ; Chen, J. S.; Chu, J. P.; Hsu, Y. F.Intermetallics7
3862007Adaptive parameter identification of servo control systems with noise and high-frequency uncertaintiesChyun-Chau Fuh ; Tsai, H. H.Mechanical Systems and Signal Processing
3872007Transient three-dimensional analysis of gas tungsten arc welding platesYeh, R. H.; Shih-Pin Liaw ; Tu, Y. P.Numerical Heat Transfer Part a-Applications13
3882007Robust modal vibration suppression of a flexible rotorYu, H. C.; Yih-Hwang Lin ; Chu, C. L.Mechanical Systems and Signal Processing18
3892007Flow patterns and wake structure of a swept-back wingShun-Chang Yen ; Hsu, C. M.Aiaa Journal
3902007漁船溫室氣體估算模式、清冊建立及估算系統建構之研究鄭元良 ; 丁培毅 
3912006Effect of size of lid-substrate adhesive on reliability of solder balls in thermally enhanced flip chip PBGA packagesYi-Ming Jen ; Fang, C. K.; Yeh, Y. H.Ieee Transactions on Components and Packaging Technologies
3922006Automated condition classification of a reciprocating compressor using time-frequency analysis and an artificial neural networkYih-Hwang Lin ; Wu, H. C.; Wu, C. Y.Smart Materials and Structures18
3932006Active vibration control of a flexible beam mounted on an elastic baseChu, C. L.; Wu, B. S.; Yih-Hwang Lin Finite Elements in Analysis and Design6
3942006Low-temperature electrical resistivity study of deformed Inconel alloy 600Chan, F. S.; Yao, Y. D.; Shing-Hoa Wang Journal of Magnetism and Magnetic Materials2
3952006The effect of strain ratio on morphology of dislocation in low cycle fatigued SAF 2205 DSSChiu, P. K.; Shing-Hoa Wang ; Yang, J. R.; Weng, K. L.; Fang, J.Materials Chemistry and Physics19
3962006Gamma (gamma) phase transformation in pulsed GTAW weld metal of duplex stainless steelShing-Hoa Wang ; Chiu, P. K.; Yang, J. R.; Fang, J.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing38
3972006Comparison of strain ratio effect on cyclic plastic deformation for special stainless steelsHuang, C. S.; Shing-Hoa Wang ; Wu, C. C.; Huang, Y. S.; Fang, J.Scripta Materialia10
3982006Exit flow field and performance of axial flow fansShun-Chang Yen ; Lin, F. K. T.Journal of Fluids Engineering-Transactions of the Asme
3992006Impact of the number of chips on the reliability of the solder balls for wire-bonded stacked-chip ball grid array packagesYi-Ming Jen ; Wu, Y. L.; Fang, C. K.Microelectronics Reliability
4002006Effect of lid materials on the solder ball reliability of thermally enhanced flip-chip plastic ball grid array packagesYi-Ming Jen ; Chien, H. H.; Lin, T. S.; Huang, S. H.Fracture and Strength of Solids Vi, Pts 1 and 2
4012006鑽石磨棒磨削多晶鑽石加工之研究羅勝益; 何靖國 ; 余宗翰; 林信憲
4022005Strain-induced electrical resistivity and magnetic behavior of paramagnetic Inconel alloy 600Shing-Hoa Wang ; Chan, F. S.; Yao, Y. D.Japanese Journal of Applied Physics Part 1-Regular Papers Brief Communications & Review Papers2
4032005A simple design of fins for boiling heat transferShih-Pin Liaw ; Yeh, R. H.; Yeh, W. T.International Journal of Heat and Mass Transfer7
4042005Low-cycle fatigue-induced martensitic transformation in SAF 2205 duplex stainless steelChiu, P. K.; Weng, K. L.; Shing-Hoa Wang ; Yang, J. R.; Huang, Y. S.; Fang, J. S.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing34
4052005Dynamic impact behavior and ferrite variation of special stainless steelsHuang, C. S.; Shing-Hoa Wang ; Lee, W. S.; Chen, T. H.; Lien, C.Scripta Materialia15
4062005Crack initiation life prediction for solid cylinders with transverse circular holes under in-phase and out-of-phase multiaxial loadingYi-Ming Jen ; Wang, W. W.International Journal of Fatigue
4072005Stabilizing unstable periodic orbits via universal input-output delayed-feedback controlChyun-Chau Fuh ; Tsai, H. H.; Tung, P. C.Nonlinear Dynamics1
4082005Study of microwave dielectric properties measurements by various resonance techniquesJyh-Jong Sheen Measurement
4092005Application of voice coil motors in active dynamic vibration absorbersChen, Y. D.; Chyun-Chau Fuh ; Tung, P. C.Ieee Transactions on Magnetics86
4102004Active modal control of a flexible rotorYih-Hwang Lin ; Yu, H. C.Mechanical Systems and Signal Processing7
4112004遠端操控水下機械臂系統應用於水下施工作業之技術研發張忠誠 ; 林鎮洲 ; 王榮華 ; 鄭慕德 工程科技通訊
4122004Optimal modal vibration suppression of a fluid-conveying pipe with a divergent modeYih-Hwang Lin ; Huang, R. C.; Chu, C. L.Journal of Sound and Vibration12
4132004Tensile properties of gas tungsten arc weldments in commercially pure titanium, Ti-6Al-4V and Ti-15V-3Al-3Sn-3Cr alloys at different strain ratesShing-Hoa Wang ; Wei, M. D.Science and Technology of Welding and Joining19
4142004人機介面監控之防止海生物成長系統之開發莊水旺 ; 潘榮進
4152004以TRIZ方法開發新型漁艙口蓋之研究莊水旺 ; 蔡恒光
4162003Mathematical model for prediction of intermittent drying and pressing process of mullet roeFan, C. C.; Shih-Pin Liaw ; Fu, W. R.; Pan, B. S.Journal of Food Science2
4172003Effect of initial microstructure on the creep behavior of TMCP EH36 and SM490C steelsShing-Hoa Wang ; Chiang, C. C.; Chan, S. L. I.Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing16
4182003Hydrogen permeation in a submerged arc weldment of TMCP steelShing-Hoa Wang ; Luu, W. C.; Ho, K. F.; Wu, J. K.Materials Chemistry and Physics48
4192003表面聲波生物感測器之製作與應用沈志忠 ; 楊啟榮; 林易賞
4202003蒸發管結霜之研究黃棋模; 黃國峰; 葉榮華; 廖世平 
4212002The response surface method and the analysis of mild oxidational wearLin, J. F.; Chau-Chang Chou Tribology International
4222002Effect of microstructural texture on the creep behaviorShing-Hoa Wang ; Chiang, C. C.; Chan, S. L. I.Journal of Materials Science
4232002A robust controller for chaotic systems under external excitationTsai, H. H.; Chyun-Chau Fuh ; Chang, C. N.Chaos Solitons & Fractals51
4242002A new approach to the effect of EP additive and surface roughness on the pitting fatigue of a line-contact systemChau-Chang Chou ; Lin, J. F.Journal of Tribology-Transactions of the Asme
4252002Control of discrete-time chaotic systems via feedback linearizationChyun-Chau Fuh ; Tsai, H. H.Chaos Solitons & Fractals33
4262002過冷溫度對冷凍性能的影響黃棋模; 鄭羽志; 葉榮華; 廖世平 
4272001Development of an intelligent underwater robotic manipulator systemChen-Chou Lin ; Chung-Cheng Chang ; Mu-Der Jeng ; Jung-Hua Wang 0
4282001Optimal weight design of rotor systems with oil-film bearings subjected to frequency constraintsYih-Hwang Lin ; Lin, S. C.Finite Elements in Analysis and Design17
4292001The effects of strain hardened layer on pitting formation during rolling contactChue, C. H.; Chung, H. H.; Lin, J. F.; Chau-Chang Chou Wear
4302001Active modal control of Timoshenko pipes conveying fluidYih-Hwang Lin ; Chu, C. L.Journal of the Chinese Institute of Engineers7
4312001用應變規量測主機馬力與主軸扭轉振動之研究洪瑞鴻; 林益煌 ; 吳忠恕
4322001電腦用微熱管之分析與實驗吳聲麟; 田華忠 
4332001小型船用柴油機排氣流量與溫度之理論預測蕭志豪; 葉榮華; 廖世平 
4342001智慧型水下機械臂系統技術研習與實作張忠誠 ; 鄭慕德 ; 王榮華 ; 林鎮洲 ; 曾世和工程科技通訊
4352000The fabrication and characterization of PZT thin film Acoustic Devices for application in underwater robotic systemsChung-Cheng Chang ; Jung-Hua Wang ; Mu-Der Jeng ; Chen-Chou Lin ; Chen, Kau-hsiungProceedings of the National Science Council : Part A, Physical Science and Engineering
4361999Models for temperature-kinetic aspect of friction and wear in oil lubricationLin, J. F.; Chau-Chang Chou ; Chen, S. T.Journal of Tribology-Transactions of the Asme
4371999Nonlinear optimal vibration suppression of Timoshenko beams traversed by a moving massYih-Hwang Lin ; Huang, J. R.Journal of the Chinese Institute of Engineers0
4381999Solidification of a liquid metal with natural convection in a thick-walled containerHwa-Chong Tien ; Wang, C. C.Chinese Journal of Mechanics-Series A
4391999A strong fractional cutting-plane algorithm for resource-constrained project schedulingSankaran, J. K.; Bricker, D. L.; Shuei-Wan Juang International Journal of Industrial Engineering-Theory Applications and Practice
4401999Computation of boiling water on circular finned tubesFan, C. C.; Shih-Pin Liaw International Communications in Heat and Mass Transfer4
4411999Application of the response surface method to the tribological analysis of a medium-carbon steel under mild-oxidational wearChau-Chang Chou ; Lin, J. F.Journal of Tribology-Transactions of the Asme
4421999Residual stress and its effect on corrosion behaviour of butt jointed Cu-Al alloysShing-Hoa Wang ; Shan, S. H.; Pan, Y. C.Science and Technology of Welding and Joining
4431999Creep deflection of viscoelastic laminated cylindrical panels with initial deflection under axial compressionNan-Nong Huang Composites Part B-Engineering
4441999船用低壓三效淡水機之簡易熱設計陳興財; 葉榮華; 廖世平 
4451998Viscoelastic analysis of creep response for uniaxially-compressed laminates with initial deflection including the effect of physical agingNan-Nong Huang International Journal of Solids and Structures
4461998The effect of physical aging on the viscoelastic response of cross-ply laminates to in-plane compressionNan-Nong Huang ; Chen, H. J.; Lee, C. F.Journal of the Chinese Institute of Engineers
4471998Evaluation of cumulative fatigue lives under different biaxial loading mode sequences for notched specimensYip, M. C.; Yi-Ming Jen Fracture and Strength of Solids, Pts 1 and 2: Pt 1: Fracture Mechanics of Materials; Pt 2: Behavior of Materials and Structure
4481998EH36 TMCP鋼材銲件機械性質之研究莊水旺 ; 陳燦錫
4491998智慧型水下機械臂之研究王榮華 ; 鄭慕德 ; 林鎮洲 ; 張恆毅; 張忠誠 
4501997Viscoelastic analysis of von Karman laminated plates under in-plane compression with initial deflectionNan-Nong Huang International Journal of Non-Linear Mechanics
4511997Nonlinear vibrations of Timoshenko pipes conveying fluidYih-Hwang Lin ; Tsai, Y. K.International Journal of Solids and Structures39
4521997Adaptive modal vibration control of a fluid-conveying cantilever pipeTsai, Y. K.; Yih-Hwang Lin Journal of Fluids and Structures23
4531997Thermoviscoelastic response of fiber-reinforced-plastic laminates with initial deflection imperfectionNan-Nong Huang Journal of Thermal Stresses
4541997Performance of a regulator design for vibration control of beams subjected to multiple moving loadsYih-Hwang Lin ; Cho, C. H.Journal of the Chinese Institute of Engineers2
4551997Non-linear active vibration control of a cantilever pipe conveying fluidYih-Hwang Lin ; Tsai, Y. K.Journal of Sound and Vibration12
4561997Dynamic behavior of beams and rectangular plates under moving loads - CommentYih-Hwang Lin Journal of Sound and Vibration9
4571997Mean strain effect on crack initiation lives for notched specimens under biaxial nonproportional loading pathsYip, M. C.; Yi-Ming Jen Journal of Engineering Materials and Technology-Transactions of the Asme
4581997Vibration analysis of beams traversed by uniform partially distributed moving masses - CommentYih-Hwang Lin Journal of Sound and Vibration14
4591997Tribological effects of roughness and running-in on oil-lubricated line contactsChau-Chang Chou ; Lin, J. F.Proceedings of the Institution of Mechanical Engineers Part J-Journal of Engineering Tribology
4601997Optimal vibration suppression in modal space for flexible beams subjected to moving loadsYih-Hwang Lin Shock and Vibration2
4611996Active flutter control of a cantilever tube conveying fluid using piezoelectric actuatorsYih-Hwang Lin ; Chu, C. L.Journal of Sound and Vibration27
4621996Biaxial fatigue crack initiation life prediction of solid cylindrical specimens with transverse circular holesYip, M. C.; Yi-Ming Jen International Journal of Fatigue
4631996Discretization considerations in moving load finite element beam modelsRieker, J. R.; Yih-Hwang Lin ; Trethewey, M. W.Finite Elements in Analysis and Design55
4641996Influences of Fuel Sulfur Content on Diesel Engine Emission Characteristics Under Varying Temperature and Humidity of Inlet Air,Cherng–Yuan Lin ; Yuan-Liang Jeng ; Chu-Sheng Wu; Kuo-Jenn Wu
4651995NOTCH EFFECT ON 2-LEVEL CUMULATIVE LOW-CYCLE FATIGUE LIFE UNDER DIFFERENT BIAXIAL LOADING MODE SEQUENCESYip, M. C.; Yi-Ming Jen Fatigue & Fracture of Engineering Materials & Structures
4661995SIMULATION, ANIMATION, AND ANALYSIS OF DESIGN DISASSEMBLY FOR MAINTAINABILITY ANALYSISVujosevic, R.; Raskar, R.; Yetukuri, N. V.; Jothishankar, M. C.; Shuei-Wan Juang International Journal of Production Research
4671995NUMERICAL EVALUATION FOR STABILITY AND PERFORMANCE OF AN ELECTRONIC DAMPING DEVICE FOR STRUCTURAL VIBRATION CONTROLYih-Hwang Lin ; Chu, C. L.Journal of Sound and Vibration3
4681995DYNAMIC-RESPONSE OF A BEAM WITH INTERMEDIATE POINT CONSTRAINTS SUBJECT TO A MOVING LOAD - COMMENTYih-Hwang Lin Journal of Sound and Vibration3
4691995A NEW DESIGN FOR INDEPENDENT MODAL SPACE CONTROL OF GENERAL DYNAMIC-SYSTEMSYih-Hwang Lin ; Chu, C. L.Journal of Sound and Vibration18
4701995STRONTIUM ALUMINUM TANTALUM OXIDE AND STRONTIUM ALUMINUM NIOBIUM OXIDE AS POTENTIAL SUBSTRATES FOR HTSC THIN-FILMSGuo, R. Y.; Bhalla, A. S.; Jyh-Jong Sheen ; Ainger, F. W.; Erdei, S.; Subbarao, E. C.; Cross, L. E.Journal of Materials Research
4711995FINITE-ELEMENT ANALYSIS OF FLUID-CONVEYING TIMOSHENKO PIPESChu, C. L.; Yih-Hwang Lin Shock and Vibration10
4721995EXACT ANALYSIS FOR 3-DIMENSIONAL FREE-VIBRATIONS OF CROSS-PLY CYLINDRICAL AND DOUBLY-CURVED LAMINATESNan-Nong Huang Acta Mechanica
4731994船速與船舶軌跡量測之即時差分式全球衛星定位系統柯永澤; 李台生; 楊國誠 ; 李耀輝 ; 高聖龍 中國造船暨輪機工程學刊